• Journal of Space Technology and Applications
• /
• v.2 no.1
• /
• pp.41-51
• /
• 2022

CubeSat is a satellite platform that is widely used not only for earth observation but also for space exploration. CubeSat is also used in magnetic field investigation missions to observe space physics phenomena with various shape configurations of magnetometer instrument unit. In case of magnetic field measurement, the magnetometer instrument should be far away from the satellite body to minimize the magnetic disturbances from satellites. But the accommodation setting of the magnetometer instrument is limited due to the volume constraint of small satellites like a CubeSat. In this paper, we investigated that the magnetic field interference generated by the cube satellite was analyzed how much it can affect the reliability of magnetic field measurement. For this analysis, we used a reaction wheel and Torque rods which have relatively high-power consumption as major noise sources. The magnetic dipole moment of these parts was derived by the data sheet of the manufacturer. We have been confirmed that the effect of the residual moment of the magnetic torque located in the middle of the 3U cube satellite can reach 36,000 nT from the outermost end of the body of the CubeSat in a space without an external magnetic field. In the case of accurate magnetic field measurements of less than 1 nT, we found that the magnetometer should be at least 0.6 m away from the CubeSat body. We expect that this analysis method will be an important role of a magnetic cleanliness analysis when designing a CubeSat to carry out a magnetic field measurement.

• Journal of Korean Society of Forest Science
• /
• v.111 no.3
• /
• pp.345-356
• /
• 2022

Yokjido is a 15-km² inhabited island located at the tip of the southeastern coast of the Korean Peninsula. Its forest is mostly composed of substitutional vegetation. Our aim was to provide basic information necessary for the conservation and management of the forest vegetation in Yokjido. We classified the types of existing vegetation using methods of the Zurich-Montpellier school of phytosociology. The resulting vegetation map shows the dominant tree species in the top canopy-layer. A total of 8 vegetation types were identified, which were arranged into a vegetation unit hierarchy of 2 communities, 4 sub-communities, 6 variants, and 2 subvariants. Evaluations of each type showed large and small differences in floristic composition, which reflect anthropogenic influences, site conditions, succession stages, and the establishment period. Moreover, vegetation types differed significantly in terms of species diversity indices; in particular, overall species richness, species diversity, and species evenness tended to increase significantly as the elevation increased. The herbaceous plant species showed the highest positive (+) correlation to x. These results were consistent with those of McCain, who reported that species diversity increases in mountainous areas with relatively low elevations due to the mid-domain effect. The forest succession in Yokjido will potentially enter a mixed-forest stage and then proceed to become an all-evergreen broad-leaved forest.

• Journal of the Korea Computer Graphics Society
• /
• v.28 no.2
• /
• pp.1-9
• /
• 2022

In this paper, we propose a vector-based augmentation technique that can generate data required for crack detection and a ConvNet(Convolutional Neural Network) technique that can learn it. Detecting cracks quickly and accurately is an important technology to prevent building collapse and fall accidents in advance. In order to solve this problem with artificial intelligence, it is essential to obtain a large amount of data, but it is difficult to obtain a large amount of crack data because the situation for obtaining an actual crack image is mostly dangerous. This problem of database construction can be alleviated with elastic distortion, which increases the amount of data by applying deformation to a specific artificial part. In this paper, the improved crack pattern results are modeled using ConvNet. Rather than elastic distortion, our method can obtain results similar to the actual crack pattern. By designing the crack data augmentation based on a vector, rather than the pixel unit used in general data augmentation, excellent results can be obtained in terms of the amount of crack change. As a result, in this paper, even though a small number of crack data were used as input, a crack database can be efficiently constructed by generating various crack directions and patterns.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.5
• /
• pp.59-67
• /
• 2006

The centrifuge and 1-g shaking table tests were performed simultaneously to compare the dynamic behaviors of loose sands of the same geotechnical properties. The prototype soils were 10 m thick liquefiable loose sands. The geometric scaling factors were 20 for 1-g and 40 for centrifuge tests. The excess pore pressure, surface settlement, and acceleration in the soil were measured at the same locations in the 1-g and centrifuge tests. The total excess pore pressure from development to dissipation was measured. In the centrifuge test, viscous fluid was used as the pore water to eliminate the time scaling difference between dynamic time and dissipation time. In the 1-g tests, the steady state concept was applied to determine the unit weight of the model soil, and two different time scaling factors were applied for the dynamic time and the dissipation time. It is concluded that the 1-g tests can simulate the excess pore pressure of the prototype soil if the permeability of the model soil is small enough to prevent dissipation of excess pore pressure during shaking and the dissipation time scaling factor is properly determined.

