• 제목/요약/키워드: small grain

검색결과 772건 처리시간 0.029초

Influence of Wheat Straw Pelletizing and Inclusion Rate in Dry Rolled or Steam-flaked Corn-based Finishing Diets on Characteristics of Digestion for Feedlot Cattle

  • Manriquez, O.M.;Montano, M.F.;Calderon, J.F.;Valdez, J.A.;Chirino, J.O.;Gonzalez, V.M.;Salinas-Chavira, J.;Mendoza, G.D.;Soto, S.;Zinn, R.A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제29권6호
    • /
    • pp.823-829
    • /
    • 2016
  • Eight Holstein steers ($216{\pm}48kg$ body weight) fitted with ruminal and duodenal cannulas were used to evaluate effects of wheat straw processing (ground vs pelleted) at two straw inclusion rates (7% and 14%; dry matter basis) in dry rolled or steam-flaked corn-based finishing diets on characteristics of digestion. The experimental design was a split plot consisting of two simultaneous $4{\times}4$ Latin squares. Increasing straw level reduced ruminal (p<0.01) and total tract (p = 0.03) organic matter (OM) digestion. As expected, increasing wheat straw level from 7% to 14% decreased (p<0.05) ruminal and total tract digestion of OM. Digestion of neutral detergent fiber (NDF) and starch, per se, were not affected (p>0.10) by wheat straw level. Likewise, straw level did not influence ruminal acetate and propionate molar proportions or estimated methane production (p>0.10). Pelleting straw did not affect ($p{\geq}0.48$) ruminal digestion of OM, NDF, and starch, or microbial efficiency. Ruminal feed N digestion was greater (7.4%; p = 0.02) for ground than for pelleted wheat straw diets. Although ruminal starch digestion was not affected by straw processing, post-ruminal (p<0.01), and total-tract starch (p = 0.05) digestion were greater for ground than for pelleted wheat straw diets, resulting in a tendency for increased post-ruminal (p = 0.06) and total tract (p = 0.07) OM digestion. Pelleting wheat straw decreased (p<0.01) ruminal pH, although ruminal volatile fatty acids (VFA) concentration and estimated methane were not affected ($p{\geq}0.27$). Ruminal digestion of OM and starch, and post-ruminal and total tract digestion of OM, starch and N were greater (p<0.01) for steam-flaked than for dry rolled corn-based diets. Ruminal NDF digestion was greater (p = 0.02) for dry rolled than for steam-flaked corn, although total tract NDF digestion was unaffected (p = 0.94). Ruminal microbial efficiency and ruminal degradation of feed N were not affected (p>0.14) by corn processing. However, microbial N flow to the small intestine and ruminal N efficiency (non-ammonia N flow to the small intestine/N intake) were greater (p<0.01) for steam-flaked than for dry rolled corn-based diets. Ruminal pH and total VFA concentration were not affected ($p{\geq}0.16$) by corn processing method. Compared with dry rolled corn, steam-flaked corn-based diets resulted in decreased acetate:propionate molar ratio (p = 0.02). It is concluded that at 7% or 14% straw inclusion rate, changes in physical characteristics of wheat straw brought about by pelleting negatively impact OM digestion of both steam-flaked and dry-rolled corn-based finishing diets. This effect is due to decreased post-ruminal starch digestion. Replacement of ground straw with pelleted straw also may decrease ruminal pH.

재래종(在來種) 율무(의이인(薏苡仁))의 형태적(形態的) 특성(特性)에 의한 분류(分類) (Classification of the Korean Local Pearl Barley(Coix larcryma L.) by the Morphological Characters)

