• 제목/요약/키워드: slope stabilization

검색결과 119건 처리시간 0.019초

시멘트 계 재료를 사용한 녹생토의 내구성 및 사면 안정성 평가 (Evaluation of Durability and Slope Stability of Green Soil using Cementitious Materials)

  • 김일순;최윤석;양은익
    • 한국산학기술학회논문지
    • /
    • 제19권5호
    • /
    • pp.45-53
    • /
    • 2018
  • 다양한 사면 안정 공법 중 식물의 생육을 기반으로 하는 녹생토 공법의 경우, 환경적인 측면에서는 유리하지만 급경사지나 암반 사면에 시공시 내구성 및 사면 안정성이 부족한 실정이다. 따라서 본 연구에서는 시멘트 계 재료를 사용하여 부착강도를 확보하고 ECG를 첨가하여 식생환경을 개선한 녹생토를 개발하였으며, 내구성 및 사면 안정성 등을 평가하여 암반 식생 기반재로서의 사용 가능성을 검토하였다. 실험 결과, 개발 녹생토의 점착력 및 내부 마찰각은 현장 녹화토 보다 높게 측정되어 현장 시공성에 문제가 없을 것으로 판단된다. 토양 경도는 26 mm 수준으로 식물의 가장 좋은 생육조건인 18~23 mm를 약간 상회하였으며, 건조수축은 약 3%의 수축률을 나타내어 녹생토의 내구성에 큰 영향을 주지 않을 것으로 판단된다. 사면 부착력을 평가하기 위한 강우강도 모사 실험 결과 모든 사면에서 붕괴는 발생하지 않았으며, 사면이 급경사일수록 강우에 의한 손상은 감소하는 것으로 나타났다. 따라서 본 연구에서 개발된 녹생토는 내구성 및 사면 안정성이 우수하여 암반 사면에 적용이 가능할 것으로 판단된다.

파쇄암반에 설계된 대규모 사면의 안정화 고찰 (A study for the stabilization of large scale rock slope designed in the fractured rock mass)

  • 홍예성;조태진;한공창
    • 한국암반공학회:학술대회논문집
    • /
    • 한국암반공학회 1996년도 정기총회 및 학술발표회
    • /
    • pp.55-72
    • /
    • 1996
  • 암반사면의 안정성은 암반내에 발달된 불연속면의 기하학적 속성과 강도정수에 크게 영향을 받으며, 사면방향에 대한 불연속면들의 상대적인 방향성들은 구조적으로 발생 가능한 붕괴양상을 결정하게 된다. 불연속면을 따라 미끄러짐이 발생하는 암반사면의 불안정성 분석에는 결정론적인 해석(deterministic analysis)과 확률론적인 해석(probabilistic analysis)들을 포함하여 수많은 방법들이 이용되고 있다. (중략)

  • PDF

식생뿌리에 의한 비탈면 안정과 보강에 관한 실험적 연구 (An Experimental Study on the Reinforcement and Stabilization of Slope by Vegetation Roots)

  • 조주형;안봉원
    • 한국환경복원기술학회지
    • /
    • 제1권1호
    • /
    • pp.54-62
    • /
    • 1998
  • This study measured the shearing resistance of the roots of the Sasamorpha purpurascens, Miscanthus sinensis, Lespedeza cyrtobotrya by the tensile strength gained through their individual tensile test for the Root Reinforcement Model. The results to have measured this stress by experiment are as follows. 1) The mean root diameter of the Lespedeza cyrtobotrya used for this experiment was 2.19mm and the mean tensile stress was calculated as $929.489kgf/cm^2$. As for the Sasamorpha purpurascens, its mean root diameter was 1.727mm, and the mean tensile stress was $292.069kgf/cm^2$. And as for the Miscanthus sinensis, its mean root diameter was 0.814mm, and the mean tensile stress was $696.947kgf/cm^2$. And so, it was grasped that Lespedeza cyrtobotrya was highest in tensile stress. 2) ${\Delta}Cr(kg/cm^2)$ of the shearing resistance calculated by estimating the areal ratio of roots at $10^{-3}$ is $1.069kg/cm^2$ in Lespedeza cyrtobotrya, $0.336kg/cm^2$ in Sasamorpha purpurascens, and $0.801kg/cm^2$ in Miscanthus sinensis. That is, Lespedeza cyrtobotrya has the highest shearing resistance. However, since a precise analysis of the controlled factors of the slope analyses are demanded for more accurate dynamic analyses, the future demands a study on this.

