• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.5
• /
• pp.635-638
• /
• 2003

Japanese Black cattle (Wagyu) are fed for a long period to produce high quality beef, however, extended feeding often causes inefficiency and greater environmental load mainly derived from their manure. The objectives of this study were to analyze changes in feeding length by listing breeding values (BVs) at calf markets and the relationships between BVs and carcass characteristics of 4,052 Japanese Black cattle, and to examine the feasibility of optimizing feeding length by referring to listed BVs. BV classes A, B, and C were defined based on BVs of cows in Shimane Prefecture as follows: an upper quarter of BVs was classified as A, a second quarter as B, and under the average as C. For cattle sold at calf markets in the first term of 1996, just before the start of BV listing, the feeding length of cattle with class B BVs for the beef marbling standard (BMS) was longer (p>0.05) than that of class A cattle. However, in the second term of 1996, just after the start of BV listing, the feeding length of class B cattle became shorter (p<0.001) than that of class A cattle. Then, the feeding lengths of both classes showed no significant differences. Feeding lengths of both class A and B BVs for carcass weight (CW) changed similarly to the corresponding BV classes for BMS. The analysis of the relationships among the listed BV classes and the actual carcass characteristics showed that class A cattle had a higher (p<0.001) BMS than class B cattle, and that the higher-class cattle had a heavier CW (p<0.05). On the basis of previous reports, the cattle, particularly those with lower genetic marbling ability, seem to only increase marbling at markedly low efficiency for a few months before slaughter. Therefore, the finding that carcass characteristics corresponded to their class of BVs suggests that an optimum feeding length based on listed BVs not only increases the efficiency of beef production, but also reduces the environmental load.

• Korean Journal of Agricultural Science
• /
• v.48 no.3
• /
• pp.527-534
• /
• 2021

This study investigated the possibility of performing selection using 30-month carcass traits by estimating the genetic parameters of 24- and 30-month carcass traits. Data used in this study were the carcass traits of 13,151 heads slaughter at the age of 24 and 30 months. As a result of the study, the heritability of backfat thickness, carcass weight, eye muscle area and marbling score at 24 months of age were estimated to be 0.588, 0.354, 0.467 and 0.587, respectively. The heritability of backfat thickness, carcass weight, eye muscle area and marbling score at 30 months of age were estimated to be 0.498, 0.577, 0.505 and 0.530, respectively. The ranking correlation was 0.516 between the carcass selection indices of 24 and 30 months of age. By providing a 30-month selection index, it is possible to use semen suitable for farm profits, and more semen information can be provided to farms than previously. Furthermore, studies on a selection index based on 30-month carcass traits are needed to provide highly accurate information.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.7
• /
• pp.1049-1054
• /
• 2003

A group of Hanwoo (Korean cattle) steers (n=14,386) was sampled from a commercial abattoir located in Seoul over one year period (spring, summer, autumn and winter) and their carcass traits were collected. Carcass traits assessed by an official meat grader comprised degree of marbling, meat color, fat color, texture and maturity for quality grade, and back fat thickness, ribeye area and carcass weight for yield grade. A heavier carcass with a higher marbling score, more red meat color and white fat color received better quality grade (p<0.05). Regression analysis showed that the marbling score was the strongest attribute (partial $R^2=0.88$) for quality grade. Lighter carcasses with a thinner back fat and larger ribeye area received higher yield grade score. The back fat thickness was the most negative determinant of yield grade (Partial $R^2=-0.66$). The slaughter season had a little effect on quality and yield grades. As slaughter weight increased, back fat thickness and ribeye area increased linearly, whereas marbling score reached its asymptotic level at approximately 570 kg. As a consequence, quality grade showed a considerable improvement up to 570 kg, but increases in slaughter weight afterward showed a little benefit on quality grade. There was a clear curvilinear relationship between slaughter weight and yield grade in that the yield grade reached its highest point at approximately 490 kg and decreased afterward. These results suggested that 570kg at the age of 24 months might be the economic slaughter weight for quality grade but 490 kg for yield grade.

