• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.7-14
• /
• 1996

두께가 20mm와 30mm이고 폭이 40mm와 60mm 인 길이 600mm의 낙엽송 제재목에 응력파 시험과 휨강도 시험을 실시하였다. 모든 시험편은 생재 상태로 구입 후 함수율 약 13%로 조습 처리하여 응력파 시험과 휨강도 시험을 시행하였다. 휨 영계수와 휨강도는 두께가 큰 것이 작게 나타났다. 최상의 상관관계는 휨 영계수와 양 표면에서 구한 값의 평균값을 사용한 응력파 속도 및 영계수 사이에 나타났다. 휨 영계수와 관계에서 응력파 영계수는 응역파 속도 보다 더 확연한 옹이의 영향을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.90-100
• /
• 1996

두께가 20mm 와 30mm 이고, 폭이 40mm 와 60mm인 600mm 길이의 낙엽송 제재목에 응력파 시험을 실시하였다. 모든 시험편은 생재 상태로 구입 후 함수율 27%, 22%, 17%과 12%조건으로 조습 처리하였다. 함수율 변화에 따른 응력파 속도와 영계수를 구하기 위한 응력파 시험을 4종류의 함수율 조건에서 실시하였다. 응력파 속도와 응력파 시험으로부터 구한 영계수는 시편의 함수율, 치수, 그리고 시험편의 옹이와 옹이 주변 목리의 상호작용에 의해 영향을 받았다. 모든 함수율 및 각 함수율 조건에서 응력파 속도는 응력파에 의해 구한 영계수와 양호한 상관관계를 나타냈다. 응력파 속도와 응력파 시험으로 구한 영계수는 함수율이 증가할 때 비선형적으로 감소하였으나, 함수율 25% 이상에서는 응력파에 의해 구한 영계수의 변화가 거의 없었다.

• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.429-438
• /
• 2017

Monte Carlo N-Particle (MCNP) modeling algorithm based on the Monte Carlo method was used to perform the simulation of neutron logging in order to increase the reliability and utilization of neutron logs applied in geological and resource engineering fields. To perform the simulation using MCNP, we used a realistic three-dimensional configuration of neutron sonde and formation. Validation of the modeling was confirmed by comparing the calibration curves of sonde manufacture with those calculated by MCNP modeling. After the validation, lithology effects, pore fluid effects, borehole diameter change, casing effect, and effects of borehole water level were investigated through modeling experiments. Numerical tests indicate that changes in neutron count ratio according to the lithology were quantitatively understood. In case of a borehole with a diameter of 3 inches, ratio of counting rates was higher than expected to be interpreted as borehole fluid has small effects on neutron logging. Effect of casing was also small in general, particular when porosity increases. Since modeling results above the groundwater level showed a tendency opposite to those below the groundwater level, neutron logs can be used to detect groundwater level. The modeling results simulated in this study for various borehole environments are expected to be used for data processing and interpretation of neutron log.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.2
• /
• pp.160-171
• /
• 1995