  • PDF

Study on collapse mechanism and treatment measures of portal slope of a high-speed railway tunnel

  • Guoping Hu;Yingzhi Xia;Lianggen Zhong;Xiaoxue Ruan;Hui Li
    • Geomechanics and Engineering
    • /
    • 제32권1호
    • /
    • pp.111-123
    • /
    • 2023
  • The slope of an open cut tunnel is located above the exit of the Leijia tunnel on the Changgan high-speed railway. During the excavation of the open cut tunnel foundation pit, the slope slipped twice, a large landslide of 92500 m3 formed. The landslide body and unstable slope body not only caused the foundation pit of the open cut tunnel to be buried and the anchor piles to be damaged but also directly threatened the operational safety of the later high-speed railway. Therefore, to study the stability change in the slope of the open cut tunnel under heavy rain and excavation conditions, a 3D numerical calculation model of the slope is carried out by Midas GTS software, the deformation mechanism is analyzed, anti-sliding measures are proposed, and the effectiveness of the anti-sliding measures is analyzed according to the field monitoring results. The results show that when rainfall occurs, rainwater collects in the open cut tunnel area, resulting in a transient saturation zone on the slope on the right side of the open cut tunnel, which reduces the shear strength of the slope soil; the excavation at the slope toe reduces the anti-sliding capacity of the slope toe. Under the combined action of excavation and rainfall, when the soil above the top of the anchor pile is excavated, two potential sliding surfaces are bounded by the top of the excavation area, and the shear outlet is located at the top of the anchor pile. After the excavation of the open cut tunnel, the potential sliding surface is mainly concentrated at the lower part of the downhill area, and the shear outlet moves down to the bottom of the open cut tunnel. Based on the deformation characteristics and the failure mechanism of the landslides, comprehensive control measures, including interim emergency mitigation measures and long-term mitigation measures, are proposed. The field monitoring results further verify the accuracy of the anti-sliding mechanism analysis and the effectiveness of anti-sliding measures.

Numerical study on the optimal position of a pile for stabilization purpose of a slope

  • Boulfoul, Khalifa;Hammoud, Farid;Abbeche, Khelifa
    • Geomechanics and Engineering
    • /
    • 제21권5호
    • /
    • pp.401-411
    • /
    • 2020
  • The paper describes the influence of pile reinforcement on the stability of the slope behaviour, and the exploitation of the results of in situ measurements will be conducted. In the second part, a 2D numerical modelling will be conducted by using the finite element code PLAXIS2D; in order to validate the proposed modelling approach by comparing the numerical results with the measurements results carried out on the slides studied; to study the effect of positioning of piles as a function of the shear parameters of the supported soil on the behaviour of the soil. For various shear strength of the soil a row of pile position is found, at which the piles offer the maximum contribution to slope stability. The position of piles is found to influence the safety factor in granular soil whereas it shows a slight influence on the safety factor in coherent soil. The results also indicate that the ideal position for such stabilizing piles is in the middle height of the slope. Comparison of results of present study with literature from publication: indicated that to reach the maximum stability of slope, the pile must be installed with Lx/L ratio (0.37 to 0.62) and the inclination must be between 30° to 60°. Even, after a certain length of the pile, the increasing will be useless. The application of the present approach to such a problem is located at the section of PK 210+480 to 210+800 of the Algerian East-West Highway.

