• Journal of Korea Foundry Society
• /
• v.33 no.4
• /
• pp.147-156
• /
• 2013

The effects of core materials on the microstructure and mechanical properties of Al casting products have been investigated. The Al casting samples and cylinder head were fabricated by using organic and inorganic binder core respectively, and their microstructure and mechanical properties were evaluated. The Al casting samples fabricated by using inorganic core showed the better mechanical properties such as tensile strength and elongation than those of the Al casting samples fabricated by using organic core. That's because the Al casting samples contained small amount of pore defects and had fine microstructure compared with the Al casting samples fabricated by using organic core. Also, the use of inorganic core effectively reduced harmful gas emission and pollution.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.345-352
• /
• 2011

This paper focuses on the properties analysis of 9mm bullet dual structure core to substitute current lead core by environment-friendly combination of W-Cu-Ni system high density composite materials. So the four combination samples were made of dual core with the different center of gravity location backward or forward compare to that of lead type bullet, and we experimented about the performance of 9mm bullet dual structure core. In the experimental results, the outer shape of core of four environment friendly samples on the target maintain marginally, while the current lead core bullets are completely crushed after hitting the target. The penetration depth of environment friendly samples excel seven times to lead type bullet and the three out of four samples with forward adjusted center of gravity penetrate deep as twice as ones backward. The impact tolerance of all four samples satisfies military specification, however, more firing tests are required to improve reliability of scattering distribution.

• Journal of Broadcast Engineering
• /
• v.23 no.2
• /
• pp.186-196
• /
• 2018

In this paper, we propose an on-line tracking method using convolutional neural network (CNN) for tracking object. It is well known that a large number of training samples are needed to train the model offline. To solve this problem, we use an untrained model and update the model by collecting training samples online directly from the test sequences. While conventional methods have been used to learn models by training samples offline, we demonstrate that a small group of samples are sufficient for online object tracking. In addition, we define a loss function containing color information, and prevent the model from being trained by wrong training samples. Experiments validate that tracking performance is equivalent to four comparative methods or outperforms them.

• Parasites, Hosts and Diseases
• /
• v.49 no.3
• /
• pp.281-284
• /
• 2011

Amebiasis is a protozoan disease caused by Entamoeba histolytica and a potential health threat in areas where sanitation and hygiene are inappropriate. Highly sensitive PCR methods for detection of E. histolytica in clinical and environmental samples are extremely useful to control amebiasis and to promote public health. The present study compared several primer sets for small subunit (SSU) rDNA and histone genes of E. histolytica cysts. A 246 bp of the SSU rDNA gene of pure cysts contained in phosphate-buffered saline (PBS) and in stool samples was successfully amplified by nested PCR, using the 1,147-246 bp primer set, of the primary PCR products which were pre-amplified using the 1,147 bp primer as the template. The detection limit of the nested PCR using the 1,147-246 primer set was 10 cysts in both groups (PBS and stool samples). The PCR to detect histone gene showed negative results. We propose that the nested PCR technique to detect SSU rDNA can be used as a highly sensitive genetic method to detect E. histolytica cysts in stool samples.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.4
• /
• pp.63-74
• /
• 2022

In analyzing heavy metals in soil samples, the standard protocol established by Korean Minstry of Environment (KSTM) requires two different pretreatments (A and B) based on soil particle size. Soil particles < 0.15 mm in diameter after sieving are directly processed into acid extraction (method A). However, if the quantity of soil particles < 0.15 mm are not enough, grinding of the particles within 0.15 mm ~ 2 mm is required (method B). Grinding is often needed for some field samples, especially for the soil samples retrieved from soil washing process that contain relatively large-sized soil grains. In this study, two soil samples with different particle size distribution were prepared and analyzed for heavy metals concentrations using two different pretreatment to investigate the effect of grinding. The results showed that heavy metal concentrations tend to increase with the increase of the fraction of small-sized particles. In comparison of the two pretreatments, pretreatment A yielded higher heavy metal concentration than pretreatment B, indicating significant influence of grinding on analytical results. This results suggest that the analytical values of heavy metals in soil samples obtained by KSTM should be taken with caution and carefully reviewed.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.4
• /
• pp.1557-1561
• /
• 2012

Objective: To investigate the promoter methylation status of the E-cadherin gene in non-small cell lung cancer (NSCLC) and its association with clinical pathological parameters, and to explore the relationship between downregulation of E-cadherin gene expression and the methylation status of its promoter region. Methods: Nested methylation-specific PCR was performed to examine CpG methylation within the 5' CpG island of the E-cadherin gene in lung cancer and para-cancerous tissue from 37 patients with primary non-small cell lung cancer. Quantitative real-time PCR was performed to measure the level of E-cadherin mRNA. Results: Of thirty-seven cases, 12 (32.4%) samples showed aberrant CpG methylation in tumor tissues compared with the corresponding normal tissues. In addition, a reduction in E-cadherin mRNA levels was observed in 11 of the 12 (91.7%) tumor tissues carrying a methylated E-cadherin gene. However, only 10 (43.5%) cases displayed reduced mRNA levels in tumor tissues from the remaining 23 cases (excluding 2 samples from which mRNA was unavailable) without methylation events. Downregulation of E-cadherin gene expression significantly correlated with the promoter methylation status of this gene. Conclusion: These results provide strong evidence that the methylation status of E-cadherin gene contributes to a reduction in the expression of E-cadherin mRNA, and may play a role in the development and progression of NSCLC.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.2
• /
• pp.46-55
• /
• 2008