  • 김보경;최봉호
    • 농업과학연구
    • /
    • 제13권1호
    • /
    • pp.17-32
    • /
    • 1986
  • 우리나라에서 재배(栽培)하고 있는 율무의 특성(特性)을 조사(調査)하고, 우량계통선발(優良系統選拔)에 대(對)한 기초자료(基礎資料) 얻기 위(爲)하여 강원도(江原道)와 제주도(濟州道)를 제외(除外)한 전국(全國) 각지(各地)에서 수집(蒐集)한 재래종(在來種) 율무 148 계통(系統)에 대(對)하여 주성분(主成分) 분석(分析)을 하여 재래종(在來種) 율무를 해석(解析)하고 계통분류(系統分類)를 행(行)하였던 바, 이에 대(對)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 특성(特性)의 변이(變異)에서 엽폭(葉幅)과 정곡(精穀) 100립종(粒重)을 제외(除外)하고는 계통(系統)들간의 변이(變異)가 상당(相當)히 심(甚)했다. 2. 모든 형질간(形質間)의 상관(相關)은 비교적 낮았으며 상관계수(相關係數)의 분절(分折)에서 다소(多少) 정(正)의 방향(方向)으로 치우친 정규분포(正規分布)의 양상(樣相)을 보였다. 3. 형질간(形質間)의 상관(相關)에 의해서 율무 계통(系統)을 분류(分類)한 결과(結果) 4 계통군(系統群)으로 분류(分類)할 수 있었는데 제일군(第一群)은 립(粒)과 초형(草型)에 관(關)한 특성군(特性群), 제이군(第二群)은 조만성(早晩性), 제삼군(第三群)은 분엽수(分葉數), 제사군(第四群)은 발아(發芽)에 대(對)한 특성군(特性群)으로 분류(分類)할 수 있었다. 4. 13개(個) 형질(形質)에 대(對)한 주성분(主成分) 분석(分析)의 결과(結果) 제사주성분(第四主成分)까지를 가지고 전체변동율(全體變動率)의 약(約) 60%를 설명(說明)할 수 있었고, 제십주성분(第十主成分)까지를 취(取)하면 전체변동율(全體變動率) 89%를 설명(說明)할 수 있었다. 5. 주성분(主成分)에 대(對)한 형질(形質)의 기여도(寄與度)는 차이(差異)가 심(甚)했고, 상위주성분(上位主成分)에서 높았으며 하위주성분(下位主成分)에서 낮았다. 6. 상관계수(相關係數)가 높은 형질간(形質間)에는 그 형질(形質)에 대응(對應)하는 고유(固有) vector의 값이 크기가 비슷하다. 7. 주성분(主成分) 분석(分析)을 이용(利用)한 계통분류(系統分類)의 결과(結果) 4계통군(系統群)으로 분류(分類)할 수 있었는데 4계통군(系統群)의 특성(特性)은 상관계수(相關係數)에 의한 분류(分類)의 특성군(特性群)과 같은 형질(形質)에 의해 결정(決定)되었다. 8. 계통간(系統間) 거리(距離)에 의해 148 계통(系統)을 4 계통군(系統群)으로 분류(分類)할 수 있었는데 계통군(系統群) I에는 79계통(系統)이 속(屬)하였고, 계통군(系統群)II에는 40계통(系統), 계통군(系統群) III에는 22계통(系統), 계통군(系統群)IV에는 7계통(系統)이 각각(各各) 속(屬)하였다. 9. 계통군(系統群)I은 중간(中稈), 소립(小粒), 중생(中生), 단엽계통(短葉系統)들이었고, 계통군(系統群)II는 단간(短稈), 소립(小粒), 조생(早生), 단엽계통(短葉系統)들이었고, 계통군(系統群)III은 장간(長稈), 대립(大粒), 만생(晩生), 장엽계통(長葉系統)들이었고, 계통군(系統群)IV는 단간(短稈), 대립(大粒), 중생(中生), 단엽계통(短葉系統)들이었다.

