• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.6
• /
• pp.84-97
• /
• 2016

This study was to investigate the user's thermal environments of the children's parks according to pavements and sunscreen types during periods of heat waves. The measurements were conducted at the sand pits, rubber chip pavement, shelters, and green shade ground of the two children's parks located in Jinju, Korea(Chilam: $N\;35^{\circ}11^{\prime}1.4{^{\prime}^{\prim}}$, $E\;128^{\circ}5^{\prime}31.7{^{\prime}^{\prime}}$, elevation 38m, Gaho: $N\;35^{\circ}09^{\prime}56.8{^{\prime}^{\prime}}$, $E\;128^{\circ}6^{\prime}41.1{^{\prime}^{\prime}}$, elevation 24m) over three days during 11-13, August, 2016. The highest ambient air temperatures at the Jinju Meteorological Office during the three measurement days were $35.9{\sim}36.8^{\circ}C$, which corresponded with the extremely hot weather. A series of experiments measured air temperature, relative humidity, wind velocity, black globe temperature, and long-wave and short-wave radiation of the six directions 0.6 m above ground level. The wet bulb globe temperature(WBGT) and the universal thermal climatic index(UTCI) were used to evaluate thermal stress. Surface temperature images of the play equipment were also taken using infrared thermography. Surface temperatures of the play equipment and grounds were used to evaluate burn risk through contact with playground materials. The results showed the following. The maximum air temperatures averaged over 1-hour period for three days were $36.6{\sim}39.4^{\circ}C$. The sun shades reduced those temperatures by up to $2.8^{\circ}C$(green shade) and $1.0^{\circ}C/2.3^{\circ}C$(shelters). The minimum relative humidity values averaged over 1-hour period for three days were 44~50%. The sun shades increased those humidity values by up to 6%(green shade) and 4%/6%(shelters). The risk of heat related illness at the measurement sites of the children's parks were extreme and high in the daytime hours. The maximum WBGT values averaged over a 30-minute period for three days were $31.2{\sim}33.6^{\circ}C$. The sun shades reduced those WBGT values by up to $2.4^{\circ}C$(green shade) and $0.5^{\circ}C/2.1^{\circ}C$(shelters) compared to sandpits, but would not block the risk of heat related illness in the daytime hours. The category of heat stress at the measurement sites of the children's parks were extreme and very strong in the daytime hours. The maximum UTCI values averaged over a 30-minute period for three days were $39.9{\sim}48.1^{\circ}C$. The sun shades reduced those UTCI values by up to $7.8^{\circ}C$(green shade) and $4.1^{\circ}C/8.2^{\circ}C$(shelters) compared to sandpits, but could not lower heat stress category from extreme and very strong to strong and moderate in the daytime hours. According to the burn threshold criteria when skin was in contact with playground materials, the maximum surface temperature of the stainless steels($70.8^{\circ}C$) surpassed three seconds $60^{\circ}C$ threshold for uncoated steel, that of the rubber chip($76.5^{\circ}C$) surpassed five seconds $74^{\circ}C$ threshold for the plastic, that of the plastic slide($68.5^{\circ}C$) and seats($71.0^{\circ}C$) surpassed the one min $60^{\circ}C$ threshold for plastic, respectively. The surface temperatures of shaded play equipment were lower approximately $20^{\circ}C$ than those of play equipment exposed to the sun. Therefore, sun shades can block the risk of burns in daytime hours. Because of the extreme and high risk of heat related illness and extreme and high heat stress at the children's parks during periods of heat waves, parents and administrators must protect children from the use of playgrounds. The risk of burn when contact with play equipments and grounds at the children's parks during periods of heat waves, was very high. The sun shades are essential to block the risk of burn from play equipments and grounds at the children's parks during heat waves.

• The Korean Journal of Physiology and Pharmacology
• /
• v.12 no.4
• /
• pp.177-183
• /
• 2008

The layers of keratinocytes form an acid mantle on the surface of the skin. Herein, we investigated the effects of acidic pH on the membrane current and $[Ca^{2+}]_c$ of human primary keratinocytes from foreskins and human keratinocyte cell line (HaCaT). Acidic extracellular pH ($pH_e{\leq}5.5$) activated outwardly rectifying $Cl^-$ current ($I_{Cl,pH}$) with slow kinetics of voltage-dependent activation. $I_{Cl,pH}$ was potently inhibited by an anion channel blocker 4,4'-diisothiocyanostilbene-2,2'-disulphonic acid (DIDS, 73.5% inhibition at 1${\mu}$M). $I_{Cl,pH}$ became more sensitive to $pH_e$ by raising temperature from $24^{circ}C$ to $37^{circ}C$. HaCaT cells also expressed $Ca^{2+}$-activated $Cl^-$ current ($I_{Cl,Ca}$), and the amplitude of $I_{Cl,Ca}$ was increased by relatively weak acidic $pH_e$ (7.0 and 6.8). Interestingly, the acidic $pH_e$ (5.0) also induced a sharp increase in the intracellular [$Ca^{2+}$] (${\triangle}[Ca^{2+}]_{acid}$) of HaCaT cells. The ${\triangle}[Ca^{2+}]_{acid}$ was independent of extracellular $Ca^{2+}$, and was abolished by the pretreatment with PLC inhibitor, U73122. In primary human keratinocytes, 5 out of 28 tested cells showed ${\triangle}[Ca^{2+}]_{acid}$. In summary, we found $I_{Cl,pH}$ and ${\triangle}[Ca^{2+}]_{acid}$ in human keratinocytes, and these ionic signals might have implication in pathophysiological responses and differentiation of epidermal keratinocytes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.621-628
• /
• 2002

