• The Korean Journal of Ecology
• /
• v.15 no.3
• /
• pp.209-220
• /
• 1992

We investigated major plant communities and seed dispersal patterns in areas a(alt. 2,263 ~2,350m),b(alt. 2,350~2,420m), c(alt. 2,420m) with levels of a crater on mt. paektu. Thirty two species distributed around chunji consisted of 24 perennial herbs, 1 biennial herb and 7 alpine dwarf shurbs. Their fruit types were quite diverse; capsule(11), achene(10), grain(4), legume(2), follicle(2), schizocarp(2) and drupe(1). in area a, adjancent to the chunji(lake) water surface, gramineae sp., cyperaceae sp., chrysanthemum zawadskii and bistorta ochotensis were occured as members of the major plant communities. Species of gramineae and cyperaceae seem to have become dominant because their seeds float well. Astragalus membranaceus is legume and endures the winter cold and summer drought. in area c, alpine dwarf shrubs (e. g.rhododendron redowskianum, rhododendron aureum, empetrum nigrum) were dominant. In area c, compared to a and b, the weather is drier because of strong wind and lower water holding capacity of the soil. Therefore the pattern of plants distributing around chunji is different from that in western slope on mt.paektu. environmental factor such as wind, temperature and water may contribute to the pattern.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.187-192
• /
• 1998

Generally the solidified microstructures of materials consist of the columnar and equiaxed dendritic regions, and many theoretical studies about columnar-to-equiaxed transition have been done because that is closely related to the mechanical and physical properties of products. In this study, the modified equation based on the Hunt's analytical columnar-to-equiaxed transition condition which was derived from heterogeneous nucleation and grain growth in front of the columnar dendrite tip under directional solidification, was obtained applying the growth-velocity-dependent distribution coefficient and liquidus slope to Hunt's. The effects of the number of nucleation sites, nucleation temperature, alloy composition, growth velocity and liquid temperature gradient on the transition for Al-Cu alloys have been investigated.

• Economic and Environmental Geology
• /
• v.47 no.5
• /
• pp.533-540
• /
• 2014

The Wangdol-cho area, in the Hupo Bank, plays a very important role in main fishing grounds, leisure tourism and marine environmental researches of the East Sea. We analyzed the detailed bathymetry and classified the seabed characteristics of the Wangdol-cho area, based on seafloor backscattering images and sediment grain size. The Hupo Bank is developed in parallel with the eastern coastal line of Korean peninsula, and the shallowest area (Wangdol-cho) of the Hupo Bank is located along the eastern part of Hupo Port. The Wangdol-cho comprises three summits; north summit, middle summit, and south summit. The middle summit area among the three summits has the most shallow water depth with minimum about 6 m. The north summit shows about 8 m minimum depth and the south summit about 9 m. The bathymetry data around three summits represent undulating seabeds with many scattered underwater reefs and shallow water depth. The area between the underwater reefs, the flat seafloor in the northeastern part of the survey site, and the western steep slope area have relatively coarse sediments such as sandy gravel and gravelly sand. The bathymetry in the western side of the Wangdol-cho shows steep slope seabed, extending to the Hupo Basin. Fine sediments including mud and silty sand occur in the Hupo Basin area of the survey site. The submarine detailed topography and the analysis of the seafloor characteristics of the survey area are expected to contribute to management for marine environmental researches and sustainable use of ecosystems in the Wangdol-cho.

• Bulletin of the Korean Chemical Society
• /
• v.2 no.3
• /
• pp.96-104
• /
• 1981