  • PDF

자식(自殖)된 다수다얼성(多穗多蘖性) 옥수수(MET)의 특성(特性) 비교(比較) 시험(試驗) (Plant Characters of Selfed MET Maize Line)

  • 최봉호;이희봉
    • 농업과학연구
    • /
    • 제12권2호
    • /
    • pp.166-173
    • /
    • 1985
  • 5세대(世代)나 자화수정(自花受精)시켜 육성(育成)한 다수다얼성(多穗多蘖性)의 MET 계통(系統)의 식물학적(植物學的) 특성(特性)을 알고자 미국종(美國種) 일대(一代) 교잡종(交雜種)옥수수와 3개(個)의 수수${\times}$수단그라스 교잡종(交雜種)과 비교(比較) 시험(試驗)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 전(全) 공시품종(供試品種)들의 일반적(一般的) 생육상황(生育狀況)은 신개간지(新開墾地)에 가까운 토양관계(土壤關係)로 충분(充分)한 생육(生育)을 얻지 못했다(종실수량(種實收量) 등(等)). 2 생육시기별(生育時期別)로 예취(刈取)하여 단위면적당(單位面積當) MET 계통(系統)의 생초중(生草重)을 비교(比較)하여 본 결과(結果) 비교(比較) 옥수수 품종(品種)을 100%로 하였을 경우(境遇) MET 계통(系統)은 평균(平均) 97.8%로서 10a당(當) 5.652kg였다. 3. 단위면적당(單位面積當) MET 계통(系統)의 건물중(乾物重) 역시 비교품종(比較品種)에 비(比)하여 94.5%로서 10a당(當) 1,602kg이었다. 4. MET 계통(系統)의 특성(特性)은 다분얼(多分蘖), 다수성(多穗性)인 관계(關係)로 생초중(生草重)과 건물중(乾物重) 의 증가(增加)는 경엽(莖葉)의 무게에 기인(基因)하였다. 5. 성장속도(成長速度)를 보면 MET 계통(系統)이 자식계통(自植系統)에서 나타나는 자식열세현상(自殖劣勢現象) 때문에 비교품종(比較品種)인 일대(一代) 잡종(雜種)들에 비(比)하여 매우 저조(低調)하였다(MET의 평균(平均) 초장(草長)은 234.7cm, 그외(外) 교잡종(交雜種)의 평균(平均) 초장(草長)은 250.7cm였다). 6. MET 계통(系統)과 비교(比較)하기 위(爲)해 공시(供試)한 다른 4개품종(個品種)은 모두 미국(美國)에서 널리 재배(栽培)하는 다수성(多收性) 품종(品種)이지만 본(本) 연구(硏究)에서는 흑조위축병(黑條緯縮病)에 매우 약(弱)한 것으로 나타났다(미국종(美國種) 평균(平均) 이병율(罹病率)은 20% 이상(以上), MET 계통(系統)은 5%였다). 7. 종실수량(種實收量)을 보면 MET 계통(系統)이 10a당(當) 390.1kg으로 다른 미국종(美國種)의 평균수량(平均收量) 508.7kg에 비(比)하면 약(約) 76.7% 밖에 안되었다. 그러나 주당(株當) 종실수(種實數)로 환산(換算)하면 1,170개(個)로 미국종(美國種)들의 690개(個) 보다 훨씬 많았다. 이처럼 10a당(當) 종실수량(種實收量)을 무게로 환산(換算)하면 MET 계통(系統)이 적은 이유(理由)는 MET 계통(系統)이 자식계통(自殖系統)과 유사(類似)하기 때문이고 입수(粒數)로 환산(換算)하면 MET가 많은 것은 이 계통(系統)이 소립종(小拉種)(100립종(粒重)=10gr정도(程度))이기 때문이다. 8. 3개(個)의 수수${\times}$수단그라스 교잡종(交雜種)의 청예(靑刈) 수량(收量)을 MET 계통(系統)과 비교(比較)한 결과(結果) 10a당(當) 생초중(生草重)이나 건물중(乾物重)이 모두 MET 계통(系統)과 큰 차이(差異)가 없었다. 9. 따라서 농민(農民)이 재배(栽培)할 교잡종(交雜種) 값이 고가(高價)인 경우(境遇)에 MET 계통(系統)을 청예용(靑刈用)으로 이용(利用)하는 것은 종자대(種子代)의 절감(節減)은 물론(勿論) 단위면적당(單位面積當) 필요(必要)한 종자량(種子量)이 다른 교잡종(交雜種)에 비(比)해 적어 이중(二重)의 효과(效果)를 얻을 수 있을 것으로 생각된다.

