• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.197-204
• /
• 1993

Pipe drainage is one of the effective slope protein works that can be adopted practically. As fine soil particles are suspended in percolating water, the strainer structure of under drain pipes in necessary to prevent the immediate clogging by soil suspension flow. This study deals with the effective strainer structure of under drain pipes for slope protection. The effective strainer structure of under pipes is the funneled strainer in which pore radius is enlarged toward flow direction. It is designed from the rheological properties of soil suspension flow which prevents the immediate clogging. Experimental results showed that the pipe drain discharge through the funneled strainers was larger than that through the constant pore radius strainers. This theorectial and experimental results indicate that the strainer with enlarged pore radius toward flow direction, is more effective than the strainer with constant pore radius.

• Journal of Forest and Environmental Science
• /
• 제16권1호
• /
• pp.17-33
• /
• 2000

강릉시 시범 공설묘지 조성사업은 경사 $30^{\circ}$의 표고차가 심한 산지를 절 성토하여 계단식 묘역단을 조성하는 공사로 수직고 15m 이상의 대절토 및 성토부가 산재하고 있다. 특히 묘역단장후 주변 유입수 및 표면 유출수에 의한 비탈면 붕괴, 묘역단 유실 등의 피해가 발생할 경우 보수 또는 보강이 사실상 어려운 실정이며, 사회적 여론으로 확대될 가능성이 크므로 비탈면 보호에 필요한 녹화공법을 검토하였다. 구체적인 연구내용으로는 설계도면 및 현장답사를 통한 문제 비탈면 추출, 비탈면의 물리적 특성과 식생의 생육상황 파악, 비탈면 주변부의 식생조사와 유용식생 선발, 비탈면의 토양조건 분석 및 비탈면 토사의 기본불성 조사 등이며, 이를 기초로 하여 비탈면 현황 및 문제점을 파악하고, 그 대안을 제시하였다.

• 한국농공학회논문집
• /
• 제46권5호
• /
• pp.117-127
• /
• 2004

A risk analysis on the cutting slope of roads near Cheongju area was carried out with the data from geological map, field investigation, and laboratory test and with the Geographic Information System. A risk analysis method on the cutting slope of road using the Geographic Information System was developed with the data from geological map, field investigation and laboratory tests. In the GIS, road factors which are safety factor, class of road, slake index, slope-protection works, and height of slope in the cutting slopes are classified into some ranks, and their weighting factors were taken into account. This method can be applied effectively to a road management.

• 한국환경복원기술학회지
• /
• 제8권2호
• /
• pp.83-89
• /
• 2005

The historical changes of seeding work in Japan, the typical slope revegetation method, is possible to divide into five periods as follows; 1) The early period after creation(1927-1948) 2) The spreading period of modern revegetation work with manpower(1947-1958) 3) The spreading period of rapid revegetation technique using exotic grasses with machineries(1959-1985${\dots}$) 4) The spreading period of rapid reforestation technique by fast growing species mainly using leguminous shrub species(1986-1995${\dots}$) 5)The developing period of nature restoration technique using endemic arborous species(1996-) The evaluation basis of vegetated condition after slope seeding has been described to a official guide book, "The Standards of Slope Stabilizing Works" It was mainly revised three times after first edition in 1972, and also the point of evaluation basis changed from the vegetation coverage to the density of woody plant through the 3rd period and the 4th period Recently main purpose of slope seeding has been developing from the erosion protection to the nature restoration in the current of the 5th period, and "The tentative guidelines of slope nature restoration" was announced by The Slope Revegetation Section of Japanese Society of Revegetation Technology in 2004. It was proposed the planning techniques of using suitable seeds/plants based on the preservation level at the real each construction sites Consequently, at present the importance of advanced monitoring methods for vegetation maintenance and plant sociologic survey to evaluate the plant succession is increasing.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.404-409
• /
• 2005

The reinforced concrete blocks for reinforced earth layer are combined with soil structures consisted of facing unit, reinforcing materials and soil. Those environmentally friendly facing units of reinforced concrete blocks are made of mine waste and tailing and that will be played a role of the effects of recycling use of wasted resources. The block are consisted of three types as curved or straight in order to control topography. The systems are also not limited to wall hight so that they are effectively used for protecting the slope of banking and cutting of earth works. The reinforced concrete blocks developed this time will be effectively applied for not only retaining wall, road, park, golf course, public office building constructions but also protecting of slope stabilization projects.