(1) The flow data of f (stress) and ${\dot{s}$ (strain rate) for Fe and Ti alloys were plotted in the form of f vs. -ln ${\dot{s}$ by using the literature values. (2) The plot showed two distinct patterns A and B; Pattern A is a straight line with a negative slope, and Pattern B is a curve of concave upward. (3) According to Kim and Ree's generalized theory of plastic deformation, pattern A & B belong to Case 1 and 2, respectively; in Case 1, only one kind of flow units acts in the deformation, and in Case 2, two kinds flow units act, and stress is expressed by $f={X_1f_1}+{X_2f_2}$where $f_1\;and\;f_2$ are the stresses acting on the flow units of kind 1 and 2, respectively, and $X_1,\;X_2$ are the fractions of the surface area occupied by the two kinds of flow units; $f_j=(1/{\alpha}_j) sinh^{-1}\;{\beta}_j{{\dot{s}}\;(j=1\;or\;2)$, where $1/{\alpha}_j\;and\;{\beta}_j$ are proportional to the shear modulus and relaxation time, respectively. (4) We found that grain-boundary flow units only act in the deformation of Fe and Ti alloys whereas dislocation flow units do not show any appreciable contribution. (5) The deformations of Fe and Ti alloys belong generally to pattern A (Case 1) and B (Case 2), respectively. (6) By applying the equations, f=$(1/{\alpha}_{g1}) sinh^-1({\beta}_{g1}{\dot{s}}$) and $f=(X_{g1}/{\alpha}_{g1})sinh^{-1}({\beta}_{g1}{\dot{s}})+ (X_{g2}/{\alpha}_{g2})\;shih^{-1}({\beta}_{g2}{\dot{s}})$ to the flow data of Fe and Ti alloys, the parametric values of $x_{gj}/{\alpha}_{gj}\;and\;{\beta}_{gs}(j=1\;or\;2)$ were determined, here the subscript g signifies a grain-boundary flow unit. (7) From the values of ($({\beta}_gj)^{-1}$) at different temperatures, the activation enthalpy ${\Delta}H_{gj}^{\neq}$ of deformation due to flow unit gj was determined, ($({\beta}_gj)^{-1}$) being proportional to , the jumping frequency (the rate constant) of flow unit gj. The ${\Delta}H_{gj}\;^{\neq}$ agreed very well with ${\Delta}H_{gj}\;^{\neq}$ (self-diff) of the element j whose diffusion in the sample is a critical step for the deformation as proposed by Kim-Ree's theory (Refer to Tables 3 and 4). (8) The fact, ${\Delta}H_{gj}\;^{\neq}={\Delta}H_{j}\;^{\neq}$ (self-diff), justifies the Kim-Ree theory and their method for determining activation enthalpies for deformation. (9) A linear relation between ${\beta}^{-1}$ and carbon content [C] in hot-rolled steel was observed, i.e., In ${\beta}^{-1}$ = -50.2 [C] - 40.3. This equation explains very well the experimental facts observed with regard to the deformation of hot-rolled steel..

• The Korean Journal of Quaternary Research
• /
• v.5 no.1
• /
• pp.15-31
• /
• 1991

A total of 90 surface sediment samples, collected from the continental margin area bordering east and southeast coast of Korea, were subject to the geochemical analyses with the aim of filling the gap in our knowledge of this environment. The analyzed items included the major elements (Al, Fe, Mg, Ca, K, Na, p and Mn), organic carbon, and some trace metals (Ba, Co, Cu, Sr and Zn). The sediment grain-size exerted a predominant influence on the contents of most elements, with the exceptions of Ca, K, Sr and Ba. The Ca and Sr contents, being closely interrelated each other, were mainly controlled by the calcium carbonate content. The K content, on the other hand, appeared to be influenced by both illite and feldspar. The Ba content showed a certain relationship with that of K, suggesting a common source of these two elements; potassium feldspar. The R-mode factor analysis result also reaffirmed the above-mentioned controlling factors on the sediment geochemistry. The grain-size dependency of trace metals obscures their areal distribution pattern from the total contents. However, with the metal/aluminum ratios we could differentiate the subtle difference in the metal enrichment. Hence, sediments of the southern coastal area appear to receive some anthropogenic inputs of metals, though the effect is still negligible.

• The Journal of the Petrological Society of Korea
• /
• v.19 no.4
• /
• pp.283-292
• /
• 2010

The Suljeongri east three-story stone pagoda in Changnyeong (National Treasure No. 34) has been damaged mainly by lots of cracks. The stones used for this pagoda are medium-granied equigranular pinkish biotite granite. Measured magnetic susceptibility values are of from 2 to 9 (${\times}10^{-3}$ SI unit). From the ${\gamma}$-ray spectrometer mesurement K, eU, and eTh contents of the stones are 3 to 7%, 8 to 19 ppm, and 11 to 35 ppm, respectively. Comparing the petrographical and chemical characteristics between the stones of the pagoda and the country rocks near Suljeongri, it is suggested that the most similar rock could be equigranular biotite granite in the western slope of the Mt. Hwawangsan. Vertical, horizontal and diagonal cracks are intensely developed at the lower part of the stone pagoda. Biotite granite has intrinsic microcracks defined as rift and grain rock cleavages. Both rock cleavages are assumed to have led to the crack growth and consequent mechanical damage of the pagoda. It seems that vertical cracks have been grown parallel to the principal compressional stress, and that horizontal cracks to the reacting tensional stress. Diagonal cracks seems likely to have been resulted from conjugate rift and grain rock cleavages.

