• 한국농공학회지
• /
• 제32권3호
• /
• pp.39-46
• /
• 1990

This paper was analized the thermal conductivity of polystylene (TENSAR- GEOGRID) embeding into the subbase through frost penetration depth, frost heave, change of bearing capacity, and soil moisture movement due to freezing, thawing and icing actions, and their results were as follows : 1.The change of temperature into the sub-base was much increased by the Tensar-Geogrid insertion, and the frost penetration and frost heave were decreased as the thinner of the insulation thickness but the thawing velocity of melting period was appeared to be faster in case of non-insulated. 2.The frost heave had a close relationship with the thickness of insulations which was reasonably included anti-frost effects. 3.The moisture content during the freezing period of upper layer of the insulation insertion was increased by 15 per cent but it was returned to initial state of the thawing period, and at the down layer temporarily increased by 10 per cent and returned to the original state at once. 4.The insulation was acted as a function of distribution of surcharge, and the settlement of the sub-base was about 1.5 mm under 15 tonnage of load and which was included within the allowable limits. 5.The sliding resistance due to the icing which was induced by the insulation insertion into the sub-base was appeared as more 40 per cent than noninsulation area, so that the insulations should be restricted on the place such as mountains, curved and cross area which were required the braking power under the traffics.

• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.791-799
• /
• 1997

The wear characteristics and wear mechanisms of plasma sprayed Al/sub 2/ O/sub 3/-40%TiO/sub 2/ and Cr/sub 2/O/sub 3/ deposited on casting aluminum alloy(AC4C) were investigated. Specimens were processed for various coating thicknesses. Ball on disk type wear tester was used for wear test. The scratch test on plasma sprayed coating surface showed that critical load to break the coating layer was greater than 40 N. The critical load increase with the increase of coating thickness of specimens. The friction coefficient of Cr/sub 2/O/sub 3/ coating layer was less than that of Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer. The wear resistance of Cr/sub 2/O/sub 3/ coating layer was greater than that of Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer. Microscopic observation of worn surfaces was made by SEM. SEM observation showed that the main mechanism of wear for Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer was abrasive wear under 50 N. For the case of Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer, as the surface cracks perpendicular to sliding direction propagated, the wear debris was generated in wear track. However, the main mechanism of wear for Cr/sub 2/O/sub 3/ coating layer was brittle fracture under 150 N.

• Tribology and Lubricants
• /
• 제20권6호
• /
• pp.306-313
• /
• 2004

Many of the current development in surface modification engineering are focused on multilayered coatings, which have the potential to improve the tribological properties. Four different multilayered coatings were deposited on AISI D2 steel in this study. The prepared samples are designed as $WC-Ti_{0.6}Al_{0.4}N,\;WC-Ti_{0.53}Al_{0.47}N,\;WC-Ti_{0.5}Al_{0.5}N\;and\;WC-Ti_{0.43}Al_{0.57}N$. The multilayered coatings were investigated with respect to coating surface and cross-sectional morphology, roughness, adhesion, hardness, porosity and tribological behaviors. Especially, wear tests of four multilayered coatings were performed by using a ball-on-disc configuration with a linear sliding speed of 0.017 m/sec and a normal load of 5.38 N load. The tests were carried out at room temperature in air by employing AISI 52100 steel ball $(H_R\;=\;66) $ having a diameter of 10 mm. The surface morphology, and topography of the wear scars of samples and balls have been determined by using scanning electron spectroscopy (SEM). Also, wear mechanism was determined by using SEM coupled with energy-dispersive spectroscopy (EDS). Results have showed an improved wear resistance of the $WC-Ti_{1-x}Al_xN$coatings with increasing of Al (aluminum) concentration.

• 한국지반공학회논문집
• /
• 제31권10호
• /
• pp.61-76
• /
• 2015

최근 지반공학 분야에서는 깊은기초와 얕은기초에 관한 한계상태설계법에 관한 연구가 선행되고 있으며, 옹벽구조물에 관한 연구는 미미한 실정이다. 본 연구는 철도 옹벽의 한계상태설계법을 도입하기 위한 기초 연구로써 옹벽 표준도의 파괴모드별 신뢰도지수가 목표신뢰도지수를 만족하는지를 평가하였으며, 옹벽 표준도에 대한 하중저항계수 설계를 수행함으로써 한계상태설계법의 적용성을 분석하였다. 철도 옹벽 표준도의 일부는 활동 및 지지력파괴에 대한 신뢰도지수가 목표신뢰도지수에 미달하며, 하중저항계수설계법에 의한 한계상태를 만족하지 못하여 한계상태설계 도입 시 철도 옹벽 표준도의 수정이 필요한 것으로 평가되었다.

