The purpose of this study was to investigate the effectiveness of integrated education research conducted in Korea and to propose a meaningful discussion for further research. Among the studies conducted for last five years, the relevant 69 research articles were selected, and 211 effect sizes were calculated. Effect sizes were analyzed with different dependent variables including creativity, problem solving ability, inquiry skills, scientific recognition, attitude, interest, motivation and self-esteem. In addition, effect sizes with different moderating variable, such as samples sizes, characteristics of subjects, class types, core disciplines were compared. The conclusions of this study was that STEAM education had a relatively middle effect size. Finally, researchers discussed the results related with previous results, and provided the implications and suggestion for future studies.
The purpose of this study is to provide for some basic data useful to production of the apparels fit and measured well for the Chinese men. For this Purpose, Chinese adult men's body types and their changes over time which had been surveyed by preceding studies were compared by age group with those of Korean adult men which had been published in a report on National Anthropometric Survey of Korea in 1997 The results of this study can be summarized as follows; 1. As a result of comparatively analyzing the differences of body types between Chinese and Korean adult men, Chinese men have higher stature and arms, while weighing more. 2. As a result of comparatively analyzing the differences of body types between Chinese and Korean adult men by age group, it was found that the changes of body types due to aging are similar between two groups. Namely, as they become older, their vertical sizes become smaller, while their horizontal sizes become larger gradually.
Journal of information and communication convergence engineering
/
제10권3호
/
pp.242-247
/
2012
In the determination of suitable frame sizes associated with dynamic framed slotted Aloha used in radio frequency identification tag identification processes, the widely imposed constraint $L=2^Q$ often yields inappropriate values deviating far from the optimal values, while a straightforward use of the estimated optimal frame sizes causes frequent restarts of read procedures, both resulting in long identification delays. Taking a trade-off, in this paper, we propose a new method for determining effective frame sizes where the effective frame size changes in a multiple of a predetermined step size, namely ${\Delta}$. Through computer simulations, we show that the proposed scheme works fairly well in terms of identification delay.
The purpose of this study was to develop a grading increment at armhole area by apparel CAD(Computer Aided Design) system. In developing a grading increment at armhole area, we analyzed ease values of armhole area in bodice and sleeve by manual drafting patterns of five sizes. We suggested grading increments applied Pythagorean theorem to development the grading increment of the armhole of sleeve. The results and discussions of this study were as follows: 1. In drafting each size, the ease values were not identical. It was difficult to draft perfectly the same armhole line shape between sizes. 2. According to our developed grading increments applied Pythagorean theorem, the ease values were identical between sizes and difference of the armhole length between sizes was also identical. 3. The grading formulas were made out for apparel CAD system. Once grading increment or formula is set in the computer, it can be easily altered to various clothing items at any time. The efficiency of grading work will be also improved and grading time will be reduced.
The purpose of this study was to review materials that could provide basic data about sports brassieres. In this study, 486 sports brassieres were collected online from 31 brands between November 2015 and February 2016. First, the comparison of compression and encapsulation in sports brassieres identified many different styles. The characteristics of compression brassieres included a cut cup, the front center height of a full cup, round neckline, short front hem, all in one shoulder strap with a patterned racerback design, all in one closure, no wire, and separation cup styles. The characteristics of encapsulation brassieres included a V-shape neckline, mixed round shoulder strap design, back closure, and all in one cup. Second, the comparison of domestic and international sports brassieres sorted the items differently. The characteristics of domestic products included compression brassieres, non-cut cup, the front center height of a full cup, round neckline, short front hem, an all in one shoulder strap with a patterned round design, all in one closure, no wire, and a separation cup. The characteristics of international products included a cut up, racerback shoulder strap design, and an all in one cup. Third, the analysis of domestic and international sports brassieres sizes found that six options were available for domestic compression sports brassieres and nine sizes were available for international products. Domestic encapsulation sports brassieres offered five under bust sizes and five cup sizes. International products offered eight under bust sizes and sixteen cup sizes.
Objective : The relations of the heart size and seven emotions were described in Dong Yi Bo Gam, and we aimed to identify the correlations of the patients with anxiety disorder and their heart sizes. Methods : The subjects were 15 patients with anxiety disorder and 20 control groups. Chest radiography were performed. We measured patients' heart sizes and compared with control groups. Results : 1. The signigicant difference of somatization, anxiety, depression scale and Panic anxiety scale in SCL-90-R in patients with anxiety disorder from controls was confirmed. 2. The difference of thoracic sizes in patients with anxiety disorder and controls had no correlations. 3. The difference of heart sizes in patients with anxiety disorder and controls had no correlations. 4. The difference of cardiothoracic ratio in patients with anxiety disorder and controls had negative correlations. Conclusions : Based on these results, the patients with anxiety disorders and their heart sizes had no correlations. But in cardiothoracic ratio had negative correlations. So heart size and seven emotions have significant correlation.
