• Spatial Information Research
• /
• v.3 no.2
• /
• pp.179-189
• /
• 1995

To make vector data from a map which has no negative plates by using vectoring tool, it is necessary that we can extract objects to be vectorized from a scanned map. In this paper, we studied on extracting vectoring objects from scanned color maps. To do this, we classified vectoring objects into three types : line type, filled - area type and character/symbol type. To make the extraction method effective, we analyzed characteristics of vectoring objects and color distribution in scanned color maps. Then, we applied these characteristics to designing process of the extraction method. To extract the line type object, our line tracing method was designed by using the masks which considered connectivity and geometrical characteristics of lines. By using the local thresholding method and the similarity function for comparing the color distribution between two NxN blocks, we extracted character/symbol and the filled-area objects effectively. The method proposed in this paper can be used for constructing the small scale GIS application economically using existing color maps.

• Structural Monitoring and Maintenance
• /
• v.1 no.1
• /
• pp.131-157
• /
• 2014

Special track systems used to divert a train to other directions or other tracks are generally called 'railway turnout'. A traditional turnout system consists of steel rails, switches, crossings, steel plates, fasteners, screw spikes, timber bearers, ballast and formation. The wheel rail contact over the crossing transfer zone has a dip-like shape and can often cause detrimental impact loads on the railway track and its components. The large impact also emits disturbing noises (either impact or ground-borne noise) to railway neighbors. In a brown-field railway track where an existing aged infrastructure requires renewal or maintenance, some physical constraints and construction complexities may dominate the choice of track forms or certain components. With the difficulty to seek for high-quality timbers with dimensional stability, a methodology to replace aged timber bearers in harsh dynamic environments is to adopt an alternative material that could mimic responses and characteristics of timber in both static and dynamic loading conditions. A critical review has suggested an application of an alternative material called fibre-reinforced foamed urethane (FFU). The full-scale capacity design makes use of its comparable engineering characteristics to timber, high-impact attenuation, high damping property, and a longer service life. A field trial to investigate in-situ behaviours of a turnout grillage system using an alternative material, 'fibre-reinforced foamed urethane (FFU)' bearers, has been carried out at a complex turnout junction under heavy mixed traffics at Hornsby, New South Wales, Australia. The turnout junction was renewed using the FFU bearers altogether with new special track components. Influences of the FFU bearers on track geometry (recorded by track inspection vehicle 'AK Car'), track settlement (based on survey data), track dynamics, and acoustic characteristics have been measured. Operational train pass-by measurements have been analysed to evaluate the effectiveness of the replacement methodology. Comparative studies show that the use of FFU bearers generates higher rail and sleeper accelerations but the damping capacity of the FFU help suppress vibration transferring onto other track components. The survey data analysis suggests a small vertical settlement and negligible lateral movement of the turnout system. The static and dynamic behaviours of FFU bearers appear to equate that of natural timber but its service life is superior.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.1-11
• /
• 2017

In this study, 1/6 small-scale model tests of helical piles were conducted to evaluate their installation time and ultimate capacities. Model sand layers were constructed using sand pluviating method to produce uniform soil relative density. For installation of different helical piles varying locations (vertical center-to-center spacings of 50 mm and 150 mm) of helix plates, two different rotation speeds of 15 rpm and 30 rpm were implemented. Cone penetration equipment was installed within the hallow section of the helical pile to increase ultimate capacity of helical pile and to evaluate soil properties of plugged soils and soils below pile tip after installation of the piles. Based on the test results, the most fasted installation was possible under the condition of "rotation speed of 30 rpm and center-to-center spacing of 50 mm", and the highest ultimate capacity was mobilized under the condition of "rotation speed of 30 rpm and center-to-center spacing of 150 mm with cone penetration implementation."

• Advances in nano research
• /
• v.7 no.3
• /
• pp.191-208
• /
• 2019

In the present work the dynamic analysis of the functionally graded rectangular nanoplates is studied. The theory of nonlocal elasticity based on the quasi 3D high shear deformation theory (quasi 3D HSDT) has been employed to determine the natural frequencies of the nanosize FG plate. In HSDT a cubic function is employed in terms of thickness coordinate to introduce the influence of transverse shear deformation and stretching thickness. The theory of nonlocal elasticity is utilized to examine the impact of the small scale on the natural frequency of the FG rectangular nanoplate. The equations of motion are deduced by implementing Hamilton's principle. To demonstrate the accuracy of the proposed method, the calculated results in specific cases are compared and examined with available results in the literature and a good agreement is observed. Finally, the influence of the various parameters such as the nonlocal coefficient, the material indexes, the aspect ratio, and the thickness to length ratio on the dynamic properties of the FG nanoplates is illustrated and discussed in detail.

• Journal of Distribution Science
• /
• v.13 no.10
• /
• pp.115-122
• /
• 2015

Purpose - This study was conducted to develop a beekeeping farm management standard checklist. This is essential to increase the competitive power of beekeeping farmers. Checklists in relation to crops and livestock were established by the Rural Development Administration in the 2000s. To date, 60 checklists have been created by crop and livestock experts. However, other farmers outside the 60 checklists are increasing. Therefore, extra development is required for these farmers. This study was conducted to meet farmers' requirements. The special farming dealt with in this study is beekeeping. Such checklists were not developed due to the small number of beekeeping farmers. However, these days, a number of such farmers are emerging. Research design, data, and methodology - Many related experts participated in this study. This study was conducted in four stages. First, a basic outline of beekeeping was created by surveying many kinds of beekeeping experts. The draft of the beekeeping checklist was created by a secondary advisory council. This draft was then sent to 14 beekeeping experts to confirm whether or not it was suitable as a management checklist. For collecting the experts' opinions, a direct visit survey was done through an arranged questionnaire. Additionally, a basic management checklist blueprint was reviewed by many experts. In the third stage, a Delphi survey method was utilized with a special Delphi questionnaire. In this stage, experts who participated in the first and second stages were excluded. As there were uncertain answers among them, a second Delphi survey was done. As a result of this survey, all answers were agreed among them. Results - From the results of this survey, four subjects in the management accomplishment index were determined. These are farming scale, average product per beehive, the sale price of honey (1kg), and the number of bee plates in the beehive. In the case of the management checklist content, five items were determined. These are beekeeping farming facilities, the environment around the farm land and general management, the product management of the beekeeping harvest, the management of the disease and pest, and farming management. This checklist will be utilized for beekeeping farmers to implement in a management situation. Conclusions - These days, the number of beekeeping farmers is increasing. The management checklist for beekeeping farmers will be used to improve their farming situation and marketing. Beekeeping farmers can understand their management by reviewing their checklist. After checking, the situation of management can be analyzed. Farmers can supplement weaknesses with expert advice. This checklist will be used by agricultural technique extension workers for farming management consulting. This checklist has to be complemented by a change in the management of the environment. This checklist will be delivered to beekeeping farmers after a verification survey is done. The result of the checklist score will be utilized for a benchmarking service to be implemented for beekeeping farmers to utilize.