• Journal of the Korean Wood Science and Technology
• /
• v.40 no.1
• /
• pp.53-59
• /
• 2012

This study used pine wilt disease damaged trees as raw materials. The damaged woods were subjected to soaking treatment using wood vinegar, nematicide and sea water, fumigated treatment using fumigation, and the bending strength and hardness of the timber were measured at different points of time after the treatment. In soaking treatment, the highest bending strength was obtained from wood vinegar (100 fold dilution)-soaked specimens of Pinus densiflora and the nematicide-soaked specimens of Pinus thunbergii. The highest hardness in cross section was gained from the nematicide-soaked specimens of Pinus densiflora and Pinus thunbergii, the highest hardness in radial section was obtained from the nematicide-soaked specimens of Pinus densiflora and wood vinegar (100 fold dilution)-soaked specimens of Pinus thunbergii, and the highest hardness in tangential section was obtained from the nematicide-soaked specimens of Pinus densiflora and Pinus thunbergii, and there were not significantly different among the treatments. When fumigated treatment was applied, bending strength, hardness was somewhat lower in the control but were not significantly different between the treatments.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.314-314
• /
• 2022

In the production of rice flour, wet milling is a method of milling rice after soaking it in water, and it takes a lot of time and cost from milling to drying. To overcome this problem, the floury type rice was developed for dry milling and it is known to have round starch granules, low content of damaged starch after milling, and a starch structure similar to wheat. Because of its unique properties different from normal rice, it is necessary to research on processing and characteristics of floury-type rice to expand its utility in the food industry. Therefore, this study aimed to prepare the pregelatinized floury type rice (Baromi2) by autoclave and investigate their physicochemical properties. As the heat treatment time increased, the brightness decreased from 83.8 to 76.8, however, both redness and yellowness increased from 0.57 to 4.5 and from 14.58 to 21.13, respectively. Despite of same treatment time, soaking in water (10 min) before autoclaving increased the solubility and swelling power of Baromi2 over 2 times. The peak viscosity of native Baromi2 was over 2000 RVU, on the other hand, there was a significantly decrease to less than 1000 RVU of pregelatinized Baromi2. Heat treatment without immersion caused partial gelatinization of starch, resulting that some starch granules maintaining their integrity. Whereas there were no starch granules in heat treatment with soaking in water due to complete gelatinization. This study would be helpful to the suggestion of using heat-treated floury-type rice as an intermediate material in the food industry in the future.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.2
• /
• pp.69-74
• /
• 1987

The effects of soaking temperature on hydration and cooking rates of Chunmabyeo(Japonica) and Kayabyeo(J/Indica) rice were investigated. Water uptake and volume increase rates of milled rice were increased as a function of soaking temperature$(4^{\circ}C{\sim}30^{\circ}C)$. The rate of volume increase of milled rice was greater than that of weight increase, which was more pronounced at low soaking temperature. The soaking of milled rice prior to cooking had a definite effect on the degree of gelatinization. The soaked milled rice was more easily gelatinized than unseated one. The water uptake rate, volume increase rate, degree of gelatinization and cooking rate of milled rice were faster in Kayabyeo than Chunmabyeo.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.1
• /
• pp.114-122
• /
• 1994

A cold temperature control system for the BAF(batch annealing furnace) has been established in order to reduce energy consumption to imrpove productivity and stabilize the properties of products. Therefore we confirmed a relation between annealing cycle time and atmospheric gas, changing annealing cycle time according to BAF temperature with time during heating and actual temperature measurements cold spot during soaking. The results of the temperature variation effect on the batch annealing are as follows. 1) Cooling rate is increasing gradually with increasing atmospheric gas flow, but heating rate is hardly increasing without atmospheric gas component. Heating time is reduced to one half with increasing atmospheric gas flow rate and changing of atmospheric gas component from HNx to Ax gas and annealing cycle time is reduce to 2.7 times. 2) With enlarging the difference between furnace temperature and soaking temperature at the HNx BAF, heating time becomes short, but cooling time is indifferent. 3) If temperature difference of 300.deg. C in the temperature change of cold spot according to the annealing cycle control temperature, Hi-CON/H2BAF is interchanging at each other at 26hours, but HNxBAF at 50 hours. 4) Soaking time at batch annealing cycle determination is made a decision by the input coil width, and soaking time for quality homogenization of 1219 mm width coil must be 2.5 hours longer then that of 914mm width coil for the same coil weight at Hi-CON/H2BAF. But, it is necessary to make 2 hours longer at HNxBAF.