• Journal of the Korean Geographical Society
• /
• v.44 no.4
• /
• pp.463-480
• /
• 2009

The weathering properties and provenance of loess-paleosol sequence deposited on gravel layer of river terrace in Bongdong-eup, Wangju-gun, Jeonbuk Province are examined using soil analysis, magnetic susceptibility measurement, grain size and element analysis. The Bongdong section consists of, from top to bottom, Layer 1(paleosol), Layer 2(loess), Layer 3(paleosol) and the gravel layer of river terrace. The magnetic susceptibility values show the systematic variations in the sequence and the results of grain size analysis reveal that the sequence was deposited by not fluvial or slope process, but eolian process, and that contains finer materials than the Daecheon loess and Chinese Loess Plateau. Among the results of soil analysis, organic contents indicate systematic variations similar to the magnetic susceptibility. The wet soil colors further reflect the characteristics of the sequence rather than the dry soil colors. Based on the analytical results of major and rare earth elements, the eolian materials contained in the sequence were deposited by the materials originated from the areas where the Chinese Loess Plateau has been originated or the reworked materials from the Chinese Loess Plateau, and after the depositions, the materials experienced the intensive chemical weathering under the humid-warm climatic conditions in the Korean Peninsula.

• Journal of The Geomorphological Association of Korea
• /
• v.17 no.2
• /
• pp.63-76
• /
• 2010

The Jangdo wetland is located on a very gentle slope of the mountain area in Daejangdo island, Shinan-gun, Korea, in which the area of the watershed is estimated at 147,000 m². The wetland has been regarded as a peat bog without any sedimentological evidence. This study was conducted to analyze the geomorphological and sedimentological characteristics of the wetland. The geographic information system (GIS) was used to analyze the drainage system, and field surveys were conducted to measure the range and depth of wetland deposits. The grain size analysis, organic matter determination, elements analysis and radiocarbon dating were performed on samples from the wetland. As a result, the wetland deposits were about 30 cm deep on average, the mean grain sizes ranged from 50 to 500 μm, and the average C/N ratio was 11.5. The portion of organic matter it contained was only 5~26%, which did not satisfy the peat standards. The radiocarbon ages from the wetland deposits range 180±50 ¹⁴C yr BP to modern, which indicated that natural and anthropogenic interferences including agricultural activities have continuously happened. We conclude that the Jangdo wetland is still in its infancy, not a steady state, so that it could be very sensitive to a small disturbance.

• Journal of the Korean earth science society
• /
• v.40 no.1
• /
• pp.37-45
• /
• 2019

In spite of continued nourishments, Haeundae Beach in Busan has been suffering from erosion, this being caused by the increased wave energy due to global warming and intermittent typhoon reported by previous works. In the meantime, the typhoon Chaba hit Basan in October 2016. In order to investigate the effects of the typhoon in beach erosion and how fast the beach recovered after the typhoon, repeated beach profiling using a VRS-GPS system was carried out, and the grain size analyses for surface sediments sampled on the beach were conducted. Immediately after the typhoon invasion, Haeundae beach was eroded by 1.4 m in average height. The mean high tide lines were retreated back by 12 m, and beach slope became gentler from $3.8^{\circ}$ to $1.7^{\circ}$. The mean grain sizes of surface sediments became coarser from $1.6{\Phi}$ to $1.2{\Phi}$ after two months, and the sorting well sorted. After two months of typhoon landfall, the mean high tide lines have recovered by 85%, and the beach topography almost recovered. This suggests that the impact of typhoons on Haeundae beach erosion is negligible, and the relaxation time is shorter than that of other beaches.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.6
• /
• pp.57-66
• /
• 2004

To study the efficient usage of small diameter logs and woods containing defects such as knots, slope of the grain and decay, six types of finger-jointed woods with various finger profiles were made of poplar, pine and oak with different density. We investigated the effect of finger profile on static bending strength performances of finger-jointed woods. The efficiency of bending MOE, MOR and deflection showed the highest value in poplar finger-jointed wood with the lowest density of three species, and the lowest value in oak finger-jointed wood with the highest density of three species. The values markedly decreased with increasing finger pitch for finger-jointed wood glued with polyvinyl acetate (PVAc) resin for all tested species, whereas for the finger-jointed wood glued with resorcinol-phenol formaldehyde (RPF) resin, the influence of finger pitch on the efficiency of MOE was not found in all tested species, and those on the efficiency of MOR and deflection indicated the same trend as finger-jointed wood glued with PVAc resin in the case of pine and oak finger-jointed wood with higher densities. It was found that the values tended to decrease with increasing density of species on the whole and the desirable finger pitches were L (6.8 mm) for poplar, M (4.4 mm) for pine and S (3.5 mm) for oak in a view of economy. For finger-jointed wood glued with PVAc resin, the fitness between a tip and a root width of a pair of fingers δ of 0.5 mm indicated the highest efficiency of MOE for all species. And, the influence of δ on MOR was only found in oak finger-jointed wood glued with RPF resin and the desirable δ value for oak was 0.1 mm. However, it was found that the influence of δ on the strength performance was very small.