교대기호말뚝의 안정 (The Stability of Foundation Piles for Abutment)

  • 홍원표;안종필
    • 한국지반공학회지:지반
    • /
    • 제7권2호
    • /
    • pp.67-82
    • /
    • 1991
  • 불안정한 요반지반에 기초말뚝을 사용하여 교대를 축조할 경우 뒤채움에 의한 편재하중으로 인하 여 기초말뚝과 교대 에 수평변위가 발생되는 경우가 종종 발생되고 있다. 이 경우 교대 배면의 뒤 채움 은 하부 원지반에 편재하중을 작용시키게 되므로 결국 하부지반이 연약할 경우 측방유동이 발생되게 되며 기초말뚝은 측방유동으로 인하여 유발되는 측방토압을 받게 된다. 그러나 한편으로는 이들 기초말뚝은 지반의 측방유동에 저항하여 사면의 안전성을 증대시키는데 기여하기도 한다. 이러한 줄말뚝이 설치된 사면의 안정문제는 지반과 말뚝의 상호작용의 문제로 기초말뚝의 안정과 사면안정의 두가지 해석이 모두 실시되어야 한다. 결국 기초말뚝을 사용한 교대의 전체의 안정은 사면과 말뚝모두의 안정이 확보되었을때만가능한것이다. 본 연구에서는 이러한 측방유동이 발생될 가능성이 있는 사면지반에 말뚝을 일정간격으로 설치한 위에 교대가 설치되어 있는 경우의 합리적 해석법을 확립시켰다. 이 해석법을 한 해석예에 적용하여 검토한 결과 교대의 안정 에 영향을 미치는 여러 요소를 조사하였다. 특히 편재하중으로 인한 지반의 측방유동으로 수평변위의 피해를 받는 교대 기초말뚝의 구속상태에 대한 규명을 할 수 있었다.

  • PDF

시공 중 비탈면의 붕괴 특성에 대한 충청지역 사례연구 (A Case Study on Collapse Characteristics of Slope during Construction in the Chung-Cheong Area)

  • 이준대;배우석
    • 한국지반환경공학회 논문집
    • /
    • 제16권10호
    • /
    • pp.23-32
    • /
    • 2015
  • 비탈면 붕괴와 관련된 대부분의 연구는 안정화되어 공용 중인 사면에서 발생되는 붕괴사례를 중심으로 이루어져 왔으며, 안정화가 이루어지지 않은 시공 중에 발생되는 비탈면의 붕괴특성에 대한 연구는 많지 않다. 따라서 본 연구에서는 충청지역을 대상으로 시공 중 또는 시공 직후의 비탈면에서 붕괴가 발생된 79개소를 대상으로 정밀조사를 수행하고 그 결과를 통해 기하학적인 특성과 파괴특성, 설계 및 보강방법 등의 특성을 평가하였다. 분석결과 충북권은 평면형 붕괴와 표층 붕락이 두드러지며, 충남권은 평면형 붕괴가 대다수이나 충북권에 비해 퇴적암의 표층부 붕락이나 유실이 큰 것으로 나타났다. 또한 주된 파괴인자는 충북권이 절리의 교호(53%)와 풍화(25%)로 나타났고 다방향 절리로 인한 블록화와 천매암 지역의 엽리가 영향을 미치고 있으며, 충남권도 발달된 절리(55%)가 주요요인이나 단층, 탄질셰일 등 퇴적암의 지질학적 성인(36%)도 상당한 영향을 미치고 있어 지질학적, 기후적, 환경적 특성이 비탈면의 안정에 영향을 미치는 것으로 분석되었다.

Small- and large-scale analysis of bearing capacity and load-settlement behavior of rock-soil slopes reinforced with geogrid-box method

  • Moradi, Gholam;Abdolmaleki, Arvin;Soltani, Parham
    • Geomechanics and Engineering
    • /
    • 제18권3호
    • /
    • pp.315-328
    • /
    • 2019
  • This paper presents an investigation on bearing capacity, load-settlement behavior and safety factor of rock-soil slopes reinforced using geogrid-box method (GBM). To this end, small-scale laboratory studies were carried out to study the load-settlement response of a circular footing resting on unreinforced and reinforced rock-soil slopes. Several parameters including unit weight of rock-soil materials (loose- and dense-packing modes), slope height, location of footing relative to the slope crest, and geogrid tensile strength were studied. A series of finite element analysis were conducted using ABAQUS software to predict the bearing capacity behavior of slopes. Limit equilibrium and finite element analysis were also performed using commercially available software SLIDE and ABAQUS, respectively to calculate the safety factor. It was found that stabilization of rock-soil slopes using GBM significantly improves the bearing capacity and settlement behavior of slopes. It was established that, the displacement contours in the dense-packing mode distribute in a broader and deeper area as compared with the loose-packing mode, which results in higher ultimate bearing load. Moreover, it was found that in the loose-packing mode an increase in the vertical pressure load is accompanied with an increase in the soil settlement, while in the dense-packing mode the load-settlement curves show a pronounced peak. Comparison of bearing capacity ratios for the dense- and loose-packing modes demonstrated that the maximum benefit of GBM is achieved for rock-soil slopes in loose-packing mode. It was also found that by increasing the slope height, both the initial stiffness and the bearing load decreases. The results indicated a significant increase in the ultimate bearing load as the distance of the footing to the slope crest increases. For all the cases, a good agreement between the laboratory and numerical results was observed.