• Korean journal of food and cookery science
• /
• v.30 no.2
• /
• pp.200-211
• /
• 2014

This study was conducted to identify the sensory characteristics of four kinds of wild vegetables (samnamul, miyeokchwi, daraesoon and bangpung namul), which were prepared through three different soaking methods: SBS (soaking both before and after boiling), BS (soaking only after boiling) and B (never soaking). Moreover, it also compared the consumer acceptance of these samples in Korea. A descriptive analysis was performed on 12 samples (Sam_SBS, Sam_BS, Sam_B, Miyeokchwi_SBS, Miyeokchwi_BS, Miyeokchwi_B, Daraesoon_SBS, Daraesoon_BS, Daraesoon_B, Bangpung_SBS, Bangpung_BS and Bangpung_B) by 10 trained panelists. Furthermore, 115 consumers evaluated the overall acceptance (OL), acceptance of appearance (APPL), odor (ODL), flavor (FLL), and texture (TXTL) of the samples using a 9-point hedonic scale; they also rated the perceived intensities of toughness, roughness and moistness using a 9-point just-about-right (JAR) scale. According to the results of the PLSR data, the Sam_SBS sample, which had significantly (p<0.05) high muddiness, moistness, brightness, redness, oily appearance, sesame oil flavor, softness and greasy attribute scores, presented the highest acceptability and consumer desire scores for consumers. On the other hand, the Miyeokchwi_B and Bangpung_B samples, which had relatively high toughness, crispiness, roughness, bitterness and, astringent attributes scores, were the least preferred samples. Therefore, the muddiness, moistness, brightness, oily appearance, sesame oil flavor, softness and greasy attributes were drivers of "liking," whereas toughness, crispiness, roughness, bitterness, astringent attributes acted as drivers of "disliking" for consumers.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.3
• /
• pp.229-235
• /
• 1995

We were studied to the effect of alloying element and retained austenite on a mechnical properties and that used steels were composed three types composition. According to the soaking temperature, a retained austenite was pricipitated in the bainitic ferrite matrix and it was pricipitated to a flake type of about $2{\mu}m$, a mixture of massive and bar type and a flake type of about $1{\mu}m$ size. Through x-ray diffraction analysis, the amount of retained austenite was increased with addition of Si and Ni for equal heat treatment condition and it was best abundanted in the soaking temperature of $855^{\circ}C$. The balance value of strength and elongation were complexly controlled not only a retained austenite formation but also a formation characteristic and shape of the retained austenite and bainite. The balance value of strength and elongation were most satisfactory obtained with "B" and "C" specimens in a firstly heat treated at $855^{\circ}C$ and the best result was that a $2840kg/mm^2.%$ with the heat teratment condition of $855^{\circ}C-400^{\circ}C$ used for "C" specimen.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.287-287
• /
• 2017

