• Journal of the Korean Data and Information Science Society
• /
• 제21권6호
• /
• pp.1203-1209
• /
• 2010

한국정보화진흥원에서는 2002년 개발한 한국형 인터넷 중독 진단척도를 사용하여 인터넷 중독 실태를 매년 발표하고 예방을 위해 노력하고 있다. 그러나 인터넷사용이 급증함에 따라 정보화의 역기능도 증가하고 있으며 특히 인터넷 중독의 폐해가 우려되고 있는 실정이다. 본 연구에서는 인터넷 중독 자가진단 소형척도를 제안하고자한다. 대학생들을 대상으로 킴벌리영척도와 한국형진단척도를 적용하여 인터넷 중독을 진단한 자료를 분석한다. 두 척도의 신뢰성과 타당성을 검토한 결과 한국형진단척도에서 요인타당도가 있음으로, 이를 이용하여 소형척도를 개발한다. 요인타당도의 요인적재값과 변수선택법을 이용하여 선택한 소형척도들을 비교 분석한다. 분할표와 감마 연관성측도를 이용하여 소형척도와 기존의 척도들과의 일치성을 비교하고, 소형척도들의 신뢰성과 타당성을 조사한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.177-180
• /
• 2005

The specified tensile strength provided by the manufacturer is determined on the basis of the reliable lower limit ($X-3{\sigma}$ : X=average tensile strength, $\sigma$=standard deviation) obtained from the material test results. Most of these data, however, are based on the test results of 1 layer of FRP sheet. Also, the partial strength reduction factor for strengthening RC members with FRP is based on the small-scale model tests. But, the failure mechanisms of small-scale model tests are reported to be different from those of the full-scale tests. This paper present the test results of full-scale RC beams strengthened with multi-layer GFRP sheets up to 3 layer as well as the material tests. From the material tests, it was observed that the average tensile strengths of GFRP sheets are decreased as the number of layer are increased. Also the premature debonding failure of RC beams strengthened with multi-layer GFRP sheets are observed in inverse proportion to the number of GFRP sheets

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.301-305
• /
• 2007

The performance of the railway bogie is classified into the stability and the steering performance. Testing for the bogie stability is conducted on the roller rig. But testing for the bogie steering performance on test facility is very difficult, so the testing for the vehicle curving performance is conducted on the real curve track. And it is desirable to test on the full scale test rig, but it caused many problems relating to test costs, test time. To overcome these problems, the small scale test rig is actively used in the field of bogie stability. Thus, in this paper, we have studied the scale track to test the bogie steering performance. For this, we designed the 1/5 scale test track equivalent to radius 200 curve and confirmed the validity of the testing for the bogie steering performance on the scale curve track through the testing using 1/5 scale bogie.

• 한국추진공학회지
• /
• 제19권3호
• /
• pp.73-82
• /
• 2015

본 연구에서는 소형 액체로켓엔진을 사용하여, 약 25 km(0.025 bar) 고도의 대기압 환경을 조성할 수 있는 초음속 디퓨저와 이젝터 조합의 고공시험 설비를 구축하였으며, 설비의 성능 검증 차원에서 소형 액체로켓엔진 고공환경 모사시험을 수행하였다. 시험 설비는 고공환경 모사장치와 추진제 공급설비 그리고 냉각수 공급설비로 구성된다. 본 고공시험 설비로 약 27 km(0.021 bar) 고도에 해당하는 대기 압력을 성공적으로 구현하였으며, 이때 소형 액체로켓엔진에서 발생하는 추력 성능을 확인하였다.

• 한국융합학회논문지
• /
• 제4권3호
• /
• pp.1-5
• /
• 2013

본 연구에서는 소형풍력발전용 블레이드의 축소모델을 대상으로 단순 하중 계산 및 구조 시험을 수행하였다. 먼저, 연구 대상인 블레이드의 초기 모델의 0.2 비율만큼 축소하여 설계 및 제작하였다. 그리고 소형 풍력발전 국제 규격인 IEC 61400-2에 의거한 단순 하중 계산식을 이용하여 모멘트를 획득하였다. 또한, 추를 이용한 구조시험을 수행하여 최대 모멘트를 획득하였다. 이를 통하여 계산 및 시험에 따른 최대 모멘트를 비교하였다.

