• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.454-462
• /
• 2014

This study was carried out to determine the effect of tree height on light transmission, spray penetration, tree growth performance, fruit quality attributes, and labor productivity in the slender-spindle system of 'Hongro'/M.9 apple trees. With increasing tree height, the light penetration into the internal parts of the canopy decreased, especially in the lower canopy. Leaf area index (LAI) increased with increasing tree height, thereby leading to a reduction in the extent of spray penetration into the interior of the canopy. With increasing tree height, shoot growth was more vigorous but produced slender shoots in the upper canopy compared to the lower canopy. Although the soluble solid content and coloration of fruit decreased, there was no difference in fruit firmness and acidity. In addition, the number of final fruit set increased, although the production of large fruit (> 305 g) decreased. The increase in tree height also significantly increased the labor required for practices such as thinning of flowers and fruits, pruning, and harvesting. Nevertheless, this problem of increased in labor input in taller trees would was eased by use of a mechanical lift. Utilizing a lift for thinning the flowers of trees 4.5 m in height saved 14.6 min per tree, compared to the use of ladder. Therefore, it is highly considerable that in order to enhance light transmission and fruit coloration, light conditions should be improved in the internal tree canopy of slender-spindle systems.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.17 no.6
• /
• pp.271-278
• /
• 2013

The hysteretic behavior of diagonal reinforced coupling beams is excellent during earthquakes. However, construction of the diagonal reinforced coupling beams is difficult due to complex reinforcement details required by current code procedures (ACI 318-11). Due to the detail requirement, reinforcement congestion and interference among transverse reinforcement always occur during construction field. When the aspect ratio of the beam is large, the interference of reinforcement becomes more serious. The objective of this paper is to simplify the reinforcement details of slender coupling beams by reducing transverse reinforcement around the beam perimeter. For this purpose, high- performance fiber reinforced cementitious composites are used for making coupling beams. Experiments were conducted using three specimens having aspect ratio 3.5. Test results showed that HPFRCC coupling beams with half the transverse reinforcement required by ACI 318-11 provided identical seismic capacities to the corresponding coupling beams having requirement satisfying the requirement specified in ACI 318-11.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.67-79
• /
• 1991

Geomrtric nonlinearity of axially and laterally loaded reinforced concrete slender columns has been generally considered by use of second order analysis such as $P-{\Delta}$ method. Complex procedure in second order analysis may not be a difficult problem with computer aid, however it has been seldom used in design offices because of the need of carefully decided input data. In lieu of second order analyses, the Korean and the American concrete codes have adopted the moment magnifier method. It is known, however, that this method results in too conservative design in some cases. Accuracy of the moment magnifier method to the experimentally obtained data has been reviewed and an improved method has been proposed for better result.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.6
• /
• pp.1027-1039
• /
• 1995

Clothing fitness is strongly required in the apparel industry, and draping is an effective tool to increase fitness to the wearers. A more sophisticated and systematic information of the somatotype, accordingly, is necessary for better cress form design. This study was performed to provide fundamental data on middle aged women's upper torso for dress form designers and pattern makers by classifying the somatotype based on each individual's lateral view, and analyzing the characteristics of their somatotype. Data were analyzed by factor analysis, cluster analysis, analysis of variance. Factor analysis was used to 23 items from photometric measurment and cluster analysis was applied for classification of upper torso forms. Through cluster analysis using 5 factor scores, 3 somatotypes were categorized from th lateral view 1) Type I was straight somatotype in which the plumb line passes throught the lobe of the ear, the shoulder joing and the mid abdominal region laterally. This type of woman was slender and shorter than average. 2) Type II was bending somatotype in which the upper portion of upper torso is bent forward. This type of woman was taller and fatter than average. 3) Type III was swayback somatotype in which the upper portion of protruding point on the back is bent forward but the lower portion of protruding point had characteristic of turning over somatotype. This type of woman had storter length on the front and longer lenght on the back, slender type and flat chest.

• Journal of Sericultural and Entomological Science
• /
• v.9
• /
• pp.7-13
• /
• 1969

This experiment was carried out to know how to cut of the mulberry branches, formed by multi-stemmed pruning, which is together with the correlation between the leaf yield and total length, total diameter, or total length X total diameter of branches. The results are as follows: 1. In case of spring pruring, cutting off 5 cm high uniformly, cutting off thick one 10 cm high and cutting off slender one 5 cm high were best. 2. In case of summer pruning, cutting off upper part one 5 cm high and cutting off lower part one 10 cm high, cutting off thick one 10 cm high, slender one 5 cm high, 5 cm high uniformly were best. 3. As the result of this experiment, cutting off all the branches 5 cm high uniformly was available.