The purpose of this study was to research on breast shape and size to suggest a brassiere sizing chart for elderly women. For this purpose 90 elderly women aged between 55 and 69 were sampled at random to review their breast types by age group, and thereby, suggest the basic measurements and production ratio of each brassiere size in reference to KS K 0070: 1999. The collected measurement data were processed statistically using the SPSS PC/WIN program for technical statistical analysis. The results of this study can be summarized as follows; 1. Analysis of Breast Measurements To find out difference among age groups, the 90 subjects were grouped into three(Group 1 ; aged 55 to 59, Group 2 ; aged 60 to 64, Group 3 ; aged 65 to 69). The results of the comparative analysis of anthropometric data from three groups show that getting older;- Various length measurements related to the drooping degree of breast were increased. It was found that the older group in their 65-69's had more drooping breasts than their 55-59's or 60-64's counterparts. Such findings suggests that older women's drooping can be corrected by a brassiere which serves to support the breasts. 2. Suggestions on a Brassiere Sizing For the basic measurements of brassiere parts for the elderly women, the correlation between underchest circumferences and cup sizes were analyzed. 3% or higher occurrences among the whole sample elderly women were included in the brassiere sizes. thus, the under-chest measurements were set at four intervals from 75 to 95, while the cup measurements were determined also at four intervals from "AAA" to "B" sizes. The resultant 6 sizes excluding the least frequent occurrences covered 73.2% of the sample elderly women actual breast sizes. As a consequence of reviewing the production ratio of each brassiere size for the women, it was found that the brassiere size of highest production ratio was "85A" (17.4%), followed by 80A (14.5%), 85AA 90A (10.1%) and 75A (8.7%) in their order.
This study intend to analyze differences between 3D body scanning sizes and direct measurement sizes of same subjects. The subjects of study are female students of university in China. 3D data analyze as a 3D Body Measurement Soft System. The conclusion found is as below: In case of circumferences, error between direct-measurement size and 3D body scanning size is from 4.9mm to 62.2mm. The neck circumference size of directmeasurement is bigger than 3D body scanning size. The height error range is from 0.6mm to 51mm. Height of underbust, waist and hip are that direct-measurement sizes are higher than 3D body scanning sizes. Gap of width is from 3.8mm to 21.9mm. The gap range is too narrow relatively to others. Only direct-measurement size of neck width is wider than 3D body scanning size. Error range of length is from 0.3mm to 41.8mm. 3D body scanning sizes of lateral neck to waistline, upperarm length, arm length, neck shoulder point to breast point, shoulder center point to breast point, lateral shoulder to breast point are longer than direct-measurement sizes. They have a negative margin of error. I intend to set up same measurement point between direct-measurement and 3D body scanning but they have some errors because direct-measurement point is applied by a person. 3D body scanning measurement point is settled by automatic system. A measurement point of direct-measurement and 3D body scanning isn't unite. So we need to make a standard of setting up measurement points.
The purpose of this study is to survey and analyze the general conditions of infants' apparel brands in Korea, review the sizes and specifications of each brand, analyze the differences and correlations among brands, and thereby, present the reasonable sizes and specifications for infants' apparels in consideration of domestic and foreign specifications and infants' health conditions. for this purpose, 13 brands manufacturing the apparels for the infants aged from 0 to 4 were sampled, and their design directors and outside pattern suppliers were surveyed through direct interviews. The collected data were processed for frequencies, mean, median and mode. The results of this study can be summarized as follows; 1. The sample infants' apparel brands were mostly launched as national brands in 1990's, while their target ages were diverse : 0 $\sim$ 72 months, 0 $\sim$ 36 months, 0 $\sim$ 48 months, 0 $\sim$ 60 months, 12 $\sim$ 24 months, etc. 2. More brands were restructuring the pattern suppliers' sizes and specifications rather than developing them directly, which suggests that most of infants' brands depend much on pattern suppliers. 3. Infants' apparel brands were presenting the 'space suites' sized from #60 to #90 because consumers prefer those space suites distinct in their upper and lower parts and convenient for their toddlers aged 36 months or older. The brands were setting the sizes for 6 parts: total length, breast, sleeve length, hip, hip height, leg. 4. The sizes for infants' one-pieces were #70, #75, #80, #85, #90, #95, #100, #110 and #120, while their subsizes were determined for 4 parts: total length, breast, sleeve length, hip.
A machine vision-based instrument to measure a droplet size spectrum of a spray nozzle was developed and tested to evaluate its accuracy on measuring spray droplet sizes and classifying nozzle sizes. The instrument consisted of a machine vision, light emitting diode (LED) illumination and a desktop computer. The illumination and machine vision were controlled by the computer through a C++ program. The program controlled the machine vision to capture droplet images under controlled illumination, and processed the droplet images to characterize the droplet size distribution of a spray nozzle. An image processing algorithm was developed to improve the accuracy of the system by eliminating random noise and out-of-focus droplets in droplet images while measuring droplet sizes. The instrument measured sizes of the three different balls (254.0, 497.8 and $793.8\;{\mu}m$) and the measurement ranges were $241.2-273.6\;{\mu}m$, $492.9-529.6\;{\mu}m$ and $800.8-824.1\;{\mu}m$ for 254.0-, 497.84- and $793.75-\;{\mu}m$ balls, respectively. Error of the measured droplet mean was less than 3.0 %. Droplet statistics, $D_{V0.1}$, $D_{V0.5}$ and $D_{V0.9}$, of a reference nozzle set were measured, and droplet size spectra of five spray nozzles covering from very fine to extremely coarse were measured to classify spray nozzle sizes. Ninety percent of the classification results of the instrument agreed with manufacturer's classification. A comparison study was carried out between developed and commercial instruments, and measurement results of the developed instrument were within 20 % of commercial instrument results.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.