• 한국압력기기공학회 논문집
• /
• 제8권1호
• /
• pp.1-7
• /
• 2012

A PHE (Process Heat Exchanger) is a key component required to transfer heat energy of $950^{\circ}C$ generated in a VHTR (Very High Temperature Reactor) to the chemical reaction that yields a large quantity of hydrogen. A small-scale PHE prototype made of Hastelloy-X is being tested in a small-scale gas loop at Korea Atomic Energy Research Institute. In order to properly evaluate the high-temperature structural integrity of the small-scale PHE prototype, it is very important to impose a proper constraint condition on its structural analysis model. For this effort, we tried to impose several constraint conditions on the structural analysis model and consequently fixed a proper and effective displacement constraints.

• 한국압력기기공학회 논문집
• /
• 제7권3호
• /
• pp.48-53
• /
• 2011

A PHE (Process Heat Exchanger) is a key component required to transfer heat energy of $950^{\circ}C$ generated in a VHTR (Very High Temperature Reactor) to the chemical reaction that yields a large quantity of hydrogen. A small-scale PHE prototype made of Hastelloy-X is being tested in a small-scale gas loop at Korea Atomic Energy Research Institute. In this study, as a part of the evaluation on the high-temperature structural integrity of the small-scale PHE prototype, we carried out macroscopic high-temperature structural analysis of the small-scale PHE prototype under the gas loop test conditions considering the pipeline stiffness.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.545-552
• /
• 2006

Small-scale models have been frequently used for seismic performance tests because of limited testing facilities and economic reasons. However, there are not also enough studies on similitude law for analogizing prototype structures accurately with small-scale models, although conventional similitude law based on geometry similitude is not well consistent in their inelastic seismic behaviors. When fabricating prototype and small-scale model of reinforced concrete structures by using the same material, added mass is demanded from a volumetric change and scale factor could be limited due to aggregate size. Therefore, it is desirable to use different materials for small-scale model. In our recent study, a modified similitude law was derived depending on geometric scale factor, equivalent modulus ratio and ultimate strain ratio. And quasi-static and pseudo-dynamic tests on the specimens are carried out using constant and variable modulus ratios, and correlation between prototype and small-scale model is investigated based on their test results. In this study, tests on scaled model of different concrete compressive strength aye carried out. In shaking table tests, added mass can not be varied. Thus, constant added mass on expected maximum displacement was applied and the validity was verified in shaking table tests. And shaking table tests on non-artificial mass model is carried out to settle a limitation of acceleration and the validity was verified in shanking table tests.

• Journal of Electrical Engineering and Technology
• /
• 제6권3호
• /
• pp.311-318
• /
• 2011

Small-scale reactors have recently attracted attention as a potential power generation source for the future. The Regional Energy Research Institute for Next Generation is currently developing a small-scale reactor called Regional Energy rX 10 MVA (REX-10). The current paper deals with a power system to be used with small-scale reactors for multi-purpose regional energy systems. This small nuclear system can supply electric and thermal energy like a co-generation system. The electrical model of the REX-10 has been developed as a part of the SCADA system. REX-10's dynamic and electromagnetic performance on the power system is analyzed. Simulations are carried out on a test system based on Ulleung Island's power system to validate REX-10 availability on a power system. RSCAD/RTDS and PSS/E software tools are used for the simulation.

• 대한기계학회논문집B
• /
• 제20권1호
• /
• pp.237-243
• /
• 1996

Current low head and small scale hydroturbines have limitations in the minimum required head and flow rate for efficient operation. This study attempts to develop a new concept hydroturbine which is expected to run efficiently even in very low head and small flow rate, so that the limitations on the conventional small scale hydropower could be alleviated and competition with other alternative energy sources in the economic respect could be attained. A small scale catapillar track- hydroturbine was fabricated and the performance test was carried out in a water tunnel over the head range of H = 0.8 m ~ 1.26 m. The peak turbine efficiency was 41.3% at the speed ratio of 0.6, and the turbine loss was mostly due to the friction at the chain drive used for power transmission from the runner to the shafts. This type of turbine is expected to become competitive when some improvement in the power transmission mechanism is made.