The size characteristics of lead particle which is one of the important factors associated with absorption of lead were ignored in establishing lead standard. This study was conducted to investigate distribution of lead particles by operation of industry. Aerodynamic Mass Median Diameters (MMD) of airborne lead particles in the battery and litharge manufacturing industry were $14.1{\mu}m$ and $15.1{\mu}m$, respectively. There was no significant difference between those two values(p>0.05). However, the diameters in radiator manufacturing and secondary smelting industry were $1.3{\mu}m$, $4.9{\mu}m$, respectively. Those were significantly smaller than the particle sizes in other industries(p<0.05). Total lead concentrations in the secondary smelting industry were higher than those in the battery and litharge manufacturing industry. Total lead concentrations in other industries except radiator manufacturing industry exceeded the standard of $50{\mu}g/m^3$. Only radiator manufacturing industry indicated lead concentrations significantly lower than those in other industries(p<0.05). Concentrations of lead particles smaller than $1{\mu}m$ defined as respirable fraction by OSHA's CPA model assumption were $72.4{\mu}g/m^3$ in the secondary smelting industry, exceeding $50{\mu}g/m^3$. The relationship of concentrations between total lead and lead of particles smaller than $1{\mu}m$ was log Y = 0.46 logX + 0.06(n=119, $r^2=0.44$, p=0.0001). Relationship of respirable lead concentrations between OSHA and ACGIH was significantly detected in the litharge and battery manufacturing industry(p=0.0001), but was not significant in the radiator(p=0.2720) and secondary smelting manufacturing industry(p=0.2394). As MMDs of lead particles generated in industry were small, difference of respirable lead concentration between OSHA and ACGIH became smaller. There was a significant difference between concentrations respirable lead defined by two organizations such as OSHA and ACGIH in the battery and litharge manufacturing industry. Average concentration of respirable lead by ACGIH definition was 43.3 % of total lead in secondary smelting and 48.9 % in radiator manufacturing industry, and lower fractions were indicated in battery and litharge manufacturing industry. Relationships of total lead with IPM, TPM, and RPM were significant respectively(p=0.0001) and lead concentrations by particle size could be estimated using this relationship. Linear regression equation between total lead concentration(X) and ACGIH-RPM concentration(Y) was log Y = 0.76 log X - 0.40($r^2=0.89$, p=0.0001).

• Journal of Mushroom
• /
• v.15 no.2
• /
• pp.69-72
• /
• 2017

Diversification to develop oak pruned neck utilization technology reduction of operation cost of cheonma(Gastrodia elata) farmers is the purpose of this research, but the results of the experiment are as follows. The soil chemistry of the plantation was very weak in 2015 when the pH was 5.7, weakly acidic and EC was 0.41 (ds/m), but the faux spring area was very sunny, but at the end of May, early June, late July And so on were at a maximum temperature of $25^{\circ}C$ or more, and underground temperature fell below freezing in late January 2016. In the content of the survey of the harvested volume, treatment with a diameter of 6 to 10 cm appeared in 1,366 g total weight and in treated plots with a diameter of 20 cm or more, appeared in 1,542 g, confirming that the number and weight of the interspaces from the small neck is higher than the practice.

• Journal of the Korea Furniture Society
• /
• v.20 no.4
• /
• pp.281-289
• /
• 2009

This research examined the technical feasibility of composite that had two layers of fiberglass reinforcement to enhance the load carrying capacity of lumber. Specimens were prepared from standard lumber made of thinning crop trees such as Larix kaempferi, Pinus koraiensis, and P. rigida. Results indicated that bending properties, hardness, and wood screw withdrawal load of low density lumber from the P. koraiensis increased as the number of layers of fiberglass reinforcement increased. Composite produced by VARTM method showed the MOE increased in all specimens, while the MOR differed on the location, whether the 2-layers of FRP is put on tensile zone or compressive zone. The MOR of high density lumber from Larix kaempferi and P. rigida decreased when they placed into tensile zone, but low density lumber from P. koraiensis increased in same location. The bending toughness only increased high density lumber of Larix kaempferi as the number of layers of fiberglass reinforcement increased. The technique developed by this study may increase an opportunity to use small diameter log with low density for commercial purposes.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.3
• /
• pp.345-363
• /
• 2020

This study was conducted to identify the effect of kerfing and incising pretreatments on high-temperature drying characteristics of cedar and larch boxed-heart timbers with a cross section of less than 150 mm. The result showed that the pretreatments have made a significant difference regarding surface check and shrinkage. Although the kerfing was suitable as a pretreatment to reduce the occurrence of surface check, the incising was not suitable as a pretreatment since the knives of timber joined together, causing the conversion to the surface checks. The shrinkage showed a significant result that the final moisture content was reduced in the order of incising, kerfing, and kerfing-incising after the drying process based on the pretreatment condition. Twist was more affected by the grain angle than the anisotropy of the juvenile wood, and there was no effect of pretreatments.