  • PDF

포항-울산간의 점토자원의 지질과 그 물리화학적 특성에 관한 연구 (A Study on Geology of Clay Mineral Deposits of Pohang-Ulsan Area and their Physico-Chemical Properties)

  • 김옥준;이하영;김서운;김수진
    • 자원환경지질
    • /
    • 제4권4호
    • /
    • pp.167-215
    • /
    • 1971
  • I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

  • PDF

Ag-30wt% Pd-10wt% Cu 3원합금(元合金) 및 Au 첨가합금(添加合金)의 시효경화특성(時效硬化特性) (The Effect of Au Addition on the Hardening Mechanism in Ag-30wt%Pd-10wt%Cu Alloy)

  • 이기대;남상용
    • 대한치과기공학회지
    • /
    • 제21권1호
    • /
    • pp.27-41
    • /
    • 1999
  • 치과용 Ag기 합금에서 30wt%Pd 및 10wt%Cu의 용질농도의 구성비가 3이 되는 3원 합금과 여기에 2wt% Au의 첨가에 미치는 석출상의 영향을 조사 분석하여 아래와 같은 결론을 얻었다. Ag-Pd-Cu 3원 합금은 $\alpha$ 단일상에서 Ag-rich ${\alpha}_2 $ 및 PdCu 규칙상에 의해서 경화반응이 진행되며 연속승온시효곡선에 의하면 100-$300^{\circ}C$의 저항증가와 300-$500^{\circ}C$의 저항감소라고 하는 2단계 변화에 의해서 경화곡선이 얻어졌다. 또한 본 합금의 시효과정에서는 ${\alpha}{\to}{\alpha}_2+PdCu{\to}$의 2상 분리반응에 의하여 경화원인이 되었다. 석출과정은 ${\alpha}{\to}{\alpha}_1+PdCu{\to}{\alpha}_2+PdCu$ 이고 Cu-rich인 ${\alpha}_2$상은 거의 나타나지 않으며 최고 경도값은 ${\alpha}_2$ 및 PdCu의 2상공존 구역에서 나타났다. 미량의 Au첨가에 의해서 경화는 다소 증가하지만 경화성보다는 내식성에 보다 크게 기여하였고 Pd/Cu=3인 합금은 Pd/Cu=1 또는 1.7의 합금보다도 전반적으로 경도값은 가장 낮게 나타나며 이것은 치과용 Ag기 합금의 시효경화성에는 Cu농도가 크게 기여하였다. 불연속석출물인 nodule 생성물은 입계에 우선 형성되어 $\alpha$ matrix로 진행되어 nodule 석출물은 부드러운 경계면을 가지고 $\alpha$ matrix주위에 strain matrix를 나타내므로 nodule 형성이 본 합금의 시효경화를 야기하였다. 내식성은 Pd 함량이 가장 높은 본 합금에서 매우 양호하게 나타났으며 Pd 함량이 증가가 내식성의 향상에 크게 기여하여 미량의 Au 첨가에 의해서 보다 현저히 효과를 얻었다. 본 합금의 시효열처리 조건은 $450^{\circ}C$ 적절하며 1-120min 시효시간에 걸쳐서 소정의 경도 값을 얻을 수 있고 시효경화성 및 내식성의 결과로부터 Ag-30wt%Pd-10wt%Cu합금 및 미량 Au 합금은 치과용 금속재료로 적합하였다.

  • PDF

Recent research activities on hybrid rocket in Japan

  • Harunori, Nagata
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제36회 춘계학술대회논문집
    • /
    • pp.1-2
    • /
    • 2011
  • Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

  • PDF

한국의 도작과 풍수해 (Wind and Flooding Damages of Rice Plants in Korea)