• 대한기계학회논문집A
• /
• 제38권5호
• /
• pp.469-474
• /
• 2014

고온가스로(HTR-10)는 전기 생산 및 수소 생산에 이용할 목적으로 설계되었다. 고온가스로의 노심에 반사체, 지지체, 감속재로 사용된 흑연은 중성자에 견디는 능력이 탁월하고, 고온 강도 및 열적특성이 우수하다. 구조물들은 연료 순환 유동 등으로 야기되는 진동 등에 의해 마찰이 발생하며 이는 구조물의 파괴를 초래한다. 따라서, 본 연구에서는 고온가스로에 사용되고 있는 등방성 흑연 IG-110에 대한 고온 마모 특성을 연구하였다. 왕복동 마모 시험을 수행하고 마모 특성의 결과로써 마찰계수와 비마모율을 도출하고 비교하였다. 시험 변수로써 실제 작동환경을 고려하여 상온과 고온 $400^{\circ}C$에서 미끄럼 속도와 접촉하중의 변화에 대한 결과를 도출하였다. 또한 흑연 IG-110의 마모 기구에 대해 토의하였다.

• 터널과지하공간
• /
• 제11권3호
• /
• pp.225-236
• /
• 2001

암반 절리면의 거칠기는 전단강도 및 변형거동에 가장 중요한 영향을 미치는 요소 중의 하나이다. 절리면은 전단변형이 발생하는 동안 손상을 받게 되고 이에 따라 거칠기각은 연속적으로 낮아진다. 절리면의 수직팽창성과 강도 경화 및 연화현상도 거칠기의 변화와 관련이 있는 것으로 이해되고 있다. 따라서 절리면의 거칠기의 변화를 효율적으로 반영시킬 수 있는 수치해석 모델의 개발이 중요하다. 이 연구에서는 탄소성이론을 바탕으로 거칠기 변화를 고려할 수 있는 탄소성 응력-변형 증분식을 유도하여 절리면 거질기 변화가 절리면 전단거동에 미치는 영향을 정량적으로 평가하는데 이용하였다. 유도된 탄소성 증분식을 검증하기 위하여 수치 주기전단시험을 실시하였다. 수치시험결과 개발된 탄소성 증분식은 거친 절리면의 주기전단시험에 나타나는 일반적인 현상들을 모사하는데 효과적임을 알 수 있었다.

• 한국산학기술학회논문지
• /
• 제16권4호
• /
• pp.2424-2429
• /
• 2015

유압 피스톤 펌프에서, 고속 상대운동을 하는 실린더 블록과 밸브 플레이트는 누설 및 마찰 손실의 최적화를 위해 극단적으로 제어되어야 하는 특성을 가지고 있으며, 내압 특성 설계는 고압 성능에 매우 중요하지만 이에 대한 응력 해석에 관한 연구가 활발하게 수행되지는 않았다. 따라서 본 논문에서는 CATIA V5를 사용한 정적 응력 해석을 통하여 사판식 유압 피스톤 펌프의 실린더 블록과 밸브 플레이트의 응력과 변위를 해석하고자 하였으며, 실린더 블록의 최대응력은 실린더 뒷부분 동 재질의 접합 소재에 발생하며, 축방향에 비해 반경방향 작용압력이 응력과 변위에 더 큰 영향을 주고, 응력은 약 66%, 변위는 약 30% 더 크게 나타났다. 밸브 플레이트의 경우 재질 및 형상에 대한 검토가 요구됨을 알 수 있었다.