The objective of this study was to evaluate difference of quality properties of between fresh cooked rice and re-heated cooked rice after retrogradation. Nine rice varieties raised by NICS were compared the properties of physicochemical, texture, sensory evaluation, toyo glossiness value, pasting properties. Among nine rice cultivars, the changes of weight and length-width ratio of after soaking as well as cooking showed how water absorbed in each rice granule. The amount of water absorption after soaking was highest in Wolback (semi-waxy), Hiami and lowest in Samgwang, Seonpum, Ilpum. After cooking, the amount of water absorption was high in Dasan 1 and Andabyeo, however low in Ilpum. In the length-width ratio after soaking, Wolback (semi-waxy cultivar) and Anda (indica cultivar) increase their volume relatively as their shape are while others increased more in length than width. Among cooked rice, the highest value of length-width ratio shows in Anda, Dasan1, Hiami and Seonpum, the Wolbak was similar to that of non-glutinous rice. After cooking, the others stored at $10^{\circ}C$ for 16 hours for retrogradation (imitated at convenience store). Then re-heated using by microwave. Pasting properties were considerably affected by storage temperature and periods of rice. The setback showed in the following order: Wolback (-92.25 RVU, the lowest retrogradation) < Seonpum (-35.20) < Chindle (-22.08) < Jungsanggold (-21.98). Toyo glossiness value of cooked rice showed in the following order: Chindle (82.40) > Samgwang (79.43) > Hiami (79.23). Sensory evaluation of re-heated rice of Jungsanggold, Samgwang, and Chindle were 78.97, 78.36, and 77.35, respectively. Hardness, elasticity, and toughness of re-heated rice ware increased compared to cooked rice, whereas cohesiveness was decreased. Hardness and elasticity is higher in Seonpum, Dasan1 and Hiami, toughness is higher in Jungsanggold, Samgwang and Wolbak. Cohesiveness of Jungsanggold and wolbak showed higher than others.

• Journal of the Korean Ceramic Society
• /
• v.33 no.7
• /
• pp.735-742
• /
• 1996

Antimony-doped Tin oxide (ATO) thin films were deposited on soda-lime glass substrates by DC magnetron sputtering technique. Effects of DC power film thickness and post heat-treatment on electrical conductivity of ATO film were investigated. Other properties of ATO film such as optical anti-chemical and wear properties were also reported in this work. The obtained ATO films showed electrical resistivities ranging from 5$\times$10-3 $\Omega$cm to 3$\times$10-3 $\Omega$cm with the average optical transparency above 80% in visible wavelength range and excel-lent anti-chemical properties where the electrical resistivity was not changed even after soaking the films in 1M HCl or 1M NaOH solution for 10 days. These properties were found to be related to the crystallinity of ATO film and the films having higher crystallinity showed better properties.

• The Korean Journal of Food And Nutrition
• /
• v.33 no.4
• /
• pp.440-446
• /
• 2020

The purpose of this study was to derive the conditions for manufacturing rice porridge with optimum properties after reheating. The characteristics of rice porridge according to the soaking time, water addition rate, heating temperature, heating time, and cooling conditions were compared using the 'Samkwang' cultivar. In Step I, as the heating temperature increased, the weight change decreased and the viscosity increased, and the temperature known as the main factor of the gelatinization also appeared to affect the viscosity increase. In Step II, the viscosity and the texture properties was not significantly different as the soaking time was reduced, and 10 minutes was suitable because of due to the shortening effect of the total process time. In Step III, the residual heat was lowered by cooling after the rice porridge production, so the viscosity could be greatly reduced. Also, it was confirmed that the water addition rate of 900% and the heating temperature of 15 minutes were optimal manufacturing conditions. The next study will investigate the porridge processability of rice cultivars using these results.

• Applied Biological Chemistry
• /
• v.40 no.3
• /
• pp.225-231
• /
• 1997

Optimization theory was applied to a native and two imported soybeans. Failure stress and stress relaxation curve was measured with rheometer, and color was measured by colorimeter. The effects of each soybean upon the tofu texture were expressed through a non-linear canonical regression model and trace plot. Compared to the other imported soybeans, native soybean produced a higher strength in tofu texture, and showed the positive increase in viscoelastic properties such as instantaneous stress, equilibrium stress and relaxation time, whereas it had no effect on whiteness from reference blend, represented that native soy-bean showed the individual strength upon the selected rheological texture properties. Higher soaking ability in native soybean was selected as a new response for the optimization mixture process, and it contributed positively to the rheological properties of tofu. New soaking process control system during processing and desirability for the mathematical model should be applied for a better mixture design in varieties of soybeans.