• Journal of the Korean Society of Floral Art and Design
• /
• no.41
• /
• pp.133-153
• /
• 2019

This study is about the development and creation of the public installation to enhance the contact chances with plants for the city dwellers who are living in the environment of limited green space. The researcher tried to create a floral art work at an island type bus stop on the central bus only lane, where the passers-by can enjoy the contact with plants for a second on that crowded space. The researcher made the study of various related cased world-widely and existing island type bus stop on the central bus only lane. The researcher also made pre-creation study of applicable forms and elements, and developed the prototype of the installation on the base of that study. Therefore the researcher created 1 installable screen type floral art work offering abundant contact experience to the viewers which has multiple shelves in the vertical frame to fit and be substituted by the designated wall unit of the island type bus stop structure. Also the researcher developed the prototypes of 2 small interior pieces. The meaning of this study can be found in the contribution of increasing visual experiencing rate of green space and chances of experiencing plants to create positive psychological, emotional effects by developing floral art works to be installed at crowded urban public space.

• Health Policy and Management
• /
• v.32 no.4
• /
• pp.347-355
• /
• 2022

Background: Since November 2019, long-term care hospitals have been able to provide patients with discharging programs to support the elderly in the community. This study aimed to identify both patient- and hospital-level factors that affect successful community discharge from long-term care hospitals. Methods: A multilevel logistic regression model was performed using hospitals as a clustering unit. The dependent variable was whether a patient stayed in the community for at least 30 days after discharge from a long-term care hospital. As for the patient-level independent variables, an agreement between a patient and the family about discharge, length of hospital stay, patient category, and residence at discharge were included. The number of beds and the ratio of long-stay patients were selected for the hospital-level factors. The sample size was 1,428 patients enrolled in the discharging program from November 2019 to December 2020. Results: The number of patients who were discharged to the community and stayed at least for 30 days was 532 (37.3%). The intraclass correlation coefficient was 22.9%, indicating that hospital-level factors had a significant impact on successful community discharge. The odds ratio (OR) of successful community discharge increased by 1.842 times when the patients and their families agreed on discharge. The ORs also increased by 3.020 or 2.681 times, respectively when the patients planned to discharge to their own house or their child's house compared to those who didn't have a plan for residence at discharge. The ORs increased by 1.922 or 2.250 times when the hospitals were owned by corporate or private property compared to publicly owned hospitals. The ORs decreased by 0.602 or 0.520 times when the hospital was sized over 400 beds or located in small and medium-sized cities compared to less than 200 bedded hospitals or located in metropolitan cities. Conclusion: The results of the study showed that the patients' and their family's willingness for discharge had a great impact on successful community discharge and the hospital-level factors played a significant role in it. Therefore, it is important to acknowledge and support long-term care hospitals to involve active in the patient discharge planning process.

• The Journal of KAIRB
• /
• v.2 no.1
• /
• pp.6-22
• /
• 2020

Purpose: Clinical studies require institutional review board (IRB) approval based on the ethical principle and regulations. While the number of clinical studies has been increased and diversified, duplicated IRB review for multi-center studies has become a major issue. Therefore, single IRB system has been suggested in revised Common Rule. This study aimed to identify and assess the current status of single IRB in Korea and the anticipated needs of single IRB from researchers and IRB member or administrators. Methods: We developed 14 questions including perceived advantages and disadvantages of single IRB, and anticipated problems. The online survey collected opinions on single IRB from researchers, IRB members and IRB administrators. We also interviewed five IRB administrators who have an experience of single IRB. Results: A total of 80 responses were analyzed in this study. Although efficiencies were suggested for the advantages of single IRB in terms of reducing burden of duplicated review, respondents also perceived that the different review criteria between single IRB and each IRB would be a major hurdle for adopting single IRB system. Therefore, the standardization of standard of procedures (SOP) and the standardization of IRB submission materials should be preceded. According to the small group experiences of single IRB in Korea, we also observed the similar anticipated problems of single IRB. Conclusion: Single IRB system has many advantages for conducting multi-center trial. However, many specialists still have a lot of concerns about introducing a single IRB system in Korea. Therefore, a gradual, step-by-step process for conducting a single IRB system in Korea will be needed. Many studies for improving currently suggested single IRB system and the improvement of awareness about the essential of single IRB system would be needed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5B
• /
• pp.529-537
• /
• 2006