Effect of the thickness of packaging film on the ripening of mature-green mume (Prunus mume Sieb. et Zucc) fruit was investigated by measuring physicochemical changes of the fruit during storage. Fruits were packaged using low density polyethylene (LDPE) films with thicknesses of 20, 30, and 40$\mu$m and stored at the room temperature. The physicochemical properties such as contents of various pectic substances, molecular weight distribution of soluble pectic substances, and surface image of the fruit were determined during storage of 8 days. In general, regardless of the thickness of the films applied, a content of water-soluble pectin (WSP) in the fruit was increased during storage, but both contents of HCI- soluble pectin (HSP), and Ca and Mg in total alcohol-insoluble solids were decreased. Sephacryl S-300 gel filtration study revealed that fractions of high molecular weight HSP and WSP decomposed into lower molecular weight pectins during storage. The scanning electronic microscope also identified a significant structural change of the fruit skin over the storage time. It could be concluded from the results that fruits packaged with LDPE 30${\mu}{\textrm}{m}$ film maintained the highest physicochemical quality of green mume fruit during storage.

• Archives of Plastic Surgery
• /
• v.41 no.4
• /
• pp.317-324
• /
• 2014

Background Burn infliction techniques are poorly described in rat models. An accurate study can only be achieved with wounds that are uniform in size and depth. We describe a simple reproducible method for creating consistent burn wounds in rats. Methods Ten male Sprague-Dawley rats were anesthetized and dorsum shaved. A 100 g cylindrical stainless-steel rod (1 cm diameter) was heated to $100^{\circ}C$ in boiling water. Temperature was monitored using a thermocouple. We performed two consecutive toe-pinch tests on different limbs to assess the depth of sedation. Burn infliction was limited to the loin. The skin was pulled upwards, away from the underlying viscera, creating a flat surface. The rod rested on its own weight for 5, 10, and 20 seconds at three different sites on each rat. Wounds were evaluated for size, morphology and depth. Results Average wound size was $0.9957cm^2$ (standard deviation [SD] 0.1845) (n=30). Wounds created with duration of 5 seconds were pale, with an indistinct margin of erythema. Wounds of 10 and 20 seconds were well-defined, uniformly brown with a rim of erythema. Average depths of tissue damage were 1.30 mm (SD 0.424), 2.35 mm (SD 0.071), and 2.60 mm (SD 0.283) for duration of 5, 10, 20 seconds respectively. Burn duration of 5 seconds resulted in full-thickness damage. Burn duration of 10 seconds and 20 seconds resulted in full-thickness damage, involving subjacent skeletal muscle. Conclusions This is a simple reproducible method for creating burn wounds consistent in size and depth in a rat burn model.

• Journal of fish pathology
• /
• v.10 no.2
• /
• pp.97-111
• /
• 1997

In the winter of 1995, mass mortality occurred in cultured flounder, Paralichthys olivaceus in Gurongpo, Kyoungbuk, Korea. From the observations of moribund and dead fish, parasitic ciliates, which were shown as white spots to the naked eye, were considered to be involved in the mass mortality. From heavily infected flounders, histopathological, morphological and biological characterization of these ciliates were carried out. In the histological observation, many ciliates were found under the epithelia of gill filaments and skin, and caused hyperplasia of epithelial and mucus cells at the infected areas. The ciliates found on the body surface, fins and gills were very similar to Cryptocaryon irritans. However the ciliates showed two different patterns of reproductian, i.e., typical form(palintomy)and atypical form(budding plus multiple fission) at $16^{\circ}C$ of water temperature. The occurrence ratio between typical and atypical form was about 3:2. Tomitogenesis takes 8-14 days in the typical and 13-15 days in the atypical form. In the viability test at different temperatures and salinities, the typical form died below 30‰ at $12^{\circ}C$, below 20‰ at $16^{\circ}C$, below 15‰ at $20^{\circ}C$, and below 25‰ at $24^{\circ}C$, respectively. On the other hand, the atypical form died below 20‰ at $12^{\circ}C$, below 15‰ at 16-$20^{\circ}C$, and below 25‰ at $24^{\circ}C$, respectively. The results suggested that the atypical has better viability at low salinity than that of the typical at low temperatures. In the excystment time and success rates of excystment according to temperatures, the typical form showed 8 days, 30% at $12^{\circ}C$ : 6.5 days, 50%, at $16^{\circ}C$ : 5.5 days, 75% at $20^{\circ}C$ : and 7 days, 10% at $24^{\circ}C$, respectively. On the other hand, the atypical form showed 15.5 days at $12^{\circ}C$ : 14 days, 76.6% at $16^{\circ}C$ : 12 days, 72.2% at $20^{\circ}C$ : 10 days 31.6% at $24^{\circ}C$, respectively. The results suggested that the atypical form had longer excystment time than that of the typical form at any temperature and showed better stability at low temperatures.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1837-1847
• /
• 2008

