• Journal of International Society for Simulation Surgery
• /
• v.1 no.1
• /
• pp.13-15
• /
• 2014

Nowadays, with advanced 3D printing techniques, the custom-made implant can be manufactured for the patient. Especially in skull reconstruction, it is difficult to design the implant due to complicated geometry. In large defect, an autograft is inappropriate to cover the defect due to donor morbidity. We present the process of manufacturing the 3D custom-made implant for skull reconstruction. There was one patient with skull defect repaired using custom-made 3D titanium implant in the plastic and reconstructive surgery department. The patient had defect of the left parieto-temporal area after craniectomy due to traumatic subdural hematoma. Custom-made 3D titanium implants were manufactured by Medyssey Co., Ltd. using 3D CT data, Mimics software and an EBM (Electron Beam Melting) machine. The engineer and surgeon reviewed several different designs and simulated a mock surgery on 3D skull model. During the operation, the custom-made implant was fit to the defect properly without dead space. The operative site healed without any specific complications. In skull reconstruction, autograft has been the treatment of choice. However, it is not always available and depends on the size of defect and donor morbidity. As 3D printing technique has been advanced, it is useful to manufacture custom-made implant for skull reconstruction.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.3 no.1
• /
• pp.47-57
• /
• 2016

Results from multiple high profile experiments on the parameters influencing the impacts that cause skull fractures to the frontal, temporal, and parietal bones were gathered and analyzed. The location of the impact as a binary function of frontal or lateral strike, the velocity, the striking area of the impactor, and the force needed to cause skull fracture in each experiment were subjected to statistical analysis using the JMP statistical software pack. A novel neural network model predicting skull fracture threshold was developed with a high statistical correlation ($R^2=0.978$) and presented in this text. Despite variation within individual studies, the equation herein proposes a 3 kN greater resistance to fracture for the frontal bone when compared to the temporoparietal bones. Additionally, impacts with low velocities (<4.1 m/s) were more prone to cause fracture in the lateral regions of the skull when compared to similar velocity frontal impacts. Conversely, higher velocity impacts (>4.1 m/s) showed a greater frontal sensitivity.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.668-671
• /
• 2010

In this paper, we present a novel automatic algorithm for scalp and skull segmentation in T1-weighted head MR images. First, the scalp and skull part are constructed by using intensity threshold. Second, the scalp outer surface is extracted based on an active level set method. Third, the skull inner surface is extracted using a canny edge detection algorithm. Finally, the fast sweeping, tagging and level set methods are applied to reconstruct surfaces from the detected points in three-dimensional space. The results of the new segmentation algorithm on MRI data acquired from eight persons were compared with manual segmented data. The average similarity indices for the scalp and skull segmented regions were equal to 84.42% for the test data.

• Imaging Science in Dentistry
• /
• v.34 no.1
• /
• pp.13-18
• /
• 2004

Purpose : This study was to evaluate the influence of slice thickness of computed tomography (CT) and rapid protyping (RP) type on the accuracy of 3-dimensional medical model. Materials and Methods: Transaxial CT data of human dry skull were taken from multi-detector spiral CT. Slice thickness were 1, 2, 3 and 4 mm respectively. Three-dimensional image model reconstruction using 3-D visualization medical software (V-works /sup TM/ 3.0) and RP model fabrications were followed. 2-RP models were 3D printing (Z402, Z Corp., Burlington, USA) and Stereolithographic Apparatus model. Linear measurements of anatomical landmarks on dry skull, 3-D image model, and 2-RP models were done and compared according to slice thickness and RP model type. Results: There were relative error percentage in absolute value of 0.97, 1.98,3.83 between linear measurements of dry skull and image models of 1, 2, 3 mm slice thickness respectively. There was relative error percentage in absolute value of 0.79 between linear measurements of dry skull and SLA model. There was relative error difference in absolute value of 2.52 between linear measurements of dry skull and 3D printing model. Conclusion: These results indicated that 3-dimensional image model of thin slice thickness and stereolithographic RP model showed relative high accuracy.

• Journal of Korean Neurosurgical Society
• /
• v.48 no.1
• /
• pp.85-87
• /
• 2010

We experienced a rare case of solitary syphilitic osteomyelitis of the skull without any other clinical signs or symptoms of syphilis. A 20-year-old man was referred due to intermittent headache and mild tenderness at the right parietal area of the skull with a palpable coin-sized lesion of softened cortical bone. On radiological studies, the lesion was a radiolucent well enhanced mass (17 mm in diameter). The erythrocyte sedimentation rate (52 mm/h) and C-reactive protein (2.24 mg/dL) were elevated on admission. Serum venereal disease research laboratory (VDRL) and Treponema pallidum haemagglutination assay (TPHA) tests were positive. There were no clinical signs or symptoms of syphilis. After treatment with benzathine penicillin, we removed the lesion and performed cranioplasty. The pathologic finding of the skull lesion was fibrous proliferation with lymphoplasmocytic infiltration forming an osteolytic lesion. In addition, a spirochete was identified using the Warthin-starry stain. The polymerase chain reaction study showed a positive band for Treponema pallidum. Solitary osteomyelitis of the skull can be the initial presenting pathological lesion of syphilis.

• Korean Journal of Veterinary Research
• /
• v.34 no.4
• /
• pp.705-714
• /
• 1994

This study was carried out to identify the craniometric characteristics of the skull of Korean native goat. The results were as follows; The skull index, cranial index, facial index, right orbital index and left orbital index were $55.86{\pm}2.14$, $59.97{\pm}3.68$, $107.03{\pm}5.71$, $92.22{\pm}4.54$and $90.47{\pm}5.48$, respectively. The ratio of facial length to cranial length was 1:1.15 and the ratio of length of cranial base to palatal length was 1:1.35. The skull length was more correlated to the facial length than to the cranial length(p<0.01). The skull width was more correlated to the width between foramina supraorbitales than to the width between foramina infraorbitales. It also showed negative correlation to the medial width between bases of processus cornualis but positive correlation to the lateral width between bases of processus cornualis(p<0.01). The width between tips of both horns showed high positive correlation to the medial width between processus cornualis, but negative correlation to the lateral width(p<0.01).

