• Biomaterials and Biomechanics in Bioengineering
• /
• 제1권2호
• /
• pp.105-116
• /
• 2014

Synthesis of interpenetrating polymer network (IPN) of chitosan-gelatin (Cs-Ge) (as a primary network) and N-isopropylacrylamide (NIPAAm) monomer (as the secondary network) was carried out with different ratio. Its structure was characterized by FT-IR, which indicated that the IPN was formed. The memberanes were studied by swelling, weight loss with time. The interior morphology of the IPN hydrogels was revealed by scanning electron microscopy (SEM); the IPN hydrogels showed a interpenetrated network of NIPAAm/chitosan has layers with more minute stoma and canals compared to interpenetrated network of NIPAAm/gelatin. Lower critical solution temperature (LCST), equilibrium swelling ratio (ESR) and deswelling kinetics were measured. The DSC results noticed that LCST of IPN hydrogels with different ratio of Cs/Ge/PNIPAAm are around $33{\pm}2^{\circ}C$. The ESR obtained results showed that with a ratio of Cs/Ge/NIPAAm: 1/1/6, the swelling ratio increased drastically from room temperature to $36^{\circ}C$ but with a ratio of Cs/Ge/PNIPAAm: 1/3/6, decrease significantly at the same condition. Therefore the hydrogels have been changed from a hydrophilic structure to a hydrophobic structure. Furthermore with an increase in temperature from room to the LCST, the ESR of IPN with higher concentration of (PNIPAAm) and (Ge) decreases but de-swelling kinetics of them are faster. Due to the suitable and different kinetics of de-swelling and the equilibrium swelling ratio (ESR) in various proportions, and because of the morphology inside the mass which confirms other tests, these hydrogels are very appropriate as a smart thermosensitive hydrogels with rapid response.

• 농업과학연구
• /
• 제47권4호
• /
• pp.1123-1134
• /
• 2020

The goal of this study was to develop an accelerated life test for an implement working pump for an agricultural tractor. The field experiments were conducted to measure the load of an implement working pump during major agricultural operations such as plow tillage, rotary tillage, baler operations, and wrapping operations. The measurement system for an implement working pump load was constructed using a pressure sensor, the engine rotational speed, and the hitch pump displacement. The measured implement working pump load was calculated as an equivalent load for each agricultural operation using the Palmgren-Miner rule, which is a cumulative damage method. The equivalent load was calculated using the total load data and peak load data when the total data included the operation of an implement working. The annual usage time of the agricultural tractor was applied to develop two integrated equivalent loads. The acceleration factor was calculated to develop an accelerated life test and was calculated from the two integrated equivalent loads, the maximum pressure, and the flow rate conditions of the hitch pump. In Korea, the warranty life of a tractor is 2,736 hours, and the time required for the test to guarantee the operational life of tractors was calculated as 7,561 hours. The acceleration factors were calculated as 453.6 and 38.3, respectively, from the total load data and peak load data. The fatigue test time can be shortened by 16.7 and 197.4 hours according to the result of the acceleration factors.

• 한국환경농학회지
• /
• 제41권2호
• /
• pp.101-107
• /
• 2022

BACKGROUND: Soil amendment was necessary applied for the sand that had been used to root zone of green ground in golf course because of its low water retention power and cation exchangeable capacity. This study was conducted to evaluate the effect of the mixed ratio of peat moss and coconut coir as soil amendment materials on the soil physicochemical properties applied to rootzone based on sand. METHODS AND RESULTS: The soil amendments were blended at 0, 3, 5, 7 and 10% by soil volume. The pH in the peat moss treatment was lower than that of control (0% soil amendment), and pH and electrical conductivity (EC) in the coconut coir were higher. The blending ratio of peat moss was negatively correlated with pH of rootzone soil (p<0.01), and that of coconut coir positively with EC (p<0.01). As compared with control, capillary porosity, the physical factors such as air-filled porosity, total porosity, and hydraulic conductivity of rootzone soil were increased by applying peat moss and coconut coir. For correlation coefficients between percentage of soil amendments and soil physical factors, peat moss and coconut coir were positively correlated with porosity and hydraulic conductivity (p<0.01). CONCLUSION(S): These results indicated that the application of peat moss and coconut coir affected on the change of physicochemical properties of rootzone soil, and improved soil porosity and hydraulic conductivity.

