• Advances in concrete construction
• /
• 제8권3호
• /
• pp.187-198
• /
• 2019

Torsional behaviors of beams are investigated for the web reinforcement and the concrete type. Eight beams with self-compacting concrete (SCC) and twelve beams with conventional concrete (CC) were manufactured and tested. All the models manufactured as the $250{\times}300{\times}1500mm$ were tested according to relevant standards. Two concrete types, CC and SCC were designed for 20 and 40 MPa compressive strength. From the point of web reinforcement, the web spacing was chosen as 80 and 100 mm. The rotation angles of the concrete beams subjected to pure torsional moment as well as the cracks occurring in the beams, the ultimate and critical torsional moments were observed. Moreover, the ultimate torsional moments obtained experimentally were compared with the values evaluated theoretically according to some relevant standards and theories. The closest estimations were observed for the skew-bending theory and the Australian Standard.

• 한국지반공학회논문집
• /
• 제19권6호
• /
• pp.127-149
• /
• 2003

본 교량은 교축방향에 대해 사각 60도인 90m 3경간 연속 완전 일체식 교대교량이다. 이 교량의 상부슬래브 콘크리트 타설후, 7일간의 콘크리트 양생에 따른 H말뚝의 수평거동을 알아보기 위하여, H말뚝 축방향으로 매설형 경사계와 변형률계를 설치하여 계측을 실시하였다. 이때 계측 결과를 수화열 및 건조수축 전용프로그램인 HACOM의 해석결과와 H말뚝의 횡방향 비선형 p-y 모델해석 거동에 비교하였다. 그 결과에 의하면, 실측한 H말뚝의 수평변위는 상부슬래브 콘크리트가 양생함에 따라 발생하는 수화열과 건조수축에 영향을 받았고, 그 크기는 각각 2.2mm, 1.4mm이었다. 말뚝 축방항 수평변위의 변곡점은 교대 기초저면에서 1.3m 위치에서 발생하였다. 이는 이 교량의 교대말뚝은 말뚝머리 고정조건으로 거동하는 것이 아니라 이와 매우 유사한 거동을 보였다. 그리고 실측한 말뚝의 휨응력 거동은 말뚝머리 회전구속과 같은 거동을 보이지 않고, 연직방향의 하중전이와 같은 거동을 나타내었다. 또한 교대말뚝의 비선형 p-y 모델해석으로 구한 최대휨응력 증분량의 크기는 약 300(kgf/$\textrm{km}^2$)이었고, 교대말뚝의 계측기 부착위치와는 무관하게 실측한 값보다 약 2배 크게 발생하였다. 그리고 말뚝의 비선형 p-y 모델해석에서 말뚝의 수평하중, 최대수평 변위, 최대휨응력, 최대휨모멘트는 콘크리트 양생시간에 따라 모두 선형적인 거동을 보였다.

• 한국자동차공학회논문집
• /
• 제4권5호
• /
• pp.16-25
• /
• 1996

In the present work a rigid-plastic finite element formulation using dynamic explicit time integration scheme is proposed for numerical analysis of auto-body panel stamping processes. The rigid-plastic finite element method based on membrane elements has long been employed as a useful numerical technique for the analysis of sheet metal forming because of its time effectiveness. A damping scheme is proposed in order to achieve a stable solution procedure in dynamic sheet forming problems. In order to improve the drawbacks of the conventional membrane elements, BEAM(abbreviated from Bending Energy Augmented Membrane) elements are employed. Rotational damping and spring about the drilling direction are introduced to prevent a zero energy mode. The lumping scheme is employed for the diagonal mass matrix and linearizing dynamic formulation. A contact scheme is developed by combining the skew boundary condition and the direct trial-and-error method. Computations are carried out for analysis of complicated auto-body panel stamping processes such as forming of an oilpan, a fuel tank and a front fender. The numerical results of explicit analysis are compared with the implicit results with good agreements and it is shown that the explicit scheme requires much shorter computational time, especially when the problem becomes more complicated. It is thus shown that the proposed dynamic explicit rigid-plastic finite element method enables an effective computation for complicated autobody panel stamping processes.