• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1987.11a
• /
• pp.39-46
• /
• 1987

액정(liquid crystal)은 고체 결정과 등방성 액체의 사이에서 발견되는 중간형태의 물질상태이다. 액정은 일반 유체와 같이 흐를뿐만 아니라 고체가 갖는 이방성 특징을 동시에 갖는다. 액정의 점도는 일반적으로 10-100 Cp 이며 점도가 낮은 기계류 윤활유에 해당한다. 이방성의 특징은 분자들의 긴 간격의 배열에 기인되며 광학적 birefringence로 쉽게 나타나진다. 액정은 세가지 형태로 나누어진다. Thermotropic 액정은 순수화합물이나 균질한 혼합물에서 관찰되는데 온도의 변화에 따라 상이 벼노하한다. 일반적으로 이 액정은 nematic, cholestric, 그리고 smectic 상으로 구분되며 Fig.2에 나타나 있다. Lyotropic 액정은 비누와 같은 amphiphilic분자들이 물과같은 적당한 용매에 용해할 때 나타난다. 이 액정은 Thermotropic 액정과 달리 농도가 상을 결정하는 주요한 변수이다. Polymer 용액은 액정배열을 가지며 Polymeric 액정이라고 불린다. 지금까지 액정에 관해 알려진 지식은 thermotrpic 액정에 관한 것이며 여기서는 이 액정에 관해서만 기술한다.

• Journal of Information Display
• /
• v.2 no.1
• /
• pp.1-4
• /
• 2001

We propose a dual in-plane parallel electrode structure of a vertical configuration of a helix-deformed ferroelectric liquid crystal (HDFLC) mode for better brightness than a single in-plain electrode case. This structure provides high brightness in addition to the analog gray scale capability, fast response, and wide-viewing characteristics. In contrast to a conventional HDFLC in a planar geometry, smectic layers arrange themselves parallel to the substrates and thus extremely uniform alignment of molecules in a large area is naturally achieved in our new configuration.

• Korean Journal of Materials Research
• /
• v.3 no.3
• /
• pp.223-229
• /
• 1993

A homologous series of cholesteryl biphenyl ester derivatives was prepared. The thermal behaviors of compounds were studied by differential scanning calorimetry and by polarizing microscope equipped with a hot-stage. The cholesteric phase is present in all the compounds, whereas the smectic one is absent in the compounds with R = 1 and 2. The compounds possessed higher phase transitiof' temperature and wider temperature range of meso phase in comparison with known cholesteric liquid crystal phases.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.445-448
• /
• 2002

New banana-shaped achiral compounds, 1,3-phenylene bis [4-{4-(7-octenyloxy)phenyliminomethyl}benzoate](PBOEB), 1,3-phenylene bis [4-{3-fluoro-4-(7-octenyloxy)phenyliminomethyl}benzoate] (PBFOEB), 1,3-phenylene bis [4-{4-(10-undecyloxy)phenyliminomethyl}benzoate](PBEUB), and 1,3phenylene bis [4-{3-fluoro-4-(10-undecyloxy)phenyliminomethyl}benzoate](PBFEUB) were obtained by general synthetic methods. PBOEB and PBFOEB having the octenyloxy groups such as $-(CH_2)_6CH=CH_2$ showed ferroelectric switching, and their values of spontaneous polarization on reversal of an applied electric field were 120 nC/$cm^2$ and 225 nC/$cm^2$, respectively. PBEUB and PBFEUB having the undecyloxy groups such as $-{CH_2)_9CH=CH_2$ showed antiferroelectric switching, and their values of spontaneous polarization on reversal of an applied electric field were 120 nC/$cm^2$ and 140 nC/$cm^2$, respectively. We could obtain ferroelectric and antiferroelectric phases by controlling the number of carbon atom in alkenyloxy chains of bent-core molecules.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.247-253
• /
• 2019

In this study, compounds with azo-mesogenic groups at 4-, 3,5-, or 3,4,5-positions of one phenyl ring were synthesized, and their liquid crystallinity and photochemistry were investigated. The compounds in the Azo1 and Azo2 series had linear and planar geometries, respectively, while those in the Azo3 series had relatively bulky structures. Compounds of BA-Azo2 and BA-Azo3 did not show any liquid crystallinity. Compounds of BE-Azo1 and BE-Azo2 exhibited a monotropic liquid crystallinity, while the other compounds showed an enantiotropic liquid crystallinity. The liquid crystalline behavior was imparted by the azo-mesogenic groups, and most of the liquid crystalline compounds formed a smectic phase. All the RM-AzoX compounds exhibited photoisomerism because of the presence of the azo groups in the molecule. The rate of photoisomerization followed the order of RM-Azo3 < RM-Azo1 < RM-Azo2 and was considered to depend on the steric hindrance around the azobenzene groups in the molecule. These results suggest that the liquid crystallinity and photochemical property of the compounds are affected by the position or the number of azo-mesogenic groups phenyl ring of the molecule.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.489-492
• /
• 2005

We report new polymer stabilized ferroelectric liquid crystal (PSFLC) cells with mechanical stability which is achievable by introducing photospacers in the cells. It was found that the mechanical st ability of the PSFLC cell was effected by introduction of photo spacers. We analyzed the dependence of mechanical stability and memory property on the density of photospacers in the PSFLC cell. The stability and memory properties of PSFLC Cells depending on photospacer density are discussed. 1. Introduction Recently, flexible displays have attracted much attention because they have remarkable advantages: thinner, lighter, non-breakable and conformable features. Flexible displays have various potential applications such as e-book and e-paper displays utilizing the distinct features. E-book and E-paper displays demand very low power consumption, so that bistable memory liquid crystal modes are required in case of flexible plastic LCDs for those application. Three kinds of memory LC modes have been developed; bistable nematic, bistable cholesteric and bistable FLC. Among them SSFLC as one of bistable FLC has big advantages such as low driving voltage, wide view angle and fast response time, SSFLC cells are, however, very weak against mechanical shock. Polymer stabilized FLC (PSFLC) has been developed to overcome the poor mechanical stability of SSFLC. PSFLC was known to have network structure that FLCs are oriented with smectic layer ordering in polymer network. The polymer network stabilizes the FLC orientation, which leads to improvement of mechanical stability of PSFLCD. A lot of studies have been done for the application of PSFLC to flexible $LCDs.^{[1{\sim}12]}$ However, it should be noted that PSFLC does not have sufficient mechanical stability for the particular applications such as smart card LCD, where LCD is highly bendable.Bead spacer was mainly used to maintain cell gap of conventional PSFLCDs. But the spacer density of it is not locally uniform in the cell, so that it is generally difficult that the PSFLCDs with bead spacers show sufficient mechanical stability. In order to more improve the mechanical stability of PSFLCDs, we introduced photospacers into PSFLCDs. In this paper, we describe the improvement of mechanical stability by introducing photospacers into PSFLCDs.