• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.2
• /
• pp.107-113
• /
• 1973

A pot experiment on paddy rice was carried out to investigate the effect of temperature after heading with application of phosphate, potash and silica on the yield and nutrient uptake. The results obtained are as follows: 1. The Grain yield was greatly affected by temperature during ripening. The yield at $20^{\circ}C$ and at $15^{\circ}C$ decreased to 62.3% and to 37.2% of that at $25^{\circ}C$ respectively. However, the application of phosphate, potash and silica at transplanting increased the grain yield even at low temperature of $15^{\circ}C$. 2. Percentage of ripened grain and weight of 1,000 grains decreased with decreasing temperature but they were increased by the application of phosphate, potash and silica at the low temperature of $15^{\circ}C$. 3. The grain filling rate was fast in the early stage of ripening at high temperature while it was fast in the later stage at low temperature. Low temperature damage was severe in the early stage of ripening. 4. Accumulation of carbohydrate in the grain was small at low temperature of $15^{\circ}C$ and the application of phosphate, potash and silica was effective to increase carbohydrate content in the grain at low temperature. 5. The content of T-N and $P_2O_5$ in straw grown at low temperature were high whereaas those of $K_2O$ and $SiO_2$ were low which were increased by the application of potash and silica. 6. There was a positive correlation between the grain yield and rate of ripening, 1,000 grain weight, contents of $K_2O$ and $SiO_2$, $K_2O/N$ and $SiO_2/N$ ratio, but a negative correlation between grain yield and contents of T-N and $P_2O_5$ in the straw at harvesting stage. 7. Ripening rate and weight of 1,000 grains showed a significant positive correlation with $K_2O$, $SiO_2$, $K_2O/N$ and $SiO_2/N$ ratio in the straw. Further, there was a negative correlation between ripening rate and the contents of T-N and $P_2O_5$ but a positive correlation between weight of 1,000 grains and these elements.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1125-1125
• /
• 2001

Micro-scale test methods are producing small-sample size where the conventional physical and chemical tests can not be used (high standard deviation, uncertain sampling conditions, low repeatability). Different small-scale test methods were developed recently for determination of physico-chemical, functional, rheological properties of wheat or wheat dough using miniaturized instruments with sophisticated sample preparation/handling and mechanics (RVA, 2 g mixograph, micro-Z-arm mixer, small-scale noodle maker, micro-baking method etc.). The small-scale methodologies can be used as basic research tools or as technology supported measurements and can be also essential in the early selection for quality traits in breeding programs. The milling as a sample preparation step is essential procedure providing good quality flour or semolina samples from small amount of grain (5-10 g) in a reproducible and reliable way. The aim of present study was to use NIR as quality control tool, and to evaluate the recently developed and manufactured micro-scale lab mill (FQC-2000) produced by Inter-Labor Co. Ltd., Hungary. The milling characteristics of the new instrument were compared to other laboratory mills and the effects of milling action on the chemical composition of fractions were analysed. The fractions were tested with both chemical and near infrared spectroscopic methods. The micro-scale milling resulted significantly different yields, particle size distributions and different fractions from compositional point of view. The near infrared spectra were sensitive enough to distinguish the fractions obtained by different milling procedures. Quantitative NIR calibration equations were developed and tested in order to measure the chemical composition of characteristic milling fractions. Special qualification procedure the PQS (Polar Qualification System) method was used for detecting the differences between fractions obtained by macro and micro-milling procedures. The results and the limitations of PQS method in this application will be discussed.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.3
• /
• pp.143-150
• /
• 2005

