• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.1-4
• /
• 2007

The total Fluorine content in the precursor solution for MOD processing of YBCO coated conductors can be significantly reduced by synthesizing precursor solution with F-free Y & Cu precursor and Barium trifluoroacetate(TFA). It was shown that crack-free and uniform precursor films were formed after calcinations in humidified oxygen atmosphere. Less than 2 hours are required to finish the calcinations process and XRD measurement shows that $BaF_2,\;CuO,\;Y_2O_3$ are major constituent of calcined precursor films. Film thickness after calcinations was improved to be 2.8um by applying slot-die coating method. In particular, addition of Samarium shows critical current of $I_c=273A/cm-w(J_c=3.8MA/cm^2)$. It is shown that uniform and fast processing route to YBCO coated conductor with high Ic can be provided by employing F-free Y & Cu precursor solution in MOD process.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권4호
• /
• pp.16-18
• /
• 2007

We report the results of MOD-processed YBCO coated conductors on the IBAD-MgO template. The precursor solution was coated on the $CeO_2-buffered$ IBAD-MgO template using a slot-die coating method, calcined at a temperature of $550^{\circ}C$, and fired at high temperatures for 2.5 h in a reduced oxygen atmosphere. The $J_C$ value of YBCO coated conductors was found to be very sensitive to the microstructure, and thus higher $J_C$ value could be achieved when the in-plane texture was higher and the difference in $T_{C,zero}$. was negligible. Optimally processed YBCO coated conductor exhibited $J_C$ value of $0.75MA/cm^2$ at 77 K in self-field, which might be due to somewhat depressed $T_{C,zero}$ of 87.3 K caused by possible $Sm^{3+}$ substitution on the $Ba^{2+}$ site.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.178-183
• /
• 2022

For enhancing the flame-retardant properties of wallpapers, we developed an organic-inorganic hybrid solution with ZrSiO₄ as a functional ceramic powder, coated on non-woven fabric using dip coating, spray coating, and slot-die coating methods. Their flame retardant properties were characterized by a 45° combustion tester, which is manufactured according to the flame-retardant performance standard (KOFEIS 1001 and KS F 2819). In organic-inorganic hybrid solution, with increasing the concentration of acid-catalyst (acetic acid), the precipitation of ZrSiO₄ powders increased, and the flame retardant properties decreased. The highest flame retardant result was obtained for the solution adding 5 wt% acetic acid. The optimization of the coating method and coating number resulted in the most excellent flame-retardant properties being obtained for the non-woven fabric coated for 5 or 7 times by dip coating method, and their flame-retardant properties corresponded to class 2 flame-retardant performance of wallpapers.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권2호
• /
• pp.23-26
• /
• 2007

The influence of water partial pressure in Metal-organic Deposition (MOD) method was investigated on the texture and the morphology of $YBa_2Cu_3O_{7-x}$ (YBCO) films grown on the buffered metal tapes. The water partial pressure was varied from 4.2% up to 10.0% with the other process variables, such as annealing temperature and oxygen partial pressure, kept constant. In this work, the fluorine-free Y & Cu precursor solution added with Sm was synthesized and coated by the continuous slot-die coating & calcination step. The next annealing step of the YBCO films was done by the reel-to-reel method with the gas flowed vertically down. From the x-ray diffraction analysis, the un-reacted phase like $BaF_2$ peak was found at the water partial pressure of 4.2%, but $BaF_2$ peak intensity is much reduced as the water partial pressure is increased. However, the higher water partial pressure of about 10% in this experiment leads to the poor crystallinity of YBCO films. The morphologies of the YBCO films were not different from each other when the water partial pressure was varied in this work. The maximum critical current density of 3.8MA/$cm^2$ was obtained at the water partial pressure of 6.2% with the annealing temperature of 780$^{\circ}C$ and oxygen partial pressure of 500ppm.

• 한국산학기술학회논문지
• /
• 제19권3호
• /
• pp.14-20
• /
• 2018

전기자동차는 가솔린 자동차와는 달리 배출가스가 없어 친환경 차량을 대표하지만, 장착된 축전지에 충전된 전기로 구동되기 때문에, 1회 충전으로 갈 수 있는 거리가 전지의 에너지 밀도에 의해 좌우된다. 따라서 높은 에너지 밀도를 갖는 리튬이온 전지가 전기자동차용 전지로 유력한 후보이다. 리튬이온 전지의 효율을 지배하는 중요한 구성품은 전극이므로 전극 제조공정은 리튬이온 전지 전체 생산 공정에서 중요한 역할을 한다. 특히 전극의 제조 공정 중 코팅 공정은 성능에 큰 영향을 미치는 매우 중요한 공정이다. 본 논문에서는 전극 제조에서 코팅 공법의 효율성 및 생산성 증대를 위한 혁신적인 공정을 제안하고, 장비 설계 방법 및 개발 결과에 대하여 기술하였다. 구체적으로, 극판 핵심 코팅 품질 25% Upgrade 기술, 제품 고출력/고용량화 에 따른 조립 마진 감소 대응 가능 기술, 그리고 제품 용량 품질 및 조립 공정 수율 향상 기술들에 대한 설계 절차 및 개발방법을 제시하였다. 결과로 리튬이온 배터리의 셀의 제품 수명 개선 효과를 확보 하였다. 기존의 코팅 공정과 비교할 때 양극 용량 유지 위해 Target Loading Level 유지, 산포를 향상시켰다(${\pm}0.4{\rightarrow}{\pm}0.3mg/cm^2r$감소).