• The korean journal of orthodontics
• /
• v.20 no.2
• /
• pp.267-280
• /
• 1990

The purpose of this study was to investigate the force mechanism of Multiloop Edgewise Arch Wire and the intensity and distribution of stresses with vertical and intermaxillary elastics. The obtained results were as follows. 1. When plain wires were inserted and vertical and intermaxillary elastics were used in the upper and lower arch, the stresses of the anterior and posterior ends of wires were observed greatly but the stresses of the premolar were very small. 2. When MEAW were inserted in upper and lower arch, the upper 1st and 2nd premolar and the lower 1st premolar were extruded greatly. 3. In the area of the upper 1st molar and the lower 2nd premolar and the lower 1st molar, any stresses were not observed. 4. The vertical elastic counteracted the intrusion force of the MEAW in the anterior teeth but could not affect on posterior teeth. Using with the Class II elastics, the distal tipping force and extrusion force were exerted in the upper anterior teeth and the intrusion forces of the lower anterior teeth were relieved. Using with the Class III elastics, the extrusion force were exerted in the upper and lower anterior teeth, the distal tipping force were increased in the lower posterior teeth. 5. The Class II elastic counteracted the anterior intrusion force of the MEAW and extruded and tipped mesially the lower 2nd molar. The intrusion force of the MEAW also could not overcome the extrusion force of the class II elastics. 6. When the Class III elastics were engaged, the upper 2nd molar was extruded in spite of the intrusion forces of the MEAW and the extrusion forces of the lower anterior teeth and distal tipping forces in the posterior teeth were observed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.2
• /
• pp.389-423
• /
• 1998

This investigation was designed to determine the effectiveness of the posterior occlusal schemes on masticatory activity during mastication in complete denture. Twelve edentulous subjects were selected for this study. All subjects had no past history and no functional abnormality on masticatory system and TMjoint. And, they had residual ridge of favorable morphology, firm mucosa and Class I skeletal jaw relationship, Twelve experimental denture with interchangeable occlusions(0-degree teeth, 30-degree teeth, Levin teeth and S-A teeth) were constructed for this study. The masticatory performance was analyzed by means of standard sieve(10, 16, 20, 30sieve), and the electrical activity from selected muscles(Temporalis and Masseter muscle) was recorded simultaneously with electromyography (Bio-Pak system) as the subject masticated test foods (rice, peanut and gum) with four different occlusal schemes. Mandibular movement was, also, measured with Sirognathography(Bio-Pak system). These recordings were performed in immediately, after 1 week and after 2 weeks of insertion of complete denture. The results were as fellows; 1. The average masticatory performance of 0-degree artificial teeth was higher than any other artificial teeth. 2. Masticatory performance in denture wearer was affected preferentially by food and artificial occlusal schemes. 3. During chewing, there was a statistical difference of EMG activity between masseter and temporal muscle(p<0.01). Especially, EMG activity of working masticatory muscle was highly affected by food rather than by artificial occlusal schemes. 4. In denture wearer, the velocity of opening was not affected by food, whereas, the velocity of closing was faster in soft food chewing than in hard food chewing, and the amount of vertical displacement was grater in chewing of soft and large bolus than in chewing of hard and small bolus. However, the amount of lateral displacement showed conversely(p<0.05). 5. It was considered that masticatory performance in denture wearer is not affected by the condition of residual ridge. the history of denture wear, the preference, the adaptation to artificial teeth and the total mesiodistal length of artificial posterior teeth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.3
• /
• pp.539-573
• /
• 1996

This investigation was designed to determine the effectiveness of the posterior occlusal schemes on masticatory activity during mastication in complete denture. Twelve edentulous subjects were selected for this study. All subjects had no past history and no functional abnormality on masticatory system and TMjoint. And, they had residual ridge of favorable morphology, firm mucosa and Class I skeletal jaw relationship, Twelve experimental denture with interchangeable occlusions(0-degree teeth, 30-degree teeth, Levin teeth and S-A teeth) were constructed for this study. The masticatory performance was analyzed by means of standard sieve(10, 16, 20, 30sieve), and the electrical activity from selected muscles(Temporalis and Masseter muscle) was recorded simultaneously with electromyography(Bio-Pak system) as the subject masticated test foods (rice, peanut and gum) with four different occlusal schemes. Mandibular movement was, also, measured with Sirognathography(Bio-Pak system). These recordings were performed in immediately, after 1 week and after 2 weeks of insertion of complete denture. The results were as follows; 1. The average masticatory performance of 0-degree artificial teeth was higher than any other artificial teeth. 2. Masticatory performance in denture wearer was affected preferentially by food and artificial occlusal schemes. 3. During chewing, there was a statistical difference of EMG activity between masseter and temporal muscle(p<0.01). Especially, EMG activity of working masticatory muscle was highly affected by food rather than by artificial occlusal schemes. 4. In denture wearer, the velocity of opening was not affected by food, whereas, the velocity of closing was faster in soft food chewing than in hard food chewing, and the amount of vertical displacement was grater in chewing of soft and large bolus than in chewing of hard and small bolus. However, the amount of lateral displacement showed conversely (p<0.05). 5. It was considered that masticatory performance in denture wearer is not affected by the condition of residual ridge, the history of denture wear, the preference, the adaptation to artificial teeth and the total mesiodistal length of artificial posterior teeth.

