• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.696-701
• /
• 2016

Multi-stage deep drawing is a widely used industrial manufacturing process, and its applications are gradually expanding to both small products and large metallic products. The USB C-type socket used in smart phones, for example, is manufactured using oval multi-stage deep drawing. The socket is very small and slender and it requires precise manufacturing. The thickness distribution of the final product is guaranteed only if it is uniform throughout the overall process. Therefore, minimizing the height difference between long and short sidewalls after the first operation is important for this goal. An initial blank optimization was performed for an oval-type drawing process based on finite element simulations. The goal was to determine an initial blank geometry that can maintain uniform height and thickness after the first draw operation. The initial blank shape of the sheet metal was optimized, and the results show that it satisfied the conditions of minimal thickness reduction and even thickness distribution. The geometry from the optimized simulation was compared with experimental results, which showed good agreement.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.11
• /
• pp.31-37
• /
• 2021

To prevent accidents due to the cavities and loosened layers formed due to water leakage from the deteriorated buried pipes, evaluation of the changes in water contents around the buried pipes is required. As a method to evaluate the water contents of the soils, time domain reflectometry (TDR) system can be adopted. However, slender electrodes used in standard TDR probe may be damaged when buried in the ground. Thus, in this study, buried type TDR module was developed for the evaluation of the water contents with maintaining required shape of the electrodes in the ground. The TDR module is composed of three electrodes connected to the core conductor and outer conductor and a casing to prevent deformation and maintain alignment of the electrodes in the ground. For the verification of TDR waveforms measured using the TDR module, comparative analysis was conducted with the TDR waveforms measured using the standard TDR probe, and the relationship between the volumetric water content of the soils and the travel time of the guided electromagnetic wave was constructed. In addition, a model test was conducted to test the applicability of the buried type TDR module, and the experimental result shows that the TDR module clearly evaluates the changes in volumetric water contents due to the leakage from the modeled buried pipe. Therefore, the buried type TDR module may be effectively used for the health monitoring of the buried pipe and the evaluation of the water contents around the pipes buried in the urban pavements.

• Korean Journal of Environment and Ecology
• /
• v.35 no.3
• /
• pp.277-284
• /
• 2021

This study surveyed the ecological characteristics of Squalidus gracilis majimae at Nakdong River tributary Sinan Stream from January to December 2020. The species inhabited the riverbed that was mostly covered with gravel and sand. The water depth was 27-158 cm, and the average was rather deep at 54 cm. The stream velocity was slow at 0.41±0.19 (0.24-0.86) m/sec. The gender ratio of females to males was 1:0.73. According to the total length-frequency distribution, the age indicated that the group with less than 50 mm in total length was one year old, the group with 70-69 mm was two years old, and the group over 70 mm was three years old. The total length of sexually mature fishes was 50 mm for females and 60 mm for males. The spawning season was from June to July, and the water temperature was 20.9-23.4℃ during the period. The prosperous spawning season was July. The average number of eggs in the ovaries was 1,009 (595-1,630) per matured female, and the matured eggs were yellowish and spherical with a mean diameter of 0.78±0.08 (0.57-0.83) mm. The live foods were S. gracilis majimae Protozoa, attached algae, zooplankton, and aquatic insects. The feeding habits of S. gracilis majimae are omnivorous, but more than 80% of the stomach content was aquatic insects, Chironomidae spp. The larger the size of this species, the greater the amount and frequency of eating aquatic insects, which are animal feeds. The population that ate aquatic insects did not eat vegetable food.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.2
• /
• pp.73-82
• /
• 2022