  • 강양순
    • 한국작물학회지
    • /
    • 제34권s02호
    • /
    • pp.45-65
    • /
    • 1989
  • 우리나라는 지형과 기후가 복잡다양한 데다가 하절기에는 필리핀 남양군도로부터 상습적으로 불어오는 태풍의 진로권내에 위치해 있고 년간 강우량의 대부분이 벼 재배기인 하절기에 집중적으로 내리는 관계로 이때 강우와 강풍이 단독 또는 동반하여 갖가지 풍수해양상을 일으킨다. 풍해는 조풍해, 건조풍해 및 강풍해로 구분하여 볼 때 조풍해(염풍해)는 1986년 8월 28~29일 태품 Vera호 내습시 남부 해안지방 일대에서는 강우가 그치면서 염분을 함유한 초속 6m정도의 강풍이 불어 해안으로부터 2.5km까지 도체 조기에 염분을 건물당 1.1~17.2mg 부착시켜 심한 조풍해를 일으켰다. 그리고 건조풍해는 '87년 이래로 내습한 대부분의 태풍들이 4.0~8.5m의 태풍이 남부 및 동해안에 불어 Foenhn 현상으로 건조풍이 되고 이때 출수기에 처한 벼 이삭은 심한 백수피해와 변색위피해를 받았다. 태풍해로서는 풀수기 이전의 벼 생육단계에서 경엽이 기계적으로 절상, 파열, 고사되고, 등숙기에는 도복과 탈입이 심하게 된다. 풍해경감은 태품 내습을 회피하도록 8월 15일까지 출수시키고 풍해저항성이 비교적 강한 상풍벼와 청청벼 재배가 효과적이다. 한편 수해로서는 농경지 유시, 이몰, 침관수 및 도복 등을 들 수 있으나 각종 Dam, 제방축조, 하구언공사 등으로 피해는 많이 줄었지만 국지적 집중호우나 강변유역 제방내의 내수로 인한 침관수나 도복피해는 상습적으로 일어난다. 핌관수해는 태풍과 다우가 주로 8월 말경에 내습하여 2~4일 정도 도체가 관수된다. 이따 남부 특수만식답의 벼생육단계는 생육초중기에 해당되므로 어린 생육단게일수록 피해가 크고 보통식세어는 생식생장기에 해당되므로 유수나 팬이삭은 불념이 되더라도 죽은 이삭을 갖는 경의 상위절로부터 재생경이 나와 정상이삭으로 되어 수량 감소가 가장 튼 감수분열기 피해에서도 66%의 수량보상력을 갖게 된다. 침관수피해 경감을 위해서는 사전적 조처로서 관수저항성 및 백엽고, 벼멸구, 도복저항성을 갖는 품종을 선택 재배하는 것이 효과적이다. 특히 통일형 품종은 일본형 품종에 비하여 관수시 모든 생육단게에서 관수저항성이 강한데 묘생존율이 높고, 엽신과 엽초의 이상신장력이 낮아 퇴수시 기술적 장해가 적으며 생식생장기에는 근활력, 광합성능력이 높아 피해회복이 빠르고 고위절분얼이삭에 의한 수량보상력이 높다. 이상을 종합하여 볼 때 풍수해를 최소화하기 위해서는 다음과 같은 연구가 금후 이루어져야 할 것이다. \circled1 기상예보, 풍수해 피해실태 및 그로 인한 작황 등의 원격탐사 및 전산화에 의한 분석 연구가 이루어져야 하고, \circled2 품수해와 관련된 불량환경에서 내성을 갖는 품종 육성 보급이 이루어져야 하고, \circled3 품수해 발생상습지에서는 벼 피해를 보상할 수 있는 타작물과의 함리적 작부체계 개선 연구가 이루어져야 하고, \circled4 피해도체의 활용도 증진 연구가 이루어져야 할 것이다.