강성 쏘일네일 보강 사면의 전단저항 효과 (The Effect of Shear Resistance in Rigid Soil-nailed Slope System)

  • 권영기;정상섬
    • 대한토목학회논문집
    • /
    • 제29권6C호
    • /
    • pp.295-301
    • /
    • 2009
  • 쏘일네일을 이용한 사면 보강 시 그 보강 효과를 검토하는데 있어서 네일의 전단력은 무시하고 인발에 대한 저항력만 고려하여 보수적으로 설계를 하는 것이 일반적이다. 이는 연성거동을 하는 이형철근이 네일의 주된 재료가 되기 때문인데 강성거동을 하는 강관을 네일의 재료로 하였을 경우, 인발에 대한 저항력 외에도 파괴면에서의 전단저항력이 크게 작용할 것이다. 따라서 본 연구에서는 전단강도감소기법을 이용하여 보강재로 보강된 균질한 사면을 대상으로 강관과 이형철근의 네일 적용시 그 보강 효과를 검토하였다. 각 조건에서 수치해석을 실시하여 안전율과 네일 부재에 작용하는 힘을 통하여 네일의 전단력이 안전율에 미치는 영향을 검토하였으며, 네일 개수를 변화시켜가며 여러 경우에 대한 일반적인 경향도 분석하였다. 본 연구 결과 네일의 보강재 거동시, 네일의 전단력이 인발저항력에 비해 상대적으로 미치는 효과는 강관이 이형철근보다 전단저항력이 크게 작용하는 것을 확인하였으며 이에 따라 강관의 안전율이 보다 큰 것으로 나타났다.

난지도 안정화공사 이후 생태계 복원을 위한 현존식생에 관한 연구 (A Study on the Actual Vegetation of Nanji-do for Restoration of Ecosystem after Stabilization Construction)

  • 이경재;오충현;김지석
    • 한국환경생태학회지
    • /
    • 제11권1호
    • /
    • pp.126-132
    • /
    • 1997
  • 난지도는 서울외곽의 한강변에 위치한 면적 272ha인 섬으로, 1978년부터 1993년까지 약 15년간 서울지역에서 발생하는 각종 쓰레기 92,000,000m$^{2}$를 매립한 곳이다. 1996년 10월 현재 난지도의 현존식생면적은 191ha로서 이중 목본식물은 31ha이고 나머지는 초본식물이 우점종인 군락이었다. 목본식물 면적 중 아까시나무와 능수버들은 전체의 83%를 차지하고 있었다. 토양은 서울지역의 일반적인 토양이 산성으로 나타나는 것과는 달리 알카리성이며, 토양과 현존식생분포사이의 상관관계는 없는 것으로 나타났다. 연구 결과 난지도의 현존식생은 난지도 토양 안정화공사 이후의 식생목원지침 마련에는 도움이 되지 않을 것으로 나타났으므로 앞으로의 생태계 복원을 위해서는 다음과 같은 시도가 있어야 할 것이다. 첫째, 다양한 선구수종, 자생수종, 식이식물의 활착실험을 통해 난지도에 적합한 수종 선발. 둘째, 자생수종을 활용한 사면안정 공법의 개발 및 지역 특성에 적합한 식재계획 마련. 셋째, 동물 생태계 조사를 통한 동물생태계 복원계획 수립

  • PDF