• Smart Structures and Systems
• /
• 제30권5호
• /
• pp.545-556
• /
• 2022

Through the examination of literatures, electronic commerce is a subject which is accepted in enterprises to define e-commerce adoption, trends, and issues that are assisting and obstructing its efficacy. E-commerce offers numerous advantages to consumer satisfaction in any place and helps the company to get a competitive benefit over its competitors. The Internet has expanded the scope of business. Many business information is available by the global network that supports information gathering between organizations, businesses and their clients, while various divisions of a business is increasing at an exponential rate. Meanwhile, there are a few barriers to proper e-commerce usage and adoption, such as reliable internet connections, poor e-commerce supporting infrastructures, logistics systems presenting socio-regulatory and poor transportation barriers and demonstrating the significant improvement of e-commerce reliable and affordable Internet provisions, i.e., Internet cost, intensity, and reasonable level of e-readiness. The operational and strategic significance of information-based virtual value chains for all organizations cannot be emphasized. As a consequence, this study confirms worldwide market elements of e-commerce, such as its issues, benefits, relevance, scope, facilitators and projects prospective obstacles in a developing economy.

• 구강회복응용과학지
• /
• 제23권2호
• /
• pp.157-170
• /
• 2007

Purpose: This investigation was designed to determine the translucency and color stability of various core ceramics for all-ceramic restoration using the CIE $L^*a^*b^*$ system. Material and Methods: IPS e.max Press ceramic(Ivoclar-Vivadent, Liechtenstein), $LAVA^{TM}$ All Ceramic(3M-Espe, Germany), Cercon Smart Ceramic(Dentsply, Germany), and Z-match Ceramic(DentAim, Korea) were used for this study. For the specimens of zirconia oxide ceramics, the as-sintered cylindrical blanks($11.0{\times}25.0mm$) were machined into the shape of a disk(0.4, 0.8, 1.5 mm in thickness, 10 mm in diameters) with a diamond grind machine. The IPS e.max Press specimens ($0.8{\times}10mm$) were fabricated using the "lost wax" technique. CIE $L^*a^*b^*$ coordinates and light transmission were recorded for each specimen with a spectrophotometer(CM-2600d, Minolta, Japan). Color differences were calculated using the equation, ${\Delta}E^*ab=[({\Delta}L^*)2+({\Delta}a^*)2+({\Delta}b^*)2]1/2$. Results: The results were obtained as follows: 1. The most translucent group was IPS e.max Press ceramic that is a glass-ceramic, and $Lava^{TM}$ and Z-match ceramic were more translucent than Cercon Smart ceramic in zirconia ceramic group. 2. In the all groups, there was no significant translucent change after 6 times heat-treatments required to make a final restoration. 3. Colored zirconia was showed more yellowish and dark than uncolored zirconia. 4. After heat-pressing, IPS e.max Press ceramic was showed high ${\Delta}E^*ab$ value(4.1 of eM1, 6.8 of eM2) that means to be more whiter than before heat-pressing. However, there was no color change after additive heat treatments for final restoration. 5. In the colored zirconia groups, there was no significant color change after some heat-treatments required to make a final restoration.

• 디지털융복합연구
• /
• 제17권9호
• /
• pp.185-192
• /
• 2019

스마트 기술의 도입은 의사와 환자 모두에게 정확성, 안전성, 효율성을 제공한다. 투명 교정장치에 대한 관심은 국내외에서 점점 높아지고 있지만, 현재 투명교정 장치로 치열교정을 할 경우, 환자는 1, 2주에 한 번씩 병원을 방문하여 교체하여야 하며, 약 40~80개 정도의 장치가 제작되고 교정장치의 착용 순서 및 기간 등을 고려해서 교정이 이루어지기 때문에 치과 의사와 환자는 매우 번거롭고 혼란스럽다. 또한 이 과정에서 치과 의사와 환자 간 정확한 의사소통이 필요하다. 따라서 본 연구는 투명 교정장치에 QR 코드를 삽입하여 환자와 의료진 간의 커뮤니케이션이 보다 원활하게 이루어질 수 있도록 투명 교정장치 관리 시스템을 설계 및 개발하였다. 개발 결과 QR 코드의 크기는 구강 내에서 사용 가능한 $6{\ast}6mm^2$ 이상이면 100% 인식하였고, 인식 거리는 12cm 이내에서 100% 인식률을 보였다. 제안한 시스템으로 치과의사는 환자를 원격으로 관리하며 교정효과를 높여 주기 때문에 국내의 환자는 물론 해외의 환자 관리가 가능하다.