  • PDF

수도종자에의 Dimethoate 침투력 및 발아저해에 관여하는 요인에 관한 연구 (The Factors Influencing the Systemic Action of Dimethoate (O.O-dimethyl-S-(N-methylcarbamoylmethyl) phosphorodithioate) to the Rice Seeds and Phytotoxic Effects)

  • 최승윤
    • 한국응용곤충학회지
    • /
    • 제9권2호
    • /
    • pp.57-74
    • /
    • 1970
  • 본 실험은 볍씨를 Dimethoate 액에 침지처리하였을 경우 약제의 침투량 및 볍씨의 발아생리에 미치는 여러 가지 요인의 영향을 추정하기 위해 수도품종 12개를 공시하여 침지시간, 농도 및 온도에 따르는 약제침투량 그리고 처리에 의한 볍씨의 발아생리에 미치는 영향에 관하여 실험하여 다음과 같은 결과를 얻었다. 1) Dimethoate 침투량은 공시품종에 따라 현저한 차이가 있으며 볍씨 100입당 약제침투량은 수성>관옥>농광>진흥>팔달>승판 5호>수원 82호>농림 6 호>시로가네>신 2호>풍광>재원의 순서 이었고 종자당 약제 침투량은 대립종에서 많았고 소립종에서 적었으며 1g당 약제침투량은 그와 반대로 소립종에서 많았다. 약제침투량과 볍씨의 흡수율과의 상관은 $\gamma=+0.35$로 낮았다. 2) 약제침투량은 침지시간, 농도 및 온도에 따라 차이가 있었으며 특히 처리온도의 영향이 컸다. $0.1\%$ Dimethoate에 48시간 침지처리하였을때 볍씨 1g당 약제 침투량은 $15^{\circ}C$에서는 0.174mg, $20^{\circ}C$술에서는 0.208mg 및 $30^{\circ}C$에서는 0.397mg이었다. 3) Dimethoate처리가 볍씨의 발아에 미치는 영향은 품종에 따라 현저한 차이가 있었는데 발아저해도의 순위는 $0.1\%$ Dimethoate액에서 24시간 처리의 경우 팔달>수원 82 호>진흥>풍광>재건>시로가네>농광> 농림 6 호>신 2호>수성>승판 5호>관옥이었고 48시간 처리의 경우 진흥>승판 5호>수원 82호>팔달>농광>재건>신 2호>관옥>시로가네>풍광>수성>농림 6호이었으며 발아저해도와 약제침투량간의 상관은 $\gamma=0.683$로 유의하였다. 4) Dimethoate처리$(30^{\circ}C,\;0.2\%$액에서 24시간)에 의하여 볍씨의 발아가 억제되었으며 평균발아속도는 약 2일 지연되었고 그 정도는 품종에 따라 차이가 있었다. 5) 공시품종의 발아속도와 발아저해율과는 정의 정관$(\gamma=+0.78$을 나타내었으며 발아속도가 빠른 품종에서 발아저해율이 낮았고 딴대로 발아속도가 늦은 품종에서 발아저해가 심하였다. 6) 공시품종의 화학적조성중 단백질이 발아저해도와 가장 관계가 깊었는데 단백질의 함량이 낮은 품종은 Dimethoate에 의한 발아저해가 높은 경향을 보였다. 7) 공시품종의 KOH 붕괴도는 품종간에 현저한 차이가 있었으며 KOH 붕괴도가 큰 품종이 발아저해가 심하고 작은 품종은 덜한 경향을 보였다. 또한 KOH 붕괴도와 단백질 함량과는 $\gamma=-0.422$의 높은 상관을보였다. 8) 공시품종의 산소호흡량은 품종에 따라 현저한 차이가 있었으며 Dimethoate처리$(30^{\circ}C,\; 0.2\%$액에서 24시간)에 의하여 볍씨의 호흡량이 감소되었다. 9) 산소호흡량과 평균발아소요일수와는 $\gamma=-0.945$로 부의 유의한 상관을 보였는데 산소호흡량이 많은 품종은 평균발아소요일수가 짧은 경향을 보였다. 10) 볍씨의 산소호흡량과 Dimethoate 처리에 의한 볍씨의 발아저해도와는 $\gamma=-0,771$의 높은 부의 상관을 보였으며 산색호흡량이 많은 품종이 발아저해도가 낮고 적은 품종에서는 높았다.