• Korean Journal of Agricultural Science
• /
• v.46 no.3
• /
• pp.461-469
• /
• 2019

The aim of this study was to analyze the contribution of carcass traits (backfat thickness, eye muscle area, carcass weight and marbling score) and the season at slaughter to the price (auction and market) using squared semi-partial correlation. The season at slaughter (summer expressed as season_2, autumn as season_3, and winter as season_4) were added into the estimation as dummy variables, and spring was set as a default variable. In this study, the carcass grades of 22,298 Hanwoo steers slaughtered from 2012 to 2017 were used to performmultiple regression analysis. The rankings of the contribution of the carcass traits and the seasons at slaughter to the auction prices were in the order of marbling score (68.63%), season_4 (11.88%), backfat thickness (10.45%), eye muscle area (6.11%), season_3 (2.19%), season_2 (0.45%) and carcass weight (0.28%). (R-square of the regression = 0.4101). The rankings of the contribution to the total prices were in the order of carcass weight (51.74%), marbling score (32.12%), season_4 (6.04%), backfat thickness (5.54%), eye muscle area (3.22%), season_3 (1.14%), and season_2 (0.19%). (R-Square of the regression = 0.6486). As a result, season_3 and season_4 had a negative effect on the auction price and total price. Because of seasonal event such as Korean Thanksgiving Day and Korean New Year's Day on season_3 and season_4, much supply was needed to meet the high demand. Thus, the seasonal effect at slaughter could be another factor to be cosideredin when considering of slaughter or breeding.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.4
• /
• pp.591-595
• /
• 2002

Three hundred thirty five progeny testing steers of Korean beef cattle were evaluated ultrasonically for back fat thickness (BFT), longissimus muscle area (LMA) and intramuscular fat (IF) before slaughter. Class measurements associated with the Korean yield grade and quality grade were also obtained. Residual standard deviation between ultrasonic estimates and carcass measurements of BFT, LMA were 1.49 mm and $0.96cm^2$. The linear correlation coefficients (p<0.01) between ultrasonic estimates and carcass measurements of BFT, LMA and IF were 0.75, 0.57 and 0.67, respectively. Results for improving predictions of yield grade by four methods-the Korean yield grade index equation, fat depth alone, regression and decision tree methods were 75.4%, 79.6%, 64.3% and 81.4%, respectively. We conclude that the decision tree method can easily predict yield grade and is also useful for increasing prediction accuracy rate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.10
• /
• pp.1404-1408
• /
• 2006

In order to investigate the genetic marker associated with economic performance in Hanwoo (Korean Brown Cattle), proteomic approach was used. Breeding values were estimated from performance tested steers. The top 20 and bottom 19 steers based on carcass weight (CW), eye muscle area (EMA), backfat thickness (BF) and marbling score (MS) evaluation for one progeny testing period was used. Meat samples dissected from longissimus dorsi muscles were taken from the slaughter house and analyzed for two-dimensional gel electrophoresis. A total of 102 significant spots out of total 146 on each gel were detected and compared with the reference gel (synthetic gel) to be evaluated. Four candidate spots for marbling score were identified: 205, 84, 204 and 198. The study confirmed the relationship between breeding values of economic traits of Hanwoo cattle and spot intensity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.10
• /
• pp.1656-1665
• /
• 2020

Objective: This study aimed to determine the effects of stress during slaughter of beef cattle on physiological parameters, carcass, and meat quality at a Federal Inspection Type slaughterhouse located in the southeast of Mexico. Methods: A total of 448 carcasses of male Zebu×European steers with an average age of 36 months were included. Carcass assessment of presence of bruises and bruise characteristics was carried out on each half-carcass. Blood variable indicators of stress (packed cell volume, neutrophil to lymphocyte ratio, glucose, cortisol concentration) and meat quality parameters (pH, color, shear force, drip loss) were evaluated. Results: Of the 448 carcasses evaluated, 81% of the carcasses showed at least one bruise; one bruise was detected in 36.6% and two bruises in 27.0% of animals. Of the 775 bruises found, 69.2% of the bruises were grade 1 in region 3. Of the 448 carcasses studied, 69.6% showed hyperglycemia (6.91 mmol/L); 44.3% and 22.7% showed high (74.7 ng/mL) and extremely high (108.8 ng/mL) cortisol levels, respectively, indicative of inadequate handling of animals during preslaughter and slaughter. Of the carcasses evaluated, 90.4% had a pH ≥5.8 with an average of pH 6.3. In both pH groups, meat samples showed L^⋆ values >37.0 (81.6%) and a shear force >54.3 N; meat pH≥5.8 group showed a drip loss of 2.5%. These findings were indicative of dark, firm, and dry (DFD) meat. According to principal component analysis, grades 1 and 2 bruises in region 3 and grade 1 bruises in region 5 were highly associated with cortisol, drip loss, and color parameters b^⋆ and h^⋆ and were negatively associated with L^⋆, a^⋆, and C^⋆. Conclusion: The bruises probably caused by stress-inducing situations triggered DFD meat. Appropriate changes in handling routines in operating conditions should be made to minimize stress to animals during the slaughter process to improve animal welfare and meat quality.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.7
• /
• pp.848-854
• /
• 2010