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.39.1-39.6
• /
• 2015

Skull-base osteomyelitis is a rare disease affecting the medulla of the temporal, sphenoid, and occipital bones. In general, it occurs due to external ear canal infections caused by malignant external otitis. Skull-base osteomyelitis usually affects elderly diabetic patients. The patient, a 58-year-old man, was referred for evaluation and management of the left jaw. Clinical examination of the patient revealed pain in the left jaw and mouth-opening deflection to the left. The maximum active mouth opening was measured to about 27 mm. Panoramic, CT, and CBCT revealed bone resorption patterns in the left condyle. Through control of diabetes, continued pharmacological treatment, arthrocentesis, and occlusal stabilization appliance therapy were carried out. The extent of active mouth opening was increased to 45 mm, and pain in the left jaw joint was alleviated. This was a case wherein complications caused by failure to control diabetes induced skull-base osteomyelitis. There is a need for continued discussion about the advantages and disadvantages of arthrocentesis with lavage for patients with skull-base osteomyelitis and other treatment options.

• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.387-392
• /
• 2017

When an infant has visited a hospital due to skull fracture, the rupture of a blood vessel, or skin wounds on the head resulted from an incident, accident, traffic accident, or disease, he/she becomes to undergo anterior/posterior and lateral skull imaging, which is a head test at the department of radiology. In the head test, if the adult skull imaging grid is applied to the imaging, the secondary radiation will be removed to enhance the contrast of the image. However, among the radiation exposure conditions, the tube voltage should be enhanced by 8~10 kVp leading to an increase in the patient exposure. The present study was conducted under assumption that if the same images can be obtained from infant skull imaging without using the skull imaging grid, the exposure dose will be reduced and the artifacts due to grid cut off can be prevented. The researcher measured the radiation dosage using a radiation meter and conducted the subjective evaluation (ROC, receiver operating characteristic) among medical image evaluation methods. Based on the results, when the images were taken without using the grid, the exposure dose was reduced by 0.019 mGy in the anterior/posterior imaging and by 0.02 mGy in the lateral imaging and the image evaluation score was higher by 4 points. In conclusion, if the images of the skulls of infants that visited the hospital are taken with out using the grid, the exposure dose can be reduced, the image artifacts due to grid cut off can be prevented, and the lifespan of the X-ray tube will be extended.

• Archives of Plastic Surgery
• /
• v.39 no.2
• /
• pp.118-123
• /
• 2012

Background : An area of the skull exposed by burn injury has been covered by various methods including local flap, skin graft, or free flap surgery. Each method has disadvantages, such as postoperative alopecia or donor site morbidities. Due to the risk of osteomyelitis in the injured skull during the expansion period, tissue expansion was excluded from primary reconstruction. However, successful primary reconstruction was possible in burned skull by tissue expansion. Methods : From January 2000 to 2011, tissue expansion surgery was performed on 10 patients who had sustained electrical burn injuries. In the 3 initial cases, removal of the injured part of the skull and a bone graft was performed. In the latter 7 cases, the injured skull tissue was preserved and covered with a scalp flap directly to obtain natural bone healing and bone remodeling. Results : The mean age of patients was $49.9{\pm}12.2$ years, with 8 male and 2 female. The size of the burn wound was an average of $119.6{\pm}36.7cm^2$. The mean expansion duration was $65.5{\pm}5.6$ days, and the inflation volume was an average of $615{\pm}197.6mL$. Mean defect size was $122.2{\pm}34.9cm^2$. The complications including infection, hematoma, and the exposure of the expander were observed in 4 cases. Nonetheless, only 1 case required revision. Conclusions : Successful coverage was performed by tissue expansion surgery in burned skull primarily and no secondary reconstruction was needed. Although the risks of osteomyelitis during the expansion period were present, constant coverage of the injured skull and active wound treatment helped successful primary reconstruction of burned skull by tissue expansion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3117-3122
• /
• 2011

Skull A-P projections are the bi-product where the ESD (Entrance Surface Dose) for digital radiography is much higher than that conventional screen-film radiography. Therefore, the aim of this study was to reduce radiation doses to patients by using an added filter. This research focuses on the identification of the reduction of exposure to radiation based on the thickness of an added filter when applying the 'Skull A-P Projection' by using the 'Skull Phantom'. Also, an experiment was conducted to evaluate the qualitative decline of images through filtration. The measurement of one's exposed dose to radiation was executed by locating the 'Skull Phantom' on the position of the 'Skull AP,' while changing 16 kinds of added filters from 0.1 mmAl to 0.5 mmCu + 2.0 mmAl in terms of incident and penetrating doses. For the qualitative evaluation of images, a total number of 17 images have been acquired in the 'Skull Phantom' under the same conditions as those for the measurement of one's exposed dose. The acquired images have been evaluated by a radiological specialist. As a result, the images with a diagnostic value have been obtained by using such added filters as the compound filter of 0.2 mmCu +1.0 mmAl. The exposed dose absorbed on the 'Skull Phantom' is about 0.6 mGy. The value is only 12% of 5 mGy, the ESD value acquired on the 'Skull P-A Projection', which is recommended by the International Atomic Energy Agency (IAEA). As a result, depending on the parts of inspection, it is possible to reduce the patient's exposed dosage of radiation considerably by using an appropriate added filter.