  • PDF

일제하(1920~30연대) 조선과 대만 그리고 프랑스와 독일 수형인의 식품공급상황 비교 (Comparison of Food Supply Status of Korean(Chosun) and Taiwan Prisoners under the Period of Japanese Rule with That of French and German Prisoners in 1920~1930′s)

  • 허채옥
    • 동아시아식생활학회지
    • /
    • 제13권4호
    • /
    • pp.267-283
    • /
    • 2003
  • 1920~30년대 일제 하 개성 소년형무소를 비롯한 조선내 형무소의 주식공급량과 대만 신죽 소년형무소 및 프랑스 후레누 감화원, 독일 모아비트 구치소간의 영양조사 자료를 통해 당시 세계공황과 일본의 식량난 속에서 수형인의 식생활 실태를 재검토한 결과를 다음과 같다. 1. 1920년대 조선내 형무소의 주식공급상태 1) 식사가 12등급으로 나누어 제공되었으며 급여열량의 차이로 볼 때 활동정도에 따라 구분하였을 것이다. 목포형무소 1등급이 6045.0 ㎉, 마산형무소 12등급이 1855.8 ㎉로 각 형무소의 잡곡사용비유과 식이등급에 따라 열량공급량의 차이가 큰 것을 알 수 있다. 2) 단백질, 지방, 탄수화물의 평균 열량비가 20.0 : 20.2 : 59.8로 단백질의 공급량이 의외로 높은데 이것은 주식 중 콩의 비율이 높기 때문이다. 개성형무소를 제외하고 주식 중 콩의 사용비율은 20~60%이다. 주식에서의 단백질의 양이 높다하더라도 모두 식물성단백질이지만 다른 곡물에 부족한 lysine에 대한 보충작용의 효과가 컸을 것으로 기대된다. 3) 콩을 공급하지 않은 개성소년형무소는 단백질과 지방의 열량비가 각각 8.3%, 8.1%로 낮고 탄수화물의 공급량이 높아 성장기 소년 수형인에게는 부적절하다고 사료된다. 2. 각 형무소의 영양공급량의 종합적 비교 대만 프랑스, 독일 형무소와 본 논문의 전보로 수행된 (Kim CH 2003) 조선 경성형무소의 영양상황을 종합적으로 파악하기 위하여 중등활동을 하는 수형인에게 공급된 영양량으로 비교하면 다음과 같다. 1) 경성형무소 중등활동 수형인에게 공급된 열량은 1일 3966.5 ㎉, 단백질, 지방, 탄수화물의 열량비는 18.9 : 16.6 : 64.5로 단백질은 약간 높고 지방은 약간 낮으나 3대 영양소의 균형정도는 양호하다고 볼 수 있으며 오히려 총열량이 너무 높은 것으로 사료된다. 2) 대만 신죽 소년형무소에서는 주식은 쌀과 고구마를 7:3으로 혼합하여 6등급으로 구분하여 공급하였으며 부식은 1주일 cycle menu로 작성되었다. 열량섭취량은 1등급에서 2862.9 ㎉, 6등급에서 1388.9 ㎉로 성장기 소년 수형인에게는 충분한 공급이라고 할 수 없다. 단백질과 지방의 열량 섭취량도 적으나 돼지고기, 돼지기름, 잡어, 유부등의 음식을 제공하므로 동물성 단백질과 지방이 어느 정도 공급되었을 것이다. 3) 프랑스 후레누 감화원과 독일 모아비트 구치소는 1일 총열량섭취량이 각각 2771.3 ㎉, 2678.7 ㎉로 당시 열량권장 기준으로 간주되었던 3000 ㎉, 현재 중등활동 성인열량권장량인 2500 ㎉ 어느 쪽으로 비교해도 적정량이 공급되었다고 할 수 있으며, PFC 비율은 후레누 감화원에서 16.2 : 12.0 : 71.8로 지방이 부족하고, 모아비트 구치소에서는 12.4 : 14.3 : 73.3으로 단백질과 지방이 약간 부족하다고 볼 수 있다. 4) 법무부 급식관리위원회의 수용자 급식기준과 각 형무소의 보통활동 수형자를 위해 공급하는 영양량을 종합적으로 비교해보면 총열량 공급량은 조선 경성형무소(Kim CH 2003)에서는 3966.5 ㎉로 급식기준열량의 159.9%로 공급량이 높았으며, 대만 신죽 형무소에서는 소년 수형자임에도 89.6%만을 공급하고 있었다. 프랑스와 독일은 각각 110.9%, 107.1%로 급식기준을 조금 넘는 적정열량에서 가까운 양을 공급하였다고 할 수 있다. 일제하의 조선, 세계공황 이후 식량이 극도로 부족한 상황에서 대만, 유럽의 프랑스와 독일 모두 단체로 수용되어 있는 수형인들에게 적정영양량을 찾기 위해 노력하였다는 것을 알 수 있다. 다만 조사된 것이 계획에 불과한 것이 아니었는지 의문시된다.

