• Journal of the Korean Society of Tobacco Science
• /
• v.7 no.1
• /
• pp.67-74
• /
• 1985

Cis-trans forms of fatty acids in cigarette smoke condensate were separated and characterized using SP 2340 glass capillary gas chromatography. The transforms of fatty acids, palmitoeladic , 1-vaccenic, eladic and linoeladic acid were identified. These components were not present only 3% of the total fatty acid fraction, but they showed a very low transfer rate.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.1
• /
• pp.19-25
• /
• 1998

The bulk curing experiment to the improve the quality of flue-cured leaves were carried out to evaluate relationship between cyclic curing and conventional curing method. We studied the effect of the cyclic change of wet bulb temperature at the yellowing stage of flue curing on chemical properties of cured leaves. The wet bulb temperature was automatically controlled between preset high($38^{\circ}C$) and low point ($35^{\circ}C$) everyone hour cyclically during 12 hours after starting luring. As a result, the acceleration of the increase in the chemical properties of cured leaves were observed. As to the chemical properties, there was decreased in citric acid, increased in malic acid of the nonvolatile organic acids and all higher fatty acids content of leaves cured by this method compared with in that of conventional curing method, while a major chemical compounds in relation to aromatic essence of cigarette smoke in essential oil components of lured leaves was mostly higher in this method than those of conventional ones, and it was evaluated that there was decreased in CO, TPM, Tar, and $CO_2$ content of the cigarette smoke comparing to the conventional luring method.

• Journal of the Korean Society of Tobacco Science
• /
• v.17 no.2
• /
• pp.139-148
• /
• 1995

This study was carried out to investigate the effects of super heated steam on the physical and chemical changes of burley cut tobacco. Total sugar, total alkaloid, ether extracts, crude ash, total nitrogen and pH for leaf chemical constituents were analyzed. Filling power and fineness index for physical properties, and carbonyl compounds, phenol compounds, amonia, pH, hydrogen cyanide nicotine, carbon monoxide, total volatile base and tar for smoke components were also analyzed. The cut tobacco treated with super heated steam showed significant decrease in total sugar and total alkaloid. The filling power of the sample treated with the super heated steam system was increased abruptly when heated at over 250℃. The fineness index showed similar tendency to that of common toast method. Super heated steam treatment slightly decreased carbonyl compounds, phenol compounds, hydrogen cyanide, nicotine, carbon monoxide and tar in the tobacco. Especially the decrease of ammonia was the most remarkable. The pH of smoke was a little different compared with that in the common toast. The sensory test results showed that, compared to the common conveyer moving system, the tobacco treated with super heated steam system brought out more roasted flavor, lowered impact, irritation, and sting, further improved aftertaste, and lowered bitterness. The super heated steam treatment method used in the studies is expected to give better filling power, mild taste and toasted odor of tobacco than that of the common method for toast treatment. Key words : burley tobacco, super heated steam, expansion, toast.

• Journal of the Korean Society of Tobacco Science
• /
• v.15 no.1
• /
• pp.98-105
• /
• 1993

The chemical components of tobacco stalk, stems of tobacco caltivations, were analyzed and reconstituted tobacco sheet were made from the stalk and tobacco hyproducts by rolled and paper reconstitute tobacco sheet making process. The results were summarized as follow 1. In the viewpoint of chemical components, nicotine, total nitrogen and ash content of stalk were lower than those of stems, but crude fiber was two times higher than stems. 2. Reconstituted tobacco sheet of tobacco stalk blended were improved fragility and specific gravity than those of control. 3. Smoke components delivery of cigarette made from reconstituted tobacco sheet of tobacco stalk blended were similar to control cigarette. 4. According to the result of ranking preference test for control and sample cigarette, were not recognized significant at 5 percent level. 5. According to the result of areas test for control and sample cigarette, were not recognized significant at 5 percent level. 6. Optimum stalk blend ratio of reconstituted tobacco sheet manufacturing was from about 20 to 40% to the rolled sheet, and was from about 5 to 10% to the paper making process tobacco sheet.