• Journal of Ecology and Environment
• /
• v.40 no.1
• /
• pp.1-4
• /
• 2016

Recent ocean warming near the Korean peninsula and our lack of knowledge of an important vertebrate group, the sea snakes, encouraged us to clarify this part of Korea's regional fauna. We re-examined photographs that had been used to report the slender-necked sea snake (Hydrophis melanocephalus) in 1995. We discovered it was misidentified. To determine the correct identity of the sea snake, we studied 13 original photographs taken at the collecting site in Sooyoung Bay, Busan-si, in 1995 and determined the snake to be Laticauda semifasciata based on enlarged ventral scales, definitive for Laticaudinae sea snakes, and internasal scales, pale blue body color, divided rostral scale, and evident "V"-shaped stripes on the body trunk, definitive for L. semifasciata. Therefore, the snake caught 30 years ago in Korean waters should be considered the first record of a Laticaudinae sea snake in Korean waters. L. semifasciata is listed as near threatened setting the stage for urgently needed studies of sea snakes in Korea and supporting those currently underway.

• Archives of Plastic Surgery
• /
• v.45 no.6
• /
• pp.572-577
• /
• 2018

Background Mandibular contouring surgery to produce a more slender and small face has become popular, especially in East Asia. Narrowing genioplasty should be simultaneously performed with mandibular angle resection to achieve satisfactory results. In Korea, T-genioplasty has been frequently performed for chin narrowing. The authors developed a new, safe, and reliable method, termed M-genioplasty, that can provide a more slender and attractive lower face. Methods From June 2013 to December 2017, 36 patients underwent M-genioplasty with mandibular angle resection for lower facial contouring. Horizontal and vertical osteotomies were performed obliquely. The resected bone segments were wedge-shaped. The remaining two bone segments were rotated and approximated centrally. The lateral mandible bony step-off was trimmed off for mandibular angle resection. Results In all patients, the facial contour sufficiently improved, and most patients were satisfied with the outcome. No severe complications took place during postoperative follow-up. Conclusions M-genioplasty can provide more mandibular angle resection and can create a more acute chin angle without bone resorption than other methods, including T-genioplasty. M-genioplasty with mandibular angle resection is a safer, more accurate, and more reliable method for lower facial contouring.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.6
• /
• pp.497-504
• /
• 2015

In this paper, we study the propulsive behavior related to the flagellar motion of bacteria using a spring model. A commercial program was used to conduct simulations, and we verified the numerical technique by setting an additional rotating domain and conducting a parametric study. The numerical results are in good agreement with slender-body theory, although overall, they are not in agreement with resistive-force theory. We confirm the effect of the rotational velocity, pitch, helical radius, fluid viscosity, and, in particular, the distance from the wall on the propulsion of the spring.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.3 s.46
• /
• pp.329-337
• /
• 2000

The Load and Resistance Factor Design(LRFD) Specification defines two sets of limiting width-to-thickness ratios. On the basis of these limiting values, steel sections are subdivided into three categories: compact, noncompact, and slender sections. In this paper, I-Type girders of a 2 span continuous steel bridge are divided into compact and non-compact sections and analyzed. In the design process, an optimization formulation was adopted and ADS, a Fortran program for Automated Design Synthesis, was used. In this study, we studied about change of the section between compact and non-compact using optimization formulation.

• Animal Systematics, Evolution and Diversity
• /
• v.28 no.1
• /
• pp.29-35
• /
• 2012

Two Spirostomum species collected from freshwater in Korea were identified as S. caudatum (Muller, 1786) and S. teres (Claparede and Lachmann, 1858). They are recorded for the first time in Korea. The description was based on the observation of living specimens and protargol impregnated specimens. Diagnostics of these species are as follows. Spirostomum caudatum: body size $400-450{\times}20-30\;{\mu}m$ in vivo, shaped long and slender with a tapered posterior part, highly contractile; macronucleus ellipsoid; adoral zone of membranelles occupied 30% of body length; somatic kineties 14-22 in number. Spirostomum teres: body size $240-460{\times}25-40\;{\mu}m$ in vivo, shaped long and slender with a flattened posterior end, highly contractile; cortical granules arranged in 2-3 rows; adoral zone of membranelles occupied 50% of body length; somatic kineties 20-30 in number; macronucleus ellipsoid; micronuclei 2-3 in number. Spirostomum caudatum and S. teres are the most similar congeners, but they are different in the posterior part of body (tail-like posterior part vs. flattened posterior end), length of adoral zone of membranelles in body length (1/3 vs. 1/2), and the number of somatic kineties (14-22 vs. 20-30). These populations match with European populations in morphological characters.