  • PDF

고려 나전국화넝쿨무늬상자의 제작기법 고찰 및 원형 연구 (A study on the production techniques and prototype of the mother-of-pearl chrysanthemum pattern box from the Goryeo Dynasty)

  • 이희승;이민혜;김성훈;이현주
    • 헤리티지:역사와 과학
    • /
    • 제57권1호
    • /
    • pp.126-144
    • /
    • 2024
  • 고려시대 나전국화넝쿨무늬상자는 미세한 자개표면에 문양을 세기거나, 금속선을 이용해 넝쿨의 줄기를 표현하고, 금속선을 꼬아 각 문양의 경계를 구성하는 등 고려나전칠기의 대표적인 특징이 아주 세밀하게 표현되어있다. 현재 남아있는 고려시대 나전칠기는 경함 및 합의 형태를 가지고 있는 반면 이번 연구대상인 나전국화넝쿨무늬상자는 뚜껑과 몸체가 분리되는 상자의 형태를 하고 있어 제작목적 혹은 보관된 내용물을 추정하기 어려웠다. 이번 연구에서는 나전국화넝쿨무늬상자의 원형을 확인하기 위해 조형적인 특징을 확인하고, X선 투과촬영과 X선 형광분석을 통해 구조와 제작기법에 대해 규명하고자 하였다. 그리고 기존에 알려진 고려시대 나전칠기를 유형별로 분류 및 비교분석해 상자의 용도와 제작목적을 규명하고자 하였다. 조사결과 X선 이미지 상 바닥면과 속상자에서 직물이 확인되었다. 이를 통해 기물을 직물로 감싸는 목심저피칠기기법이 사용된 것을 확인할 수 있었다. 그리고 목리를 통해 복원부분으로 추정되는 부분의 판재구성과 기존 장석이 있었을 것으로 추정되는 부분을 확인할 수 있었으며 결구부에서 맞대임 방식으로 연결한 것을 확인할 수 있었다. 문양에 사용된 금속선은 X선 형광분석 결과 황동으로 판단된다. 조사결과를 근거로 현재 남아있는 고려시대 경함류 9점, 상자류 3점, 소상자류 2점 등 총 14점을 유형별로 분류해 유사성을 조사하였다. 이중 일본 개인소장 국화넝쿨무늬경함, 도쿠가와미술관 흑칠지국당초문나전경상, 영국박물관의 나전국당초문경함, 국내소장 나전칠국당초문합(소상자) 등 5점의 문양구성이 본 연구대상과 가장 유사하였다. 그리고 손상양상, 조형적 특성, 구조적 특징 등을 부위별로 대조한 결과 영국박물관의 나전국당초문경함의 형태가 나전넝쿨무늬상자의 원형으로 현재 형태로 변형된 것으로 추정된다. 마지막으로 이번 상자의 용도, 즉 제작목적을 확인하기 위해 당시 고려의 사회분위기와 비슷한 시기 제작된 고려대장경 인경본의 사례를 조사하였다. 당시 무신정권 이후 몽골의 침입을 겪으면서 국가의 안정과 개인의 명복을 빌기 위한 사경이 출현, 그리고 13세기 국내 인쇄술과 종이의 발전으로 점차 두루마리에서 절첩식 형태로의 전환기와 맞물려 경함에서 상자의 형태로 보관방식이 변경된 것으로 판단된다.