• Journal of Korean Society of Forest Science
• /
• v.89 no.1
• /
• pp.126-134
• /
• 2000

The purpose of this study is to examine the status of supply-demand and procurement of the timber used for wooden cultural properties. Because people require the high quality pine timber with cultural assurance and public function for cultural properties, it is priced far higher than ordinary construction timber. The timber consumption was estimated at 18 thousand cubic meter in 1998, of which the large sized log(LSL) with the small end diameter over 30cm consisted of 35.5%, equivalent to 6,300 cubic meter. Majority of the timber was supplied from private forest located in Kangwon-do and national forest, accounting for 65.7% and 16.7%, respectively. Recently the supply more and more relied on timber logged in Kangwon-do. Owing to lack of domestic supply of LSL class timber, part of the volume has been substituted by import log. Most of carpenters working on cultural properties thought that supply of LSL timber would hardly meet the increasing demand for uses of wooden cultural properties. Finally, in order to uphold the tradition of wooden cultural properties, it is necessary to establish a forest management plan which aim at producing large size high quality pine timber.

• Annals of Surgical Treatment and Research
• /
• v.95 no.6
• /
• pp.303-311
• /
• 2018

Purpose: OncoHepa test is a multigene expression profile test developed for assessment of hepatocellular carcinoma (HCC) prognosis. Multiplication of ${\alpha}$-FP, des-${\gamma}$-carboxy prothrombin (DCP) and tumor volume (TV) gives the ${\alpha}$-FP-DCP-volume (ADV) score, which is also developed for assessment of HCC prognosis. Methods: The predictive powers of OncoHepa test and ADV score were validated in 35 patients who underwent curative hepatic resection for naïve solitary HCCs ${\leq}5cm$. Results: Median tumor diameter was 3.0 cm. Tumor recurrence and patient survival rates were 28.6% and 100% at 1 year, 48.6% and 82.9% at 3 years, and 54.3% and 71.4% at 5 years, respectively. The site of first tumor recurrence was the remnant liver in 18, lung in 1, and the peritoneum in 1. All patients with HCC recurrence received locoregional treatment. OncoHepa test showed marginal prognostic significance for tumor recurrence and patient survival. ADV score at 4log also showed marginal prognostic difference with respect to tumor recurrence and patient survival. Combination of these 2 tests resulted in greater prognostic significance for both tumor recurrence (P = 0.046) and patient survival (P = 0.048). Conclusion: Both OncoHepa test and ADV score have considerably strong prognostic power, thus individual and combined findings of OncoHepa test and ADV score will be helpful to guide postresection surveillance in patients with solitary HCCs ${\leq}5cm$.

• Journal of Korean Society of Forest Science
• /
• v.100 no.1
• /
• pp.52-61
• /
• 2011

Whereas recent researches have elucidated the positive ecological roles of large wood (LW) in fishbearing channels, LW is also recognized as a negative factor of log-laden debris flows and floods in densely populated areas. However in Republic of Korea, no study has investigated longitudinal variations of LW distribution and dynamic along the stream corridor. Hence to elucidate 1) physical factors controlling longitudinal distribution of LW and 2) their effect on variation in LW load amount, we surveyed the amount of LW with respect to channel morphology in a mountain stream, originated from Mt. Ki-ryong in Inje, Gangwondo. Model selection in the Generalized Linear Model procedure revealed that number of boulder (greater than or equal to 1.0 m in diameter), bankfull channel width and their interaction were the best predictors explaining LW load volume per unit channel segment area (unit LW load). In general, boulders scattered within small mountain streams influence LW retention as flow obstructions. However, in this study, we found that the effect of the boulders vary with the channel width; that is, whereas the unit LW load in the segment with narrow channel width increased continuously with increasing boulder number, it in the segment with wide channel width did not depend on the boulder number. This should be because that, in two channels having different widths, the rates of channel widths reduced by boulders are different although boulder numbers are same. Our findings on LW load varying with physical factors (i.e., interaction of boulder number and channel width) along the stream corridor suggest understanding for longitudinal continuum of hydrogeomorphic and ecologic characteristics in stream environments, and these should be carefully applied into the erosion control works for systematic watershed management and subsequent disaster prevention.