• 열처리공학회지
• /
• 제5권2호
• /
• pp.122-132
• /
• 1992

This study has been performed to investigate into some effects of the power density and traverse speed of laser beam on the optical microstructure, hardness and wear characteristics of medium carbon low alloy steel treated by laser surface hardening technique. The results obtained from the experiment are summarized as follows : (1) Optical micrograph has shown that finer lath martensite is formed and the amount of undissolved complex carbides increases as the traverse speed increases under the condition of a given power density, whereas the coarsening of lath martensite and the reduction of undissolved complex carbides occur with increasing the power density at a given traverse speed. (2) Hardness measurements have revealed that as the traverse speed increases, hardness values of outermost surface layer more of less decrease under low power densities, but are uniformly distributed under high power densities, also showing that they are uniformly distributed at low traverse speeds and more or less decrease at high traverse speeds with increasing the power density. (3) The effective case depth has been found to decrease from 0.26 mm to 0.17 mm with increasing the traverse speed from 1.5 m/min to 3.0 m/min at a given power density of $25.48{\times}10^3w/cm^2$ and to increase from 0.20 mm to 0.36 mm with increasing the power density from $19.11{\times}10^3w/cm^2$ to $38.22{\times}10^3w/cm^2$ at a given traverse speed of 2.0 m/min. (4) Wear test has exhibited that the amount of weight loss of laser surface hardened specimen with respect to sliding distance at a given load increases with increasing traverse speed at a given power density and decreses with increasing power density at a given traverse speed.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.156-156
• /
• 2016

The effect of nitrogen doping on the mechanical and tribological performance of single-layer tetrahedral amorphous carbon (ta-C:N) coatings of up to $1{\mu}m$ in thickness was investigated using a custom-made filtered cathode vacuum arc (FCVA). The results obtained revealed that the hardness of the coatings decreased from $65{\pm}4.8GPa$ to $25{\pm}2.4GPa$ with increasing nitrogen gas ratio, which indicates that nitrogen doping occurs through substitution in the $sp^2$ phase. Subsequent AES analysis showed that the N/C ratio in the ta-C:N thick-film coatings ranged from 0.03 to 0.29 and increased with the nitrogen flow rate. Variation in the G-peak positions and I(D)/I(G) ratio exhibit a similar trend. It is concluded from these results that micron-thick ta-C:N films have the potential to be used in a wide range of functional coating applications in electronics. To achieve highly conductive and wear-resistant coatings in system components, the friction and wear performances of the coating were investigated. The tribological behavior of the coating was investigated by sliding an SUJ2 ball over the coating in a ball-on-disk tribo-meter. The experimental results revealed that doping using a high nitrogen gas flow rate improved the wear resistance of the coating, while a low flow rate of 0-10 sccm increased the coefficient of friction (CoF) and wear rate through the generation of hematite (${\alpha}-Fe_2O_3$) phases by tribo-chemical reaction. However, the CoF and wear rate dramatically decreased when the nitrogen flow rate was increased to 30-40 sccm, due to the nitrogen inducing phase transformation that produced a graphite-like structure in the coating. The widths of the wear track and wear scar were also observed to decrease with increasing nitrogen flow rate. Moreover, the G-peaks of the wear scar around the SUJ2 ball on the worn surface increased with increasing nitrogen doping.

• KSTLE International Journal
• /
• 제6권2호
• /
• pp.39-44
• /
• 2005

Friction and wear properties of the Boron carbide ($B_{4}C$) coating 100 nm thickness were studied under various relative humidity (RH). The boron carbide film was deposited on silicon substrate by DC magnetron sputtering method using $B_{4}C$ target with a mixture of Ar and methane ($CH_4$) as precursor gas. Friction tests were performed using a reciprocation type friction tester at ambient environment. Steel balls of 3 mm in diameter were used as counter-specimen. The results indicated that relative humidity strongly affected the tribological properties of boron carbide coating. Friction coefficient decreased from 0.42 to 0.09 as the relative humidity increased from $5\%$ to $85\%$. Confocal microscopy was used to observe worn surfaces of the coating and wear scars on steel balls after the tests. It showed that both the coating surface and the ball were significantly worn-out even though boron carbide is much harder than the steel. Moreover, at low humidity ($5\%$) the boron carbide showed poor wear resistance which resulted in the complete removal of coating layer, whereas at the medium and high humidity conditions, it was not. X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) analyses were performed to characterize the chemical composition of the worn surfaces. We suggest that tribochemical reactions occurred during sliding in moisture air to form boric acid on the worn surface of the coating. The boric acid and the tribochemcal layer that formed on steel ball resulted in low friction and wear of boron carbide coating.