These experiment was conducted to determine the effect of nitrogen fertilizer levels and mixture small grains on productivity and quality of spring forage rape at south region of Korea(Mokpo). The experiment was arranged in a split plot design with three replications. The main plots consisted of three different levels of nitrogen fertilizer(100, 150 and 200 kg/ha). The sub plots consisted of five kinds of mixed small grain species(Rye, Oat, Barley, Italian ryegrass, and Rape monoculture). The results obtained are summarized as follow. Dry matter(DM) content of Rye + Rape and Ba.ley + Rape mixtures were increased by $2\~3\%$ compared to Rape monoculture. The high level of nitrogen application increased the fresh matter yield, and yield of Rye + Rape and Rape monoculture were higher than that of others. Dry matter yield of Rye + Rape mixture and Rape monoculture with 200kg/ha of nitrogen application were higher by 9,449 and 9,227 kg/ha, respectively. The crude protein(CP) content of rape was high as $18.6\%$ while average CP content was $16\%$. The average total digestible nutrient(TDN) content showed high as $70\%$. It is suggested the Rye + Rape mixture or Rape monoculture would recommendable for spring usage of rape at south region of Korea.

• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.31-37
• /
• 2008

A variety of the porcelain fused to gold(PFG) have been developed to which porcelain can be fused. PFG alloys developed for this purposed have a high melting point and do not discolor when combined with porcelain. The design of the compositions of PFG is very important to esthetic restorative materials applying to porcelain. The purpose of this study is on the change of physical and mechanical characteristics in PFG 18K alloy by the small additional elements. Principal results are as follows. The high Au alloy containing 18Karat gold contents is respectively Au(75%), Pd(10%), Pt(4%), Ag(4%), In(2%), Sn(2%), Cu(2%), Ti(1%). These alloys are composed mainly of gold, platinum, silver and palladium with a few percent of the additional elements. By the addition of small amounts of elements such as In, Sn, Ti, the fine grain castings are produced in gold alloy and the small addition of platinum is very effective in increasing of hardness and strength. These gold alloys are representative of the changes to be expected as a result of heat treatment. These changes in strength and hardness values are sufficient to demonstrate a significant difference in performance between a as-casted and a heat-treated. These alloys have mechanical properties characteristics of Type and Type gold alloys. These alloys are useful to porcelain-metal restorations and dental laboratory. Also the porcelain fused to metal(PFM) alloys containing gold are commonly use for dental purposes in dental laboratory.

• Economic and Environmental Geology
• /
• v.26 no.4
• /
• pp.455-464
• /
• 1993

Some nodules occur in the Milyang pyrophyllite deposit which are hydrothermal alteration products by Late Cretaceous andesitic tuff. These nodules are divided into two types on the basis of mineral assemblages; diaspore and pyrophyllite nodules. The diaspore nodules consist mainly of diaspore, kaolinite, pyrophyllite and pyrite with a small amounts of wavellite and tourmaline. They are light purplish grey in color, ellipsoid in shape and range 1 cm to 15 cm in size. A small or large diffuse band exists in some nodules. The platy coarse-grained diaspore is intergrown with the fine-aggregated kaolinite in the central part of the nodule. It appears that the grain size become fine from center to margin. The pyrophyllite nodules, which have the same shape with diaspore nodules, consist dominantly of pyrophyllite accompanied by small amounts of quartz, kaolinite, svanbergite, wavellite, tourmaline and apatite. Chemical compositions of alteration zones and nodules show that the wall rock alteration involved mainly the removal of large quantities of silica and alkalies and small quantities of Ca, Mg and Fe. The sharp increase in the Al content of the nodules is the result of residual concentration of alumina by the leaching of the mobile components. The pyrophyllite nodules were formed in the fluid saturated with quartz as ${\mu}_{HK_{-1}}$ and ${\mu}_{H_{2}O}$ increase. Under this condition, the pyrophyllite-kaolinite-quartz assemblage was stable. Diaspores formed from pyrophyllites in the fluid undersaturated with quartz as ${\mu}_{H_{2}O}$ increases (decreasing temperature). Under this condition, diaspore-pyrophyllite-kaolinite assemblage become stable. The formation temperature of the nodules on the basis of mineral assemblage is estimated as $275{\sim}340^{\circ}C$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.6
• /
• pp.568-575
• /
• 1991

