A 200-W continuous-wave thulium-doped all-fiber laser at 2050 nm was developed with a master oscillator power amplifier configuration. For the master oscillator, a single-mode thulium-doped fiber laser was built with fiber Bragg gratings. The operating power of the oscillator was 10.1 W at a pump power of 20.9 W, and the slope efficiency was measured to be 53.0%. All emitted wavelengths of the oscillator were located between 2049.2 nm and 2049.9 nm, and no other peaks in different wavelength ranges were observed. The maximum output power of the final amplified beam was 204.6 W at a pump power of 350.4 W. The slope efficiency of the amplifier was measured to be 58.4%.
광 편향기가 집적된 레이저 다이오드를 제작하고 편향기 주입전류에 따른 레이저 다이오드의 특성 변화 및 출력광의 편향을 조사하였다. 레이저 다이오드와 집적된 수동 도파로의 상부 클래드 층의 일부분에 광 편향기를 집적하고, 편향기의 전류 주입에 따른 굴절률 변화를 유도하여 출력광의 편향이 발생하도록 하였다. 편향기의 전류 주입에 따른 출력광의 특성변화를 조사하기 위하여 편향기 주입 전류에 따른 레이저 다이오드의 문턱 전류(threshold current), 발진 효율(slope efficiency) 및 출력광 스펙트럼을 측정하였다. 측정 결과, 편향기 전류의 증가에 따라 출력광의 문턱 전류는 증가하고, 발진 효율은 감소하는 경향을 나타내었으나 출력광의 스펙트럼에는 영향을 주지 않는 특성을 나타내었다. 또한, 이론적 계산을 통해 광 편향기를 지나는 광이 편향됨을 확인하고, 편향기 집적 레이저 다이오드에서 출력되는 광의 far-field pattern을 측정하여 편향기 주입 전류에 따른 출력광의 편향을 실험적으로 확인하였다. 제작된 광 편향기 집적 레이저 다이오드에서 15 ㎃의 광 편향기 주입 전류 변화에 대해서 1.9$^{\circ}$의 편향각 변화를 측정 할 수 있었다.
최근 국내외에서 BIM (Building Information Modeling)에 대한 관심이 증가하며 도입사례가 증가하고 있으며, 3차원 모델링은 BIM의 도입을 위한 첫 단추다. 그러나 도로, 철도와 교량과 같은 토목시설물 중심의 3차원 모델링의 효율화 방안에 대한 연구는 많이 이루어지고 있는 반면, 토공사에는 3차원 모델링의 효율화 방안에 대한 연구가 부족한 실정이다. 특히 비탈면 설계는 주위 환경과 지반의 특성에 따라 복잡다단한 형상을 가지는 경우가 많기 때문에 사용자가 비탈면 3차원 모델을 작성하기 위해 효율적인 방안이 필요한 상황이다. 이에 본 연구에서는 국내에서 개발된 e-BIM 모델러와 해외 Autodesk 사의 Civil 3D의 비탈면 모델링 기능의 인터페이스와 절차를 세세히 분석하여 3차원 면의 생성 간격을 입력하는 기능, 기준지형을 다수로 선택하고 각 기준지형 별로 모델링 파라미터를 입력하고 저장할 수 있는 기능을 개발하고 인터페이스를 개선하였다. 본 연구에서 개발한 시스템은 앞서 분석한 소프트웨어와 비교하였을 때 5단계의 절차만으로 효율적으로 비탈면 3차원 모델링을 수행할 수 있고, 클릭 및 입력횟수를 줄일 수 있었다. 본 시스템의 검증을 위해서 개발한 시스템과 타 소프트웨어를 활용하여 동일한 조건 및 형상의 비탈면 모델링을 수행한 결과, 개발한 시스템을 통해 비탈면 모델링을 3회 실시하면 타 소프트웨어를 사용할 때보다 숙련자의 경우 최소 1.8배, 비숙련자의 경우 최소 2.4배만큼 빠르게 작업을 완료할 수 있었다. 이를 통해 비탈면 모델링을 보다 효율적으로 수행하고 모델링 파라미터 저장 기능을 통해 급작스러운 설계변경사항을 적용할 수 있을 뿐만 아니라, 향후 택지조성공사 BIM 도입의 활성화에 기여할 것으로 기대된다.
토양수분의 공간적인 분포를 예측하는 TOPMODEL 지형지수는 지형특성을 기반으로 하는 분포형 환경연구에서 빈번히 활용되는 지형 인자이다. 지형지수에 대한 평가 및 개선은 최근까지도 활발하지만, 대부분은 수정된 다중 유향 알고리듬을 이용한 것들이고, 경사 알고리듬을 이용한 경우는 상대적으로 미흡하다. 본 연구에서는 무한 유향(Dinf) 알고리듬과 Horn 경사 알고리듬을 이용하여 지형지수를 개선하고, 이를 TOPMODEL에 적용하여 모의 수문반응에 대한 영향을 분석하고 평가했다. 연구결과 무한 유향(Dinf) 알고리듬과 Horn 경사 알고리듬을 이용할 경우, 기존 다중 유향(MD8) - 다중 경사(MDS) 알고리듬에 비해 토양수분의 공간적 분포에 보다 근접한 지형지수를 만들 수 있었다. 그러나 최종 유출구의 유출량 모의 효율은 향상되지 않았다. 이 결과는 분포형 환경연구 분야에서 적절한 유향 및 경사 알고리듬을 선택하는데 도움이 될 것이다.