• Journal of Technologic Dentistry
• /
• v.46 no.1
• /
• pp.8-14
• /
• 2024

Purpose: This study compares the deformation of traditional resin dentures to resin dentures printed with digital light processing (DLP). Methods: Eleven edentulous research models were developed. Ten of them were made with traditional resin dentures. The remaining one was prepared for scanning and 3D (three-dimensional) printing. Ten traditional resin dentures were made, with the remaining artificial teeth created using 3D software and a DLP printer. Traditional resin dentures, 3D printed resin denture artificial teeth, and a denture base with artificial teeth were all cleaned simultaneously in an ultrasonic cleaner for 3 minutes. Three groups were assigned four artificial tooth measurement points, which were then measured with digital calipers. The measured data was analyzed using descriptive statistics. The significance test was conducted using a nonparametric test Kruskal-Wallis test due to the small number of specimens (α=0.05). Results: The traditional resin dentures had the lowest strain rate at -0.04%, while the group that manufactured only artificial teeth had the highest strain rate at -0.09%. However, no statistically significant difference was observed between the 3 groups (p>0.05). Conclusion: During ultraviolet-type ultrasonic cleaning, traditional resin dentures (TD group) and denture base with artificial teeth made of DLP (DD group) demonstrated stable durability, whereas the artificial teeth made of DLP (AD group) with only artificial teeth did not show a good deformation rate.

• Imaging Science in Dentistry
• /
• v.50 no.2
• /
• pp.169-174
• /
• 2020

Purpose: Periodontal disease causes tooth loss and is associated with cardiovascular diseases, diabetes, and rheumatoid arthritis. The present study proposes using a deep learning-based object detection method to identify periodontally compromised teeth on digital panoramic radiographs. A faster regional convolutional neural network (faster R-CNN) which is a state-of-the-art deep detection network, was adapted from the natural image domain using a small annotated clinical data- set. Materials and Methods: In total, 100 digital panoramic radiographs of periodontally compromised patients were retrospectively collected from our hospital's information system and augmented. The periodontally compromised teeth found in each image were annotated by experts in periodontology to obtain the ground truth. The Keras library, which is written in Python, was used to train and test the model on a single NVidia 1080Ti GPU. The faster R-CNN model used a pretrained ResNet architecture. Results: The average precision rate of 0.81 demonstrated that there was a significant region of overlap between the predicted regions and the ground truth. The average recall rate of 0.80 showed that the periodontally compromised teeth regions generated by the detection method excluded healthiest teeth areas. In addition, the model achieved a sensitivity of 0.84, a specificity of 0.88 and an F-measure of 0.81. Conclusion: The faster R-CNN trained on a limited amount of labeled imaging data performed satisfactorily in detecting periodontally compromised teeth. The application of a faster R-CNN to assist in the detection of periodontally compromised teeth may reduce diagnostic effort by saving assessment time and allowing automated screening documentation.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.3
• /
• pp.455-461
• /
• 2016

Objectives: The purpose of the study was to investigate the association between remaining functional teeth and oral health-related quality of life using Geriatric Oral Health Assessment Index(GOHAI) in the elderly. Methods: A self-reported questionnaire was completed by 237 female elderly in Daegu from May to September, 2015. The questionnaire consisted of general characteristics of the subjects and Geriatric Oral Health Assessment Index(GOHAI). A total of 216 female elderly data were analyzed for oral health status and their GOHAI score. Data were analyzed using SPSS 23.0 version. Logistic regression analysis showed the association of functional teeth and GOHAI score. Results: Number of functional teeth can affect oral health related quality of life in the elderly. When functional teeth is small, the odds ratio(OR) was 2.119(95% CI: 1.215-3.696). After adjusting age, residence type and education, OR was 1.900(95% CI: 1.060-3.399). Policies to preserve natural tooth should be recommended for increasing quality of life in general. Conclusions: This study showed significant association between number of functional teeth and the GOHAI score of the elderly women.

• Journal of Veterinary Clinics
• /
• v.35 no.4
• /
• pp.137-140
• /
• 2018

A five-month-old toy poodle was referred for treatment of bilateral mandibular fractures. Preoperative skull and dental radiographs showed rostral mandibular fractures and permanent teeth that had not yet erupted. In addition to providing stability for the healing of fractures, it is very important to focus on restoring normal occlusion. The mandibular fractures were repaired using interdental wiring in a dentate area where the deciduous canines and fourth premolars were stable and could be used to anchor the interdental fixation. In the absence of an erupted permanent mandibular first molar, the modified Risdon wiring was performed using the deciduous mandibular fourth premolars as anchor teeth. An intraoral splint was placed on the mandibular teeth using self-curing composite resin. Five months after surgery, the patient had experienced no complications, and the permanent teeth had erupted normally. In this case, which involves a small-breed puppy with deciduous dentition, treatment with a wire-reinforced interdental splint using intact deciduous fourth premolar teeth as anchor teeth can be considered as a suitable method for rostral mandibular fracture restoration.