• Journal of the Korean Society of Tobacco Science
• /
• v.23 no.1
• /
• pp.31-39
• /
• 2001

This study was carried out to investigate the changes of physical and chemical properties and the usability of long-term stored leaf tobacco. The physical chemical properties of the flue-cured and burley leaves produced in 1993, processed in 1994 were analysed from Nov. 1996 to Nov. 1999. The pH and moisture content in leaf decreased slowly until 4 years’storage after processing, while those of leaf changed little thereafter. However, total sugar content continuously decreased until 5 years after processing. The filling capacity increased and shatter resistance index decreased in long-term stored leaf. The sensory test, cilia stasis and the chemical components of cigarette smoke had no significant differences between short and long-term stored leaves. When the processed leaves were stored till 5 years after processing, there were no deteriorative effects on quality and usability of leaf tobacco. Therefore, it is considered that the processed leaf may be stored for 5 years or more under the inevitable situation.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.E
• /
• pp.41-58
• /
• 1998

In this study, a wide range of volatile organic constituents of environmental tobacco smoke (ETS) were determined using an environmental chamber, where ETS is the sole source of target compounds. ETS was generated in an environmental chamber by a number of different cigarettes, including the Kentucky reference cigarette and eight different commercial brands. More than 30 compounds were measured simultaneously for a total of twelve experimental runs. The target compounds are classified into three major classes, i.e. vapor phase ETS markers including 3-ethnylpyridine (3-EP) and nicotine, carbonyl compounds including formaldehyde, and volatile organic compounds (VOCs). The results from the chamber study were used to generate characterized ratios of selected VOCs to 3-EP, a vapor phase ETS marker. Emission factors for VOCs associated with ETS were also estimated. The characteristic ratios appeared to be generally in good agreement with published data obtained by environmental chamber studies similar to this study. This implies that the ratios may be useful for identifying and quantifying the impact of ETS as a source of target compounds in 'real world' indoor environments, which is affected by a complex mixture of multi-sources. The environmental chamber method described here provides a direct and reliable method to compare the ETS generated by different cigarettes. The method can also be applied to the simultaneous determination of many different ETS components.

• Applied Biological Chemistry
• /
• v.20 no.1
• /
• pp.117-122
• /
• 1977

Development of new burning additives against nitrate salts used in past tobacco industry examined to reduce harmful nitrogenous compounds in smoke. Among several additives treated, the best effect by means of elevation of combustibility and reduction of tar and nicotin contents in smoke was observed by adding sodium citrate from 0.6 to 1% in tabacco. The following results were obtained through investigating combustibility, chemical composition, and differential thermal analysis of the tabacco treated with the buring additives. 1) The close relation was observed between the levels of the smoke components and combustibility of the treated tabacco. 2) Differential thermal analysis (D.T.A.) of citrate-treated tobacco shows an increase in H. Value and a decrease in L. Value as compared with other tobacco sample. 3) The D.T.A. of sodium-nitrate and sodium-citrate shows that sodium-nitrate gives endothermal reaction at $270^{\circ}$ and $310^{\circ}$ and sodium citrate gives exothermal reaction at $290^{\circ}$ with endothermal reaction at $170^{\circ}\;and\;310^{\circ}$. 4) $Na_3-citrate-treated$ tobacco shows an increase in smoke generation between room temperature and $350^{\circ}$ (Zone A) and a decrease in smoke generation between $350^{\circ}$ and $900^{\circ}$ (Zone B) compared with untreated tobacco. The smoke from these tobacco also contains lower levels of Tar, Nicotine, Phenols, Nitrogen oxides and Benzpyrene, and elevation of static Burning rate.

• Journal of the Korean Society of Tobacco Science
• /
• v.27 no.1 s.53
• /
• pp.83-93
• /
• 2005