The goal of this study is to express the image of chameleons-that change their colors by light, temperature and its mood-into the sexy styles of corresponding coquettish temperamental people in Wearable Art. The method used in this study was experimenting various production mediums, including creating the textured stretch fabric, in the process of expressing the conceptual characteristics of the chameleon in Wearable Art. The concept of the work was a concoction of 'tempting', 'splendid', 'brilliant', 'fascinating', etc. that highlighted the real disposition of the chameleon. The futuristic preference of the researcher was also implicated. "Comfortable" and "enjoyable" concepts via motions were improved with the its completeness. The point of the design and production is to express symbolically the chameleon in real life, analyzing its sleek body lines, conditional colors changing, outer skins and the cubic textures. The coquettish temperamental image, the conceptual image of the chameleon, was also expressed by implication into the whole work. The entire line of this work is body-conscious silhouette. It was symbolically selected to image the outline of the chameleon that has the slim and sleek body. The exposed back is intended to express symbolically the projected back bones of the chameleon. The hood of gentle triangle line expresses the smooth-lined head part. The irregular hemlines represent the elongated chameleon's tale. The chameleon with its colors of vivid tones is characterized the colors changing by its conditions. This point was importantly treated in the working process by trying the effects that the colors are seen slightly different according to the light and angles. The material was given the effect that its surface colors are seen different in lights and angles because of the wrinkles protruded lumpy-bumpy. The various stones of red and blue tones are very similar to the skin tones of the real chameleon, and their gradation makes the effect that the colors are visibly changed with each move. The textures of the chameleon were produced via the wrinkle effect of smoke-shape, which is the result of using the elastic threads on the basic mediums stitched with 50/50 chiffon and polyester along with velvet dot patterns. The stretching fabric by the impact of the elastic threads is as much suitable for making the body-conscious line. The stones are composed of acrylic cabochon and gemstone. They are symbolically expressed the lumpy and bumpy back skin of the chameleon and produced the effect of the colors visibly different. The primary technique used in this dress is the draping utilizing the biased grains. The front body piece is connected to the hood and joined to the back piece without any seam. For the irregular hemline flares, leaving the several rectangular pieces with bias grains, they were connected by interlocking. What defines the clothes is the person in action. Therefore, what decides the completeness of clothes might be its comfortable and enjoyable feeling by living and acting people. The chameleon dress could also reach its goal of comforting and pleasing Wearable Art in the process of studying the techniques and effects that visibly differentiate the colors. It is considered as a main point of the Wearable Art, which is a comfortable enjoyable clothing tempered with the artistic beauty.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.356-365
• /
• 2022

Agrivoltaic systems, also called solar sharing, stated from an idea that utilizes sunlight above the light saturation point of crops for power generation using solar panels. The agrivoltaic systems are expected to reduce the incident solar radiation, the consequent surface cooling effect, and evapotranspiration, and bring additional income to farms through solar power generation by combining crops with solar photovoltaics. In this study, to evaluate if agrivoltaic systems are suitable for viticulture, we investigated the microclimatic change, the growth of vines and the characteristics of grape grown under solar panels set by planting lines compared with ones in open vineyards. There was high reduction of wind speed during over-wintering season, and low soil temperature under solar panel compared to those in the open field. There was not significant difference in total carbohydrates and bud burst in bearing mother branches between plots. Despite high content of chlorophyll in vines grown under panels, there is no significant difference in shoot growth of vines, berry weight, cluster weight, total soluble solid content and acidity of berries, and anthocyanin content of berry skins in harvested grapes in vineyards under panels and open vineyards. It was observed that harvesting season was delayed by 7-10 days due to late skin coloration in grapes grown in vineyards under panels compared to ones grown in open vineyards. The results from this study would be used as data required in development of viticulture system under panel in the future and further study for evaluating the influence of agrivoltaic system on production of crops including grapes.