The study presents a three-dimensional approach to simulate the nonlinear behavior of a 72 m long Ultra High Performance Fiber Reinforced Concrete (UHPFRC) pre-stressed box girder for a pedestrian bridge in Busan, South Korea. The concrete damage plasticity (CDP) model is adopted to model the non-linear behavior of the UHPFRC material, in which the material properties are obtained from uniaxial compressive and tensile tests. The simulation model based on the proposed stress-strain curve is validated by the results of four-point bending model tests of a 50 m UHPFRC pre-stressed box girder. The results from the simulation models agree with the experimental observations and predict the flexural behavior of the 50 m UHPFRC pre-stressed box girder accurately. Afterward, the validated model is utilized to investigate the flexural behavior of the 72 m UHPFRC pre-stressed box girder. Here, the load-deflection curve, stress status of the girder at various load levels, and connection details is analyzed. The load-deflection curve is also compared with design load to demonstrate the great benefit of the slender UHPFRC box girder. The obtained results demonstrate the applicability of the nonlinear finite element method as an appropriate option to analyze the flexural behavior of pre-stressed long-span girders.

• Journal of the Korean earth science society
• /
• v.44 no.1
• /
• pp.36-46
• /
• 2023

In this study, small bird tracks from the Cretaceous Sanbukdong Formation in Gunsan City, South Korea, were briefly described. Detrital zircon SHRIMP U-Pb dating was conducted of the tuffaceous sandstone from the formation to determine the depositional age of the vertebrate track-bearing strata. Small bird tracks are not well-preserved but divided into two types: two consecutive tracks and three isolated tracks. They are small, asymmetric, slender, functionally-tridactyl tracks, which lack a web between digits. The consecutive and isolated tracks were identified as Koreanaornis dodsoni? and Koreanaornis ichnosp., respectively. This study adds avian tracks to the Sanbukdong tetrapod track assemblage composed of theropods, ornithopods, and pterosaur tracks. According to the U-Pb dating, the estimated age of the Sanbukdong Formation is 112.5±5.8 Ma, regard as the Aptian Stage, representing the maximum depositional age for the Sanbukdong Formation. The Sanbukdong Formation can be correlated with the lower part of the Jinju Formation in the Gyeongsang Basin. Thus, small avian tracks may represent the oldest Korean occurrence of Koreanaornis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.649-656
• /
• 2008

The enhancement of the service life of damaged or cracked structures is a major issue for researchers and engineers. The hierarchic void element based on the integrals of Legendre polynomials is used to characterize the fracture behaviour of unpatched crack as well as repaired crack with bonded composite patches by computing the stress intensity factors and stress contours at the crack tip. Since the equivalent single layer approach is adopted in this study, the proposed element is necessary to represent a discontinuous crack part as a continuum body with zero stiffness. Thus the aspect ratio of this element to represent the crack should be extremely slender. The sensitivity of numerical solution with respect to energy release rate, displacement and stress has been tested to show the robustness of zero stiffness element as the aspect ratio is increased up to 2000. The stiffness derivative method and displacement extrapolation method have been applied to calculate the stress intensity factors of Mode I problem. It is noted that the proposed hierarchical void element can be one of alternatives to analyze the patched crack problems.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.5
• /
• pp.375-387
• /
• 2023

The subsea power cables are increasingly important for harvesting renewable energies as we develop offshore wind farms located at a long distance from shore. Particularly, the continuous flexural motion of inter-array dynamic power cable of floating offshore wind turbine causes tremendous fatigue damages on the cable. As the subsea power cable consists of the helical structures with various components unlike a mooring line and a steel pipe riser, the fatigue analysis of the cables should be performed using special procedures that consider stick/slip phenomenon. This phenomenon occurs between inner helically wound components when they are tensioned or compressed by environmental loads and the floater motions. In particular, Vortex-induced vibration (VIV) can be generated by currents and have significant impacts on the fatigue life of the cable. In this study, the procedure for VIV fatigue analysis of the dynamic power cable has been established. Additionally, the respective roles of programs employed and required inputs and outputs are explained in detail. Demonstrations of case studies are provided under severely sheared currents to investigate the influences on amplitude variations of dynamic power cables caused by the excitation of high mode numbers. Finally, sensitivity studies have been performed to compare dynamic cable design parameters, specifically, structural damping ratio, higher order harmonics, and lift coefficients tables. In the future, one of the fundamental assumptions to assess the VIV response will be examined in detail, namely a narrow-banded Gaussian process derived from the VIV amplitudes. Although this approach is consistent with current industry standards, the level of consistency and the potential errors between the Gaussian process and the fatigue damage generated from deterministic time-domain results are to be confirmed to verify VIV fatigue analysis procedure for slender marine structures.

