• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.5
• /
• pp.311-318
• /
• 2013

Recently, there have been many studies on RFID-based SCM. Yet, studies of synchronizing errors caused by tracking logistics information in supply chain, and activating & monitoring RFID infra is still insufficient. Also, there is no case of developing the intelligent SCM system enabling total monitoring and controlling RFID Infra by applying these technologies. Logistics information synchronization based Smart SCM model is intelligent supply chain service model to monitor the status of the RFID equipments in supply chain and the synchronization of the logistics process in each logistics point through one integrated view, as well as to react instantly by providing the information to help the various decision makings, when the emergency occurs. By adopting global logistics standard, RFID related standard specification, EPCIS standard, and SSI middleware platform, this model provides the domestic standard specification.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1275-1284
• /
• 2010

100 MHz bandwidth and 1 Gbit/s data speed are needed in LTE-advanced for the next generation mobile communication system. Therefore, spectrum aggregation method has been studied recently to extend usable frequency bands. Also bandwidth utilization is increased since vacant frequencies are used to communicate. However, transceiver structure requires the digital RF and SDR. Therefore, frequency synthesizer and PA must operate over wide-bandwidth and RF impairments also increases in transceiver. Uplink of LTE advanced uses DFT-S OFDM using plural power amplifier. The effect of ICI increases in frequency domain of receiver due to phase noise and IQ imbalance. In this paper, we analyze influences of ICI in frequency domain of receiver considering phase noise and IQ imbalance in multiband system. Also, we separate phase noise and IQ imbalance effect from channel response in frequency domain of uplink system. And we propose a method to estimate the channel exactly and to compensate IQ imbalance and phase noise. Simulation result shows that the proposed method achieves the 2 dB performance gain of BER=$10^{-4}$.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.1
• /
• pp.81-91
• /
• 2016

Nowadays, electronic device is in a close relationship with human life. Above all, the use of wireless electronic devices such as smart phone, tablet pc, and wireless keyboard is increasing owing to the high convenience and portability. Furthermore, according to the increasing use of sensitive personal and financial information from the electronic device, various attacks for stealing information are being reported. In this paper we do an analysis of 27MHz wireless keyboard vulnerability and set up an analysis environment. Moreover, we make an experiment and show that there are real vulnerabilities. An experimental result will be used for safety analysis and vulnerability verification of wireless electronic devices.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.7-17
• /
• 2015

In this paper, we propose a single antenna SSD(simultaneous single band duplex) system using turbo equalizer. The proposed system communicates simultaneously on single band. That is the proposed system is full-duplex system. The proposed system uses balanced feed network circuit to improve isolation in single antenna structure. Also, the proposed system uses RF(radio frequency) cancellation and digital cancellation to cancel self-interference. Additionally, the proposed system uses turbo equalizer to equalize ISI(inter-symbol interference) by harsh multipath fading and to collect bit errors by residual self-interference signals. By using turbo equalizer, the proposed system guarantees QoS(quality of service). In this paper, we uses Simulink simulation program to analyze performance of the proposed system. The simulation results confirm that proposed system can communicate simultaneously by using balanced feed network, RF cancellation, digital cancellation and turbo equalizer in harsh multipath channel on single band.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.102-110
• /
• 2012

ZigBee networks developed for low power and short range communication are being used as home network solution for ubiquitous computing. However, as smart phones and tablet PCs have been widely used, WLANs which use same frequency with ZigBee networks have been increasingly used. Therefore, radio frequency interference causes many problems. To solve radio frequency interference problem among ZigBee networks and WLANs, many researches focus on designing interference minimization schemes in ZigBee networks. However, existing schemes have problems that have waste of resource for detecting interference, and have unnecessary time to avoid interference. In this paper, we propose an interference minimization scheme to solve radio frequency interference in ZigBee networks. The proposed scheme detects interference using ACK mechanism to reduce waste of resource, and avoids interference using table driven channel hopping scheme which is faster than existed schemes. The performance of proposed interference minimization scheme is evaluated by using OPNET simulator. Through the simulation result, we prove that proposed scheme has faster channel hopping than existing schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.425-431
• /
• 2015