• The korean journal of orthodontics
• /
• v.21 no.3
• /
• pp.673-683
• /
• 1991

This research was performed to find out the adaptation patterns of maxillary and mandibular posterior teeth to the changes in relationships of vertical skeletal components, which constitute the skeletofacial complex. For this research, 61 adult malocclusion patients were chosen as subjects according to the Hellman's dental age with normally ranged FMN-A-B angle. These subjects were divided into 4 groups in maxilla and 3 groups in mandible according to mesiodistal inclinations of teeth. Following results were obtained after studying the relationships of the vertical skeletal components between each group. 1. Inspire of the fact that the FMN-A-B angle was within a normal range, the degree of mesiodistal inclinations of maxillary and mandibular posterior teeth showed differences in relation to the anteroposterior relationships of maxilla and mandible. In case where the FMN-A-B angle was large, the mesial inclinations of maxillary posterior teeth showed more increase from the posterior to the anterior, whereas in mandible it showed overall decrease. 2. The degrees of mesial inclinations of mandibular posterior teeth were increased when the angulations of lower facial height, occlusal plane angle and mandibular plane angle were greater. 3. The patterns of mesial inclinations of maxillary posterior teeth were varied according to the angulation of lower facial height. If relatively large, it showed more increase from the posterior to the anterior and it was decreased nearly consistent when the angulation was small. 4. The degrees of mesial inclinations of maxillary posterior teeth were decreased as the lower facial height, palatal plane angle, occlusal plane angle and the mandibular plane angle became greater.

• Journal of dental hygiene science
• /
• v.23 no.3
• /
• pp.225-235
• /
• 2023

Background: This study aimed to analyze the effects of periodontal treatment and individual- and tooth-related factors on tooth extraction in people with disabilities. Methods: The Korea National Health Insurance claims data of individuals with disabilities aged 40~64 years with chronic periodontitis in 2008 were obtained. Of these, data on the disabled who underwent scaling/root plaining, subgingival curettage/periodontal surgery, or non-periodontal treatments, and data on their teeth were selected. The extraction of 716,688 teeth from 39,097 patients was tracked until 2018, and the patient- and tooth-level factors related to tooth loss were identified using a mixed-effect logistic regression analysis. Results: Data from approximately 17% of the teeth were extracted during a follow-up period of approximately 11 years. Among the tooth-level variables, scaling/root planing treatment at baseline and periodontal treatment during the follow-up period were associated with a lower risk of tooth loss (odds ratio=0.692 and 0.769, respectively, p<0.001). Non-vital teeth increased the risk of tooth loss by 3.159 times (p<0.001). Among the patient-level variables, females were less likely to have lost their teeth than males, and those with orthopedic impairment or brain lesions/mental disabilities, a higher age group, lower income level, or residents in medium/small cities or rural areas were more likely to have lost their teeth (p<0.001). Conclusion: Through approximately 11 years of follow-up, scaling or root planing, experience with periodontal treatment at least once, female sex, older age, lower income, smaller residential areas, type of disability, and pulp vitality were found to be associated with tooth loss in individuals with disabilities aged 40~64 years with chronic periodontitis. To prevent tooth loss in individuals with disabilities, it is necessary to establish a dental treatment plan that considers the timing of periodontal treatment and the characteristics of the patient and teeth.

• Journal of Technologic Dentistry
• /
• v.34 no.1
• /
• pp.25-36
• /
• 2012

Purpose: The purpose of this study is to investigate the status of oral health behaviors and oral health status, and to analysis the association between health behavior and chronic disease and oral health status of male workers. Methods: The survey used structured self administered questionnaires from September to October in 2009 in Daegu and Gyeongsangbuk-do province, randomize thirty workplace which work more than 50 workers and carry out a survey targeting 30 to 50 age male laborers who work selected workplace. Total of 1,532 replies were analysed. Results: Age, education, monthly income, job was significantly associated with number of toothbrushing, scaling experience, number of missing teeth. Smoking, amount of smoking, frequency of drinking, number of tooth brushing, unmet need and subjective oral health condition, HBP and DM was significantly associated with the number of missing teeth. In logistic regression, age(above 40), monthly income and DM were significant factors on loss of teeth. Conclusion: In conclusion, it is important to provide education on the teeth-brushing and DM management to workers engaged in a small or medium sized workplace with many tooth loss and low educational status, and to recommend a regular scaling as well as to establish policy for creating conditions upon an oral health check-up and a tooth scaling and allow the maintenance of an oral health.