• Korean Journal of Ichthyology
• /
• v.35 no.4
• /
• pp.361-365
• /
• 2023

On May 12, 2023, a juvenile specimen (37.6 mm in standard length) belonging to the order Aulopiformes was collected from southern Yokjido, Tongyeong, Korea, using a Bongo net. The specimen was identified as the member of the family Scopelarchidae in having a slender body, a large mouth, large tube-like eyes, a long anal fin base, a developed adipose fin and no photophores on body. Finally, we identify the specimen as Scopelarchoides danae Johnson, 1974 in having 8 dorsal fin rays, 20 pectoral fin rays, 9 pelvic fin rays, 26 anal fin rays, dorsal fin located anteriorly than pelvic fin, and two large pigments below the pectoral fin and posterior to the pelvic fin. Scopelarchoides danae is distinguished from Scopelarchoides signifer in having less dorsal fin rays (8 vs. 9~10) and pectoral fin rays (20 vs. 22~25). The species differs from Scopelarchus guentheri and Scopelarchus analis in that it has no stripes along the both upper and lower of lateral line, and from Scopelarchus michaelsarsi in that it has more anal fin rays (26 vs. 18~21). Because this is the first occurrence among Korean fish fauna, we present its detailed morphological traits, and its new Korean name as "Nun-bang-ul-mae-tung-i".

• Korean Journal of Ichthyology
• /
• v.36 no.1
• /
• pp.94-100
• /
• 2024

During ichthyoplankton survey in the southwestern sea of Korea, we collected six individuals of noodlefish larvae and juveniles between April and May 2023. They were identified as Neosalanx anderssoni by mitochondrial DNA cytochrome c oxidase subunit I or 16S ribosomal RNA sequences, and their external morphological traits were described for the first time. All six individuals have a slender and elongated body. When preflexion and flexion larval stages (10.24 mm notochord length, NL and 15.47 mm total length, TL, respectively), oval-shaped black melanophores were distributed in a row along the ventral side of the gut. However, when postflexion larval and juvenile stages (23.58~25.90 mm TL, and 29.20~31.26 mm TL, respectively), melanophores on the ventral side of the gut were disappeared, and dark spot-shaped melanophores appeared along the dorsal side of the gut in a single row. Also, from the postflexion larval stage (23.58 mm TL), two large black spots began to appear symmetrically on the caudal fin. Our results suggest that N. anderssoni may use coastal area as spawning and/or nursery ground unlike previous study (Kim and Park, 2002).

• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.131-142
• /
• 2024

The purpose of this study was to estimate the optimal stand density criteria for each growth stage of Chamaecyparis obtusa (Siebold & Zucc.) Endl. to achieve the timber production goal for cypress forests and develop an optimal silvicultural system for forest thinning. A relative yield index (Ry) value of 0.75, presented as a stand density management criterion index, was estimated by analyzing the relationship characteristics between the composition ratio and stand density of slender trees from 216 sample plots of the recruited cypress forests. The analysis of the feasibility of achieving each production target in the existing silvicultural system for C. obtusa revealed that the growth rate according to the parameters of forest land productivity, such as site index and thinning intensity according to the increase in age, was not properly reflected. In the thinning system for each timber production target analyzed in this study, 353 high-quality large hardwoods from 498.1 m³/ha, 703 high-quality medium hardwoods from 376.2 m³/ha, and 1,758 small-diameter hardwoods from 249.5 m³/ha could be harvested. Although the silvicultural system prepared on the basis of the results of this study cannot be uniformly applied according to various management goals, this study is meaningful in that it presents empirical reference standards based on the stand density management diagram that reflects the growth characteristics of cypress forests in South Korea.