This study assesses the formaldehyde and TVOC emissions from bio-composites with attached fancy veneer manufactured using wood flour and polypropylene (PP) measured using the Field and Laboratory Emission Cell (FLEC) method and 20 L small chamber method. To determine and compare the effects of the adhesive, samples were prepared with different manufacturing methods. In the FLEC result, the formaldehyde emission level of the bio-composites with attached veneer by hot-press was the lowest than pure bio-composite and bio-composite attached veneer using adhesive. The TVOC emission levels are similar to the formaldehyde emission. The TVOC emission level is very low in all of the samples except fancy veneer that is attached with bio-composites using adhesive. The TVOC emission varies depending on how attaching fancy veneer. The results of the 20 L small chamber method were very similar to those obtained with the FLEC, but the correlation was not perfect. However, the FLEC method requires a shorter time than the 20 L small chamber method to measure the formaldehyde and TVOC emissions. The internal bonding strength exceeded the minimum value of $0.4N/mm^2$ specified by the KS standard. All of the bio-composites with attached veneer satisfied the KS standard.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.38-45
• /
• 2017

As the competitiveness of SMEs (small and medium enterprises) is getting more and more improved and globalized, the government provides various consulting services to secure the competitiveness of small and medium firms and support stable growth. However, the assessment of the result from the government's support is generally focused on non-financial factors, such as customer satisfaction and analysis of improvement effect. This paper is in regards to the statistical analysis of how much the government's support in the form of providing consulting services contributes to financial outcomes in terms of profitability and growth. ROA (return on asset) and ROS (return on sales), which are investment profitability and sales profitability respectively, are chosen as an indicator of profitability. For analysis of growth, sales revenue and total asset growth are used. The samples are 44 corporations which are supported by government, and 150 corporations which are selected for comparison, with corporate growth support center program by the Ministry of Trade, Industry, and Energy chosen as the consulting model. After gathering the yearly balance sheets and income statements of the samples from CRETOP, Korea Enterprise Data, the analysis is conducted in the way of identifying the statistical significance of financial difference in the same period between corporates taking consulting services and corporates which have not, and the difference of financial outcomes from the corporates taking consulting services before and after consulting services. As a result, in terms of business growth, it is turned out to have positive difference both in growth ratio and profitability compared to the compared corporations at the significant level. Therefore, it is obvious that the consulting program which government provides to SMEs have direct influence practically to the corporates' management performance.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.1
• /
• pp.63-70
• /
• 1998

The changes of contents of trimethylamine oxide nitrogen (TMAO-N), trimethylamine nitrogen (TMA-N), dimethylamine nitrogen (DMA-N), nitrite nitrogen (nitrite-N), nitrate nitrogen (nitrate-N) and N-nitrosamine (NA) of salt-fermented small shrimp were investigated during fermentation. The contents of TMAO-N decreased, while TMA-N and DMA-N increased during fermentation in all samples. Contents of nitrite-N decreased in the samples supplemented with sodium nitrite during fermentation, whereas the formation of N-nitrosodimethylamine (NDMA) increased. Treatment of ascorbic acid revealed inhibiting effort on NDMA formation compared with the control. The model system was used for the evaluation of ascorbic acid (inhibitor) or thiocyanate (promoter) on the formation of NDMA using salt-fermented small shrimp supplemented with sodium nitrite, The optimum pH for the formation of NDMA was 3.5, and ascorbic acid inhibited the formation of NDMA whereas thiocyanate promoted.

• Food Science and Biotechnology
• /
• v.17 no.5
• /
• pp.1119-1121
• /
• 2008

The effects of storage time (0, 1, and 2 month) and temperature (5, 15, and $25^{\circ}C$) on the dynamic rheological properties of hot pepper-soybean paste (HPSP) mixed with acetylated starches (AS) were studied by small-deformation oscillatory measurements. Dynamic moduli (G', G", and $\eta^*$) values of HPSP-AS mixtures increased with an increase in storage time and also decreased with increasing storage temperature. However, dynamic moduli values of the control (no added AS) were independent on storage time and temperature. Tan $\delta$ values (ratio of G"/G') in all HPSP samples did not change much with an increase in storage time and temperature. After 2 months of storage, the dynamic moduli of the HPSP-AS mixture samples were much lower than those of the control, indicating that the addition of AS can inhibit the retrogradation that developed over a long period of storage. Structural and rheological properties of HPSP samples seem to be stabilized by the presence of AS.