This study was conducted to evaluate the effect of additives in low sidestream cigarette papers, such as Mg$(OH)__2,\;TiO_2\;and\;KH_{2}PO_4$ on the delivery of mainstream and sidestream smoke. From the analysis of tar and nicotine in sidestream and mainstream smoke, the delivered ratios of tar and nicotine by sidestream to mainstream smoke in common cigarette paper were 5.32 and 8.60, respectively. However, the delivered ratios of those of the paper containing $Mg(OH)_2\;were\;2.25\~3.23,\;4.86\~7.14,\;Mg(OH)_2\;and\;KH_{2}PO_4\;were\;2.12\~2.92,\;4.67\~6.89,\;TiO_2\;was\;3.21,\;7.51 $ respectively. The deliver patterns of semi-volatile components in the cigarettes were similar each there, but a slight different pattern in the amount was observed depending on the kinds of compounds added in cigarette papers. In the cigarettes made of $Mg(OH)_2$ added paper, the aromatic components such as benzene, toluene and phenol were generated more while the aliphatic components like neophytadiene, ethyl decanoate were delivered less than the cigarettes made of common cigarette papers. However, the cigarettes manufactured with $Mg(OH)_2\;and\;KH_2PO_4$ added paper showed an opposite trend. The cigarettes made of $TiO_2$ added paper showed relatively low delivery in the most compounds measured. In sensory evaluation, cigarette papers tested were noticed a distinguishable sensory character between the low sidestream smokes with additive cigarette papers except $TiO_2$ added one. Moreover, aroma patterns detected by a electronic nose system in TPM were a similar tendency.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.2
• /
• pp.251-256
• /
• 2002

Fresh bamboo (Phyllostachys bambuoides sieb. et zucc.) was charred at the mechanical steel kiln and traditional earth kiln with subsequent condensation of its smoke to 10$0^{\circ}C$. It was settled down for 12 months to remove tar components and then the middle layer of the liquid was collected as a bamboo smoke distillates to analyze its chemical composition and physicochemical characteristics for use as food additives or processing aids. The gravity, transmittance, reflectivity, and viscosity were 1.008, 89.05%, 1.36%, and 12.48 cp in the bamboo smoke distillates processed by mechanical steel kiln (MBSD) and 1.012, 98.33%, 1.34% and 9.05 cp in the bamboo smoke distillates by traditional earth kiln (TBSD), respectively. The color of TSBD was brighter than that of MBSD. The pH and titratable acidity, tar and remains were 3.55 and 2.830%, 2.803% and 0.671%, respectively, in the MBSD and 2.93 and 3.470%, 0.051% and 0.004%, respectively, in the TBSD. The major phenolic compounds of bamboo smoke distillates (BSD) were phenol, Ο-cresol, p-cresol, and guaiacol and the major organic acids were acetic acid, propionic acid, iso-butyric acid, and n-butyric acid, and major alcohols were methanol, furfuryl alcohol, and maltol. The contents of phenolic compound and alcohol were more in MBSD than in TBSD whereas the content of organic acid was more in TBSD than in MBSD. Therefore, toxic compounds for the human body, such as methanol from BSD should be removed for use as a food ingredient in the future.

• Journal of the Korean Society of Tobacco Science
• /
• v.26 no.1
• /
• pp.35-42
• /
• 2004

This study was carried out to examinate the effect of aging period on chromatic, chemical and organoleptic characteristics, and to evaluate of optimum aging period for each grade in burley leaf tobacco. The leaf tobaccos were produced in 2000, and threshed, redried and packed in carton box under the current methods. Four grades of processed leaf(A3T, B1T, C1W and D3W) were stored during 24 months (May 10, 2001 to April 31, 2003) in warehouse of Chungju Leaf Tobacco Processing Factory. The leaf tobaccos were sampled at three month intervals for analysis of chromatic, chemical and organoleptic properties. pH values of four grades, and Yellow(b) of A3T and BIT were also significantly decreased during the aging. Filling values, tar, nicotine and CO contents of tobacco smoke, and puff number of cigarettes were not significantly changed during the aging. Positive correlation coefficients were significantly observed between irritation of the calculated attributes from contents of volatile oil components in leaf tobacco and that of the panel sensory attributes. The ratio of maximum change in irritation attribute was larger than that in taste attribute during aging. The calculated irritations of 18～24 months aging for A3T and B1T were significantly lower than zero-aging, while those of C1W and D3W were not significant among aging periods. The panel irritations of 12～15 months aging for four grades were low tendency. The results suggest that decrease of aging period for thin leaf from 21～24 to 12～15 months may be beneficial to save storage cost in burley tobacco.