This paper investigates the impacts of the drag-related weighting coefficients on mean velocity and turbulence structures. The transport equations for the Reynolds stress of vegetated open-channel flows are derived by using the temporal- and horizontal-averaging scheme. It is found that the total Reynolds stress of vegetated open channel flows consists of the Reynolds stress due to temporally fluctuating velocities and the Reynolds stress due to spatially fluctuating velocities. The drag-related weighting coefficient $C_{fk}$ for the total Reynolds stress component is found to be unit, while the coefficient for the Reynolds stress due to temporally fluctuating velocities can be negligible. This is the reason why very small weighting coefficients in previous studies yield very good agreements with measured data. In other words, the Reynolds stress due to spatially fluctuating velocities remains still unknown, especially due to the large number of measuring locations. Through a developed Reynolds stress model, vegetated open-channel flows are simulated and compared with measured data from the literature. Comparisons reveal that the computed mean flow and Reynolds stress structures are hardly affected by the drag-related weighting coefficients. However, the computed turbulence intensity profiles are significant different with the drag-related weighting coefficients. A budget analysis of the transport equations for the Reynolds stress component is carried to investigate why turbulence intensity is affected by the drag-related weighting coefficients.

• Progress in Medical Physics
• /
• v.34 no.4
• /
• pp.41-47
• /
• 2023

Purpose: This study aimed to dosimetrically compare the technique of three-dimensional conformal radiotherapy (3D CRT), which is a traditional prophylactic cranial irradiation method, and the intensity-modulated radiotherapy (IMRT) and volumetric modulated arc therapy (VMAT) techniques used in the last few decades with the dynamic conformal arc therapy (DCAT) technique. Methods: The 3D CRT, VMAT, IMRT, and DCAT plans were prepared with 25 Gy in 10 fractions in a Monaco planning system. The target volume and the critical organ doses were compared. A comparison of the body V₂, V₅, and V₁₀ doses, monitor unit (MU), and beam on-time values was also performed. Results: In planned target volume of the brain (PTV_Brain), the highest D99 dose value (P<0.001) and the most homogeneous (P=0.049) dose distribution according to the heterogeneity index were obtained using the VMAT technique. In contrast, the lowest values were obtained using the 3D CRT technique in the body V₂, V₅, and V₁₀ doses. The MU values were the lowest when DCAT (P=0.001) was used. These values were 0.34% (P=0.256) lower with the 3D CRT technique, 66% (P=0.001) lower with IMRT, and 72% (P=0.001) lower with VMAT. The beam on-time values were the lowest with the 3D CRT planning (P<0.001), 3.8% (P=0.008) lower than DCAT, 65% (P=0.001) lower than VMAT planning, and 76% (P=0.001) lower than IMRT planning. Conclusions: Without sacrificing the homogeneous dose distribution and the critical organ doses in IMRTs, three to four times less treatment time, less low-dose volume, less leakage radiation, and less radiation scattering could be achieved when the DCAT technique is used similar to conventional methods. In short, DCAT, which is applicable in small target volumes, can also be successfully planned in large target volumes, such as the whole-brain.

• Journal of Korean Society of Forest Science
• /
• v.106 no.4
• /
• pp.487-496
• /
• 2017

The marketization in North Korea is spreading rapidly. This study proposes forest rehabilitation strategy for North Korea in light of their major shift toward market economy. This current trend of marketization in North Korea is now affecting the forest sector, especially the way the residents utilize small forest land. For analyzing the influence of marketization on forest management in North Korea, we reviewed the official documents issued by North Korea and related materials of North Korean marketization. The government of Kim Jong Eun has set up policies and systems regarding the spread of marketization, such as guaranteeing individuals a right to dispose certain products on their own and establishing a special economic zone to attract foreign investments. In the forestry sector, the North Korean government has been trying to fully implement its forest restoration plan by carrying out measures like re-claiming of sloping lands that had been previously used by residents. However, as marketization progresses, it is expected that there lies much difficulty in government-led massive mobilization for forest restoration due to the increase of illegal logging to meet high demand for timber, illegal firewood harvesting, collecting non-timber products for livelihoods and illegal crop cultivation to sell in the market. Therefore, South Korea's support for forest restoration should also consider the recent marketization phenomenon in North Korea. It is necessary to formulate strategic measures such as conducting joint commercialization project on agroforestry management using cooperative farming unit, helping to improve income source from small forest lands, and to activate a comprehensive mountain village special economic zone by utilizing forest business. We do hope that our proposed forest rehabilitation strategy in this paper regarding the changes in North Korea's marketization and forest policy can give a meaningful suggestion on supporting forest restoration in North Korea in an effective way.