• Structural Engineering and Mechanics
• /
• 제89권3호
• /
• pp.253-263
• /
• 2024

Slope stability is generally paid more attention to in slope protection works, especially for slope containing weak layers. Two indexes of safety factor and failure model are selected to perform slope stability. Moreover, the finite element limit analysis method comprehensively combines the advantage of the limit analysis method and the finite element method obtaining the upper and lower bounds of the safety factor and the failure mode under the slope stability limit state. In this study, taking a waste dump containing a weak layer as an engineering background, the finite element limit analysis method is adopted to explore the potential failure mode. Meanwhile, the sensitivity analysis of slope stability is performed on geometrical and geotechnical parameters of the waste dump. The results show that the failure mode of the waste dump slope is two wedges if the weak layer is located on the ground surface (Model A), while the slope can be observed as three wedges failure if the weak layer is below the ground surface (Model B). In addition, both failure modes are highly sensitive to the friction angle of the weak layer and the shear strength of waste disposal, and moderately sensitive to the heap height, the dip angle and cohesion of the weak layer, while the toe cutting has limited effect on the slope stability. Moreover, the sensitivity to the excavation of the ground depends on the location of the weak layer and failure mode.

• 한국환경복원기술학회지
• /
• 제4권2호
• /
• pp.26-35
• /
• 2001

We are, now in the 21st century, that environmental preservation and the campaign for bio-diversity protection are very important issues the government must deal with as nation's main policy. To make road and building construction, housing land service, construction of golf fields, and various development works, we have made artificial topographical alterations and as a result, the cut-slop has been increased. However, without the proper study and clear planning, revegetation for the stability of the cut-slop has worked out. These efforts now are causing derangement of an ecosystem and spoiling the nature without considering for ecological adaptation. Therefore, we are going to find out the Revegetation Method to Cut-Slopes considering both the ecological adaptation and harmony with the nature.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.910-920
• /
• 2008

In Korea, more than 70% of the territory consists of mountains. Therefore, the construction of roads and railways has generally involved with a steep rock slope in which the event of rockfalls are often occurred due to the weathered rock conditions and rainfalls etc. This is dangerous when the rock falls into the road and railway on which vehicles and trains are running. In order to prevent such rockfalls, the rockfall protection fence consisting of post, wire rope, and PVC coating steel net has most used at the bottom of rock slopes. In a general practice, an absorbing rockfall energy, 50kJ is specified by the Ministry of Construction and Transportation. However, questions still remain about whether the rockfall protection fence works effectively or not. In this study, a typical wire rope used in the standard rockfall protection fence was replaced by the high carbon steel wire rod and to validate its capacity of rockfall energy absorbing the field rockfall tests were conducted. The testing results show that a new rockfall protection fence using the high carbon steel wire rods can absorb the rockfall energy more than 50kJ and 20% of construction cost was saved in comparison with the previous rockfall protection fence.

• 한국화재소방학회논문지
• /
• 제21권1호
• /
• pp.98-105
• /
• 2007

본 연구에서는 소방 건축분야에 가장 많이 사용되는 배관인 배관용 탄소강관 및 이에 상응하는 스테인리스 강관을 분기배관으로 제작이 가능한지 여부를 상용유한요소프로그램(ABAQUS)을 이용하여 확인하였다. 이러한 배관을 분기배관으로 성형할 경우 심이 없는 배관 사용을 원칙으로 하고 배관에 심이 있는 경우 심과 정반대방향을 성형면으로 하여야 한다. 배관의 성형시 플러그의 경사면과 길이가 성형에 가장 큰 영향을 미치는 요소임을 알 수 있었다. 분기배관의 성형해석결과를 토대로 분기부분의 최소 높이와 두께를 제안했다.

• Journal of Forest and Environmental Science
• /
• 제23권1호
• /
• pp.21-28
• /
• 2007

본 연구는 환경친화적 녹색임도 구현을 위해 1990년부터 2003년까지 시공된 충청남도 민유임도의 임도설계서를 검토하여 적용공종의 변화를 분석하고 평가하였다. 임도사업비의 변화추이는 사업연도에 따라 꾸준히 증가되었고 특히 환경친화적 녹색임도 구현을 위한 임도정책이 수립된 1999년과 2000년도에 사업비가 대폭 증가한 것으로 나타나 비교적 견실한 임도시공이 이루어질 수 있는 기반이 조성된 것으로 판단된다. 또한 토공사업의 비욜은 1999년 약 25.4%에서 2000년부터 2003년까지 토공사업비 평균비율이 18.5%로 감소된 것으로 나타났다. 하지만 토공의 비율이 줄어든 것과는 달리 비탈면보호공이나 구조물공의 총액은 상승하였으나 비율은 거의 증가하지 않은 것으로 나타났다. 이는 적용 구조물의 규격확대와 적용 물량의 증가에 따른 자재대의 비율과 제경비의 상승에 기인한 것으로 구조물공과 비탈면보호공에 소요되는 재료가 증가한 것으로 판단할 수 있다. 향후 공사비의 증가가 적용 구조물의 규격확대와 투입량 증가만으로 이어질 경우 임도시공 노하우와 경쟁력 약화를 초래할 수 있으므로 보다 다양한 공법의 적용과 개발노력이 요구된다.