The morpho-anatomical characteristics of panicle in rice plant is generally correlated with the number of spikelets and grain weight per panicle. For the increase of grain yield potential in rice, a low -tillering plant type with large panicles has been suggested as an ideotype. This study was conducted to investigate the panicle morphology and peduncle anatomy of different tillers within a plant in low -and high-tillering cultivars and their relationships on the number of spikelets and grain weight per panicle. A low-tillering, large panicled IR25588 was compared with a high-tillering. small panicled IR58. IR25588 had more inner(IVB) and outer vascular bundles (OVB). bigger peduncle diameter and peduncle thickness just below the panicle neck node than IR58. The top six tillers(M. P1, P2, P3. P4 and S1P2) within a plant had more IVB and OVB. larger peduncle diameter and thickness than the rest of the tillers in both cultivars. Tillers that emerged earlier had more IVB and OVB than tillers that emerged Jater. The total number of primary and secondary rachis-branches of IR25588 was much higher than that of IR58. IR25588 had more number of spikelets per panicle than IR58. and the top six panicles showed more spikelets per panicle than the rest of the panicles in both cultivars. The peduncle diameter was more important than peduncle thickness on the spikelet differentiation and panicle weight. especially in low-tillering cultivars. The number of IVB and OVB were highly correlated with the number of rachis-branches. spikelets and grain weight per panicle. The number of spikelets per IVB and spikelets per primary branch were higher in IR25588 than IR58 indicating the higher sink strength in low -tillering with large panicled cultivars than in high-tillering with small panicled cultivars. Based on the morpho-anatomical characteristics of a low-tillering cultivar and the top six tillers within a plant. the present results could be support that 'a low-tillering sturdy culms with large panicles' is an ideo-type of rice plant for increasing grain yield potential.potential.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.2
• /
• pp.129-142
• /
• 1986

Fifty-five local collections of buck wheat, Fagopyrum esculentum, were investigated their ratios of long-styled (LS) and short-styled (SS) flowers, fertility, meiosis of megaspore and microspore mother cell, female and male gametogenesis, and egg apparatus in accordance with the sowing seasons (spring, summer), altitudes (20m, 50-100m, 300m), and parent style types (L, S). Also they were embryologically investigated the fertility, fertilizing phenomenon and proembryogenesis by the legitimate and illegitimate pollination. There were no differences in the ratios of long-styled and short-5tyled flowers along with altitudes, but more irregularness was observed in plain area than that in the mountaineous or coastal area. LS versus SS ratios by sowing seasons were significantly separated into 1 : 1 in the summer sowing (P 0.1), but they were irregularly separated in the spring sowing. The segregating ratios by parent style types showed more number of short-styled flower in the spring sowing, and were statistically seperated into 1 : 1 in the summer sowing (P 0.25), regardless to parent style types. In the artificial legitimate union, the seed setting rates of the summer sowing (59-61%) were much higher than those of the spring sowing (about 30%), but in the artificial illegitimate union the seed setting rates were only fructified about 0.8-1.8% in the spring sowing. The seed setting rates in accordance with flowering stages were larger in turn early, middle, late, in the summer sowing. The grain number and grain weight per plant of short-styled flower were more than those of long-styled one regardless to style types. The 1,000 grain weight of long-styled flower was heavier than that of short-styled one in large grain, but it was lighter than that of short-styled flower in small or medium grain. The percentage of normal female and male gametogenesis in the summer sowing were higher than those in the spring sowing. The ovule was atropous and two polar nuclei were a synkarion before flowering. The pollens germinated at 30 minuts after pollination and the pollen tube grew continually and penetrated into micropyle at 1.5-2 hours and the two male nuclei fertilized with egg nucleus at 3 -5 hours after pollination. Flertilizing times in summer were shorter than in autumn. The fertilized egg was divided in a small apical cell toward the interior of the embryo sac and a large basal cell toward the micropyle cell at 15-24 hours after pollination, and division times in summer were shorter than in autumn. The proembryo began the embryogenesis at 7-8 days and formed itself into the perfect embryo at 15 days after pollination.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.59.1-59.1
• /
• 2010