본 연구에서는 강원도 평창군 대관령면에 위치한 산지초지와 초지의 말단에 조성한 식생여과대(Vegetation Buffer Strip, VBS)에 분포형 유역모델 CAMEL을 적용하였다. 그리고 이를 통해 확보한 매개변수를 초지와 식생여과대로 구분한 다수의 시험격자에 적용하여 다양한 인자들에 의한 식생여과대 오염부하 저감효과를 평가하였다. 시험격자를 이용한 시나리오 모의결과, 식생여과대에서 강우의 직접유출량은 식생여과대 폭이 넓어질수록 감소하는 것으로 나타났으며, 전반적으로 경사가 높을수록 오염물질의 저감효율은 낮아지는 것으로 나타났다. 유사의 경우, 식생여과대 폭에 따른 저감효율은 전반적으로 큰 차이를 보이지 않았다. TOC와 TN의 경우, 시험격자의 경사가 $10^{\circ}$, $20^{\circ}$일 때, 식생여과대 폭에 따른 저감효율은 큰 차이를 보이지 않았으나, 경사가 $30^{\circ}$일 때 식생여과대 폭이 좁을수록 높은 저감효율을 보였다. 반면, TP의 경우, 양토(Loam)에서의 저감효율은 전반적으로 높지만, 사양토(Sandy loam)에서는 경사가 $20^{\circ}$, $30^{\circ}$일 때 식생여과대 폭이 넓을수록 높은 저감효율을 보이는 것으로 분석되었다. 이는 TOC와 TN의 모의결과와는 상반되는 결과로 대부분 입자성 물질로 존재하는 인의 경우 지표면에서의 포착현상으로 인해 길이에 따라 비례적으로 저감효율이 높아지는 경향을 보이는 것으로 사료된다. 본 연구에서 구축한 모델은 향후 비점오염물질의 유출을 효과적으로 저감할 수 있는 식생여과대 조성을 위한 기준 등을 제안하는데 효과적으로 사용될 수 있을 것으로 기대된다.
In this study, the analysis to the preference level on slope measuring instrument of weight values on effect factors find out the reasonable monitoring on slope was performed, in which used AHP(Analytic Hierarchy Process) techniques. The results on professional group, such as the industry, academic, institute and government, analyzed that the very important effect factors, which were indicator of various collapse type, convenience of instrument management, The evaluation of preference level on the slope measuring instrument analyzed the invar wire extensometer which was high level at convenience of install, economical efficiency of install and convenience of instrument management.
KICT has been carried out inventory research on the cut slopes of national roads. Inventory research results are basic data using cut slope management system. Inventory data are classified by general status, cut slope characteristics and inspector opinion. Inventory data are utilized to figure out dangerous slopes and decide survey ranking of detailed safety diagnostication. This paper drew the distribution area of dangerous cut slopes using inventory data in Chungcheongdo, and verified efficiency on distribution area of dangerous cut slopes by comparing occurrence frequency of real collapsed cut slopes.
In this study, two estimation equations for preparing stream data for distributed storm runoff model were developed by analyzing the nonlinear relation between upstream flow-length and stream width, and between upstream flow-length and stream bed-slope. The equations for stream cell were tested in Chungjudam watershed (6,661 $km^2$) using KIMSTORM. Six storm events occurring between 2003 and 2008 were selected for the model calibration and verification before the test of equations. The average values of the Nash-Sutcliffe model efficiency (ME), the volume conservation index (VCI), the relative error of peak runoff rate (EQp), and the difference of time to peak runoff (DTp) were 0.929, 1.035, 0.037, and -0.406 hr for the calibrated four storm events and 0.956, 0.939, 0.055, and 0.729 hr for the two verified storm events respectively. The estimation equations were tested to the storm events, and compared the flood hydrograph. The test result showed that the estimation equation of stream width reduced the peak runoff and delaying the time to peak runoff, and the estimation equation of stream bed-slope showed the opposite results.
Most machines lose a lot of energy due to friction. Wear due to friction also reduces performance. Therefore, it is important to reduce friction on the surface to improve energy efficiency and decrease wear. Surface texturing refers to making patterns on the surface for reducing friction. There are many surface texturing methods, such as using lasers, abrasive jet machining, and so on. Recently, mechanical manufacturing methods, such as cutting and grinding, have been highlighted. Among them, the grinding method has the advantage of making patterns in large areas quickly. Therefore, it is appropriate for surface texturing on large machines. This paper is a study on the slope change of the surface texturing pattern using grinding. Therefore, we researched the slopes of the patterns corresponding to "spindle speed and feed rate" and "curvature of workpiece surface" using a mathematical model and experiment. As a result, we made a proper mathematical model concerning our research. Therefore, using the mathematical model in this paper, we could predict the slope change of the pattern according to grinding conditions.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.