The objectives of this study were to estimate genetic parameters for the carcass price and carcass traits contributing to carcass grading and to investigate the influence of each carcass trait on the carcass price using multiple regression and path analyses. Data for carcass traits and carcass prices were collected from March 2003 to January 2009 on steers of Korean cattle raised at private farms. The analytical mixed animal model, including slaughter house-year-month combination, linear and quadratic slaughter age as fixed effects and random animal and residual effects, was used to estimate genetic parameters. The effects of carcass traits on the carcass price were evaluated by applying multiple regression analyses. Heritability estimates of carcass traits were $0.20{\pm}0.08$ for carcass weight (CWT), $0.33{\pm}0.10$ for back fat thickness (BFT), $0.07{\pm}0.05$ for eye-muscle area (EMA) and $0.25{\pm}0.10$ for marbling score (MS), and those of carcass prices were $0.21{\pm}0.10$ for auction price per 1 kg of carcass weight (AP) and $0.13{\pm}0.07$ for total price (CP). Genetic correlation coefficients of AP with CWT and MS were $-0.35{\pm}0.29$ and $0.99{\pm}0.04$, respectively, and those of CP with CWT and MS were $0.59{\pm}0.22$ and $0.39{\pm}0.29$ respectively. If an appropriate adjustment for temporal economic value is available, the moderate heritability estimates of AP and CP might suggest their potential use as the breeding objectives for improving the gross incomes of beef cattle farms. The large genetic correlation estimates of carcass price variables with CWT and MS implied that simultaneous selection for both CWT and MS would be also useful in enhancing income.

• Korean Journal of Veterinary Service
• /
• v.13 no.2
• /
• pp.148-153
• /
• 1990

In order to know the incidence of foot rot in herds and slaughter houses, a total of 3,665 cattles were examined the incidence rate, vaccination. and drug susceptibllity the during the period from June to Novemer 1989. Eighty nine (2.42%) of'3,665 cattles were affected by the foot rot. and the highest incidence was observed on July and August. The foot rot was affected more frequently in hind limbs than frort limbs. In the vaccinated cattles of non affected herds, the disease was not occurred after-wards. Affected cattles which were treated with saturated picric acid gave more effective than those with 10% cupuric acid or 5％ formalin in comarative treatment test.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.4
• /
• pp.263-267
• /
• 1990

The fat thicknesses of twenty-eight Japanese Black beef steers were measured with an ultrasonic device at eleven points on the cattle prior to slaughter and side dissection. The relation between live fat thickness and both weight and percentage of fat and lean in the carcass was examined. Fat thickness obtained from nine points of the chest, flank and rump regions was found to relate significantly (P<0.01) to both weight and percentage of fat. However, shoulder fat thickness measurements were not significantly related to the weight or percentage of fat or lean in the carcass. Addition of live fat thickness to animal age or live weight as an independent variable markedly improved the precision of multiple regression equations for predicting weight of fat and lean, and percentage of fat. In predicting the percentage of lean, both animal age and body weight were not employed in the multiple regression equation. The residual standard deviation for predicting percentage of fat and lean were 1.93 and 1.87, respectively. The ultrasonic measurement of fat thickness if supposed to be useful to the prediction of carcass composition of beef cattle.