Aluminum-induced crystallization (AIC) of amorphous silicon (a-Si) is studied with the structure of a glass/Al/$SiO_2$/a-Si, in which the $SiO_2$ layer has micron-sized laser holes in the stack. An oxide layer between aluminum and a-Si thin films plays a significant role in the metal-induced crystallization (MIC) process determining the properties such as grain size and preferential orientation. In our case, the crystallization of a-Si is carried out only through the key hole because the $SiO_2$ layer is substantially thick enough to prevent a-Si from contacting aluminum. The crystal growth is successfully realized toward the only vertical direction, resulting a crystalline silicon grain with a size of $3{\sim}4{\mu}m$ under the hole. Lateral growth seems to be not occurred. For the AIC experiment, the glass/Al/$SiO_2$/a-Si stacks were prepared where an Al layer was deposited on glass substrate by DC sputter, $SiO_2$ and a-Si films by PECVD method, respectively. Prior to the a-Si deposition, a $30{\times}30$ micron-sized hole array with a diameter of $1{\sim}2{\mu}m$ was fabricated utilizing the femtosecond laser pulses to induce the AIC process through the key holes and the prepared workpieces were annealed in a thermal chamber for 2 hours. After heat treatment, the surface morphology, grain size, and crystal orientation of the polycrystalline silicon (pc-Si) film were evaluated by scanning electron microscope, transmission electron microscope, and energy dispersive spectrometer. In conclusion, we observed that the vertical crystal growth was occurred in the case of the crystallization of a-Si with aluminum by the MIC process in a small area. The pc-Si grain grew under the key hole up to a size of $3{\sim}4{\mu}m$ with the workpiece.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.1
• /
• pp.36-41
• /
• 2017

The effects of $MgB_4$ addition on the superconducting properties and the microstructure of in situ processed $MgB_2$ bulk superconductors were studied. $MgB_4$ powder of 1-20 wt.% was mixed with (Mg + 2B) powder and then pressed into pellets. The pellets of (Mg + 2B + $xMgB_4$) were heat-treated at $650^{\circ}C$ for 1 h in flowing argon. The powder X-ray diffraction (XRD) analysis for the heat-treated samples showed that the major formed phase in all samples was $MgB_2$ and the minor phases were $MgB_4$ and MgO. The full width at half maximum (FWHM) values showed that the grain size of $MgB_2$ decreased as the amount of $MgB_4$ addition increased. $MgB_4$ particles included in a $MgB_2$ matrix is considered to suppress the grain growth of $MgB_2$. The onset temperatures ($T_{c,onset}$) of $MgB_2$ with $MgB_4$ addition (0-10 wt.%) was between 37-38 K. The 20 wt.% $MgB_4$ addition slightly reduced the $T_{c,onset}$ of $MgB_2$ to 36.5 K. This result indicates that $MgB_4$ addition did not influence the superconducting transition temperature ($T_c$) of $MgB_2$ significantly. On the other hand, the small additions of 1-5 wt.% $MgB_4$ increased the critical current density ($J_c$) of $MgB_2$. The $J_c$ enhancement by $MgB_4$ addition is attributed not only to the grain size refinement but also to the possible flux pinning of $MgB_4$ particles dispersed in a $MgB_2$ matrix.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.2
• /
• pp.33-42
• /
• 2012

The purpose of this study is to determine the effect of soil grain size and its distribution on soil-water characteristic. To do this, soil-water characteristic tests were conducted on Saemangeum silt using the axis translation technique. For comparison, the test was also conducted on Jumunjin sand. Using the test results, the soil-water characteristic curves (SWCCs) of Saemangeum silt and Jumunjin sand were predicted by Van Genuchten model. By comparison and analysis between two SWCCs, the silt shows higher values of matric suction, water content, and air entry value than the sand. On the other hand, the sand has higher values of Van Genuchten model parameters of ${\alpha}$, $n$, $m$ than the silt. It indicates that the SWCC is significantly dependent on the structure of soils. In other words, if a soil has relatively high grain size and poor grain size distribution curve, the values of saturated volumetric water content, residual volumetric water content, and air entry value are small, and the variation of volumetric water content is high in accordance with the matric suction variation, and consequently it shows a narrow range of funicular region.