Beamspace Multiple-Input Multiple Output(MIMO) system can transmit multiple data by using Electronically Steerable Parasitic Array Radiator(ESPAR) antenna which has single Radio Frequency(RF)-chain. Beamspace MIMO system can reduce complexity of the system and size of antenna in comparison with the conventional MIMO system because of characteristic of ESPAR antenna using the single antenna and the RF-chain. Heretofore, only the research of transmitting single-carrier has been conducted by the use of beamspace MIMO system. Therefore, in this paper, we propose beamspace MIMO system based on Orthogonal Frequency Division Multiplexing(OFDM) for transmitting the multi-carrier and analysis the performance of this system. We find a proper reactance value which has good performance because proposed system changes the performance by the reactance values of parasitic elements. and we confirm that performance of the proposed system is similar to conventional MIMO system based on OFDM.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.31-38
• /
• 2008

This paper describes sensor network system implementation for the IEEE 1451.2 standard which guarantees compatibilities between various wired sensors. The proposed system consists of the Network Capable Application Processor(NCAP) in the IEEE 1451.0, the Transducer Independent Interface(TII) in the IEEE 1451.2, the Transducer Electronic Data Sheet(TEDS) and sensors. The research goal of this study is to minimize and optimize system complexity for IC design. The NCAP is implemented using C language in personal computer environment. TII is used in the parallel port between PC and an FPGA application board. Transducer is implemented using Verilog on the FPGA application board. We verified the proposed system architecture based on the standards.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.282-285
• /
• 2005

This paper discusses the interactive system for smart home environments. In order to realize this, the main emphasis of the paper lies on the description of the multiple signal processing on the basis of the technologies such as fingerprint recognition, video signal processing, speech recognition and synthesis. For essential modules of the interactive system, we adopted the motion detector based on the changes of brightness in pixels as well as the fingerprint identification for adapting home environments to the inhabitants. In addition, the real-time speech recognizer based on the HM-Net(Hidden Markov Network) and the speech synthesis were incorporated into the overall system for interaction between user and system. In experimental evaluation, the results showed that the proposed system was easy to use because the system was able to give special services for specific users in smart home environments, even though the performance of the speech recognizer was not better than the simulation results owing to the noisy environments.

• ETRI Journal
• /
• v.40 no.2
• /
• pp.167-179
• /
• 2018

This paper proposes an IEEE 802.15.4m compliant TV white-space orthogonal frequency-division multiplexing (TVWS)-(OFDM) radio frequency (RF) transceiver that can be adopted in advanced metering infrastructures, universal remote controllers, smart factories, consumer electronics, and other areas. The proposed TVWS-OFDM RF transceiver consists of a receiver, a transmitter, a 25% duty-cycle local oscillator generator, and a delta-sigma fractional-N phase-locked loop. In the TV band from 470 MHz to 698 MHz, the highly linear RF transmitter protects the occupied TV signals, and the high-Q filtering RF receiver is tolerable to in-band interferers as strong as -20 dBm at a 3-MHz offset. The proposed TVWS-OFDM RF transceiver is fabricated using a $0.13-{\mu}m$ CMOS process, and consumes 47 mA in the Tx mode and 35 mA in the Rx mode. The fabricated chip shows a Tx average power of 0 dBm with an error-vector-magnitude of < 3%, and a sensitivity level of -103 dBm with a packet-error-rate of < 3%. Using the implemented TVWS-OFDM modules, a public demonstration of electricity metering was successfully carried out.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.9
• /
• pp.602-608
• /
• 2017

Due to recent industry 4.0, manufacturing has changed a lot. In particular, it is necessary to control the controller and controller of the control system, to communicate various production information and measurement information, and to produce a database in accordance with the flexible production for a small quantity of various items, and to manage the trend of major parts of production facilities. In this paper, we developed a multiple wireless communication controller for small scale control system for smart factory by applying XBee and microcomputer. This controller is cheap and easy to build multi-radio communication environment of 1: N and can control and monitor control system. In addition, we tested multiple wireless communication controllers by using signal processing device and C++, and constructed network, control, and database for mechanism module, and confirmed effectiveness for industrial application.