• Journal of Korean Society of Transportation
• /
• v.14 no.2
• /
• pp.157-172
• /
• 1996

The long-existed licence system which has acted as one of the strong barriers to entry in the ocean shipping market in Korea is supposed to repeal in the near future. As a result, competition among the different sizes of firms which are operating under regional shield by means of the licence will be intensified. The main objective of this paper is to estimate the degree of economies of scale and economies of density for various firm sizes. For the successful estimation of economies scale and economies of density, translog cost models are developed and estimated through SURE technique which was suggested by Zeller (1963). The major findings are as follows ; All shipping firms in the sample exhibit economies of scale and density. Even small size shipping firms under licence system, they show substantial economies of scale contrary to the wide-known idea that small-size firms are subject to diseconomies of scale. For the ranked firm sizes according to owned deadweight tons, the degree of economies of scale decreases as the firm sizes are larger and larger. The degree of economies of density moderately declines from the smallest to the firm size of 30-60 thousand deadweight tons and sharply rise thereafter. And the large shipping firms with over half-million deadweight tons exhibit high economies density compared to other sizes of firm. If follows that the larger firms have great advantage in competition if the licence system is abolished.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.1
• /
• pp.143-153
• /
• 2004

The Purpose of this study is provide fundamental data on a suitable sizes of ready-to-wear for women. The subjects of the survey were 300 female of 18 to 24 years old. They were measured direct anthropometry. Height, bust girth, waist girth and hip girth were grouped by KS interval. Data were analyzed by use of Cross Tab method. The results of this study were as follows. Body group of the anthropometric measurements were summed up as follows. Height was divided into 4 section(155-170), bust girth was divided into 7 section(76-94), waist girth was divided into 6 section(61-76) and hip girth was divided into 9 section(84-100). The characteristics of cross tab can be summarized as follows. Section with application ratio are 155-160cm of height, 82-85cm for bust girth, 64-70cm for waist girth and 86-94cm for hip girth. The sizes of high cover ratio of well-fitting jacket, dress, coat and one-piece was 17 sizes, well-fitting an upper garment and the whole body garment item except that was 16 sizes, and a lower garment was 21 sizes.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.146-148
• /
• 2001

This paper discusses the optimal sizes of BESS. The goal must be optimized electricity charge of the customers-side with choosing the time-of-use rates. Therefore the cost is minimized by BESS installed the customers-side. Feasible ROR that means the ratio of capital costs to economic effect owned the optimal BESS sizes is determined the suitable domestic condition based on the battery cost and power converter system cost. Payback period times can be presented by BESS through the ROR. Multi-Pass Dynamic Programming(MPDP) algorithm is applied to the customer for the optimal sizes determination in this paper. It is to solve the optimal solution under the constraints. To investigate the efficiencies of the constraints, it is applied the typical load curve to the high-voltage customer owned Time-Of-Use(TOU) whether BESS is installed or not. Well, The result is obtained that feasible BESS sizes can be achieved the suitable customers-side of meter through the ROR.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.6
• /
• pp.916-922
• /
• 1997

This paper attempted to estimate mesh selectivity of gill nets for neon flying squid in the north Pacific Ocean. The 11 linear regressions, (P<0.05) were obtained using the data on catch ratios derived from mesh size combinations between two slightly different mesh sizes of 12 kinds of research gillnet (namely 33, 37, 42, 48, 55, 63, 72. 76, 86, 96, 105 and 115 mm in stretched mesh size). There was an increase in the optimum length with the increase in mesh size but standard deviation showed somewhat increase with the increase in the mesh size. The selectivity curves were well fitted to the length frequency distributions obtained from samples for the mesh sizes from 48 mm through 86 mm. For the mesh sizes of 33, 37 and 42 mm the DML (Dorsal Mantle Length) compositions were distributed towards the right hand-limb of the curves. The DML distributions from the 96 mm and larger meshes showed a trend towards the left hand-limb of the curves. The selectivity curves for different mesh sizes indicate that large mesh sizes catch a greater size range of squid, and the gill net fishery in the north Pacific Ocean captures effectively neon flying squid within the range of $9\~43cm$ DML.

• Structural Engineering and Mechanics
• /
• v.54 no.5
• /
• pp.891-908
• /
• 2015

For a systematic study on wind-induced vibration characteristics of large hyperbolic cooling towers with different feature sizes, the pressure measurement tests are finished on the rigid body models of three representative cooling towers with the height of 155 m, 177 m and 215 m respectively. Combining the refined frequency-domain algorithm of wind-induced responses, the wind-induced average response, resonant response, background response, coupling response and wind vibration coefficients of large cooling towers with different feature sizes are obtained. Based on the calculating results, the parametric analysis on wind-induced vibration of cooling towers is carried out, e.g. the feature sizes, damping ratio and the interference effect of surrounding buildings. The discussion shows that the increase of feature sizes makes wind-induced average response and fluctuating response larger correspondingly, and the proportion of resonant response also gradually increased, but it has little effect on the wind vibration coefficient. The increase of damping ratio makes resonant response and the wind vibration coefficient decreases obviously, which brings about no effect on average response and background response. The interference effect of surrounding buildings makes the fluctuating response and wind vibration coefficient increased significantly, furthermore, the increase ranges of resonant response is greater than background response.

• Journal of the Korean Home Economics Association
• /
• v.26 no.4
• /
• pp.31-41
• /
• 1988

The purpose of the present study was to test the behavior of dietary life, the preception of body image and the attitude of body weight control of the subjects, and to imagine difference of value evaluation about thirteen foods. the subjects were 570 high school students who were living in Seoul. The results can be summarized as follows: 1. In selecting actual and ideal body sizes from a series of five outline drawings of female figures that ranged form 20% underweight to 20% overweight, 64% of the subjects selected overweight drawing s as their actual sizes, and 85.1% of the subjects selected underweight ones as the ideal sizes. 59.3% of the subjects had a desire to lose weight, 20.8% to gain weight. Those who think they are thinner than standard body weight were more satisfied with their body sizes than those who think they are fatter than that. Most subjects (79.8%) were concerned about their weight control, and the majority of them (36.1%) began to take concerns about it in their high school days, through the conversation with their friends about their body sizes. 2. In this study, thirteen foods were chosen as samples; rice, bread, salad, milk, cola, cider, juice, duck-bok-ki, chocolate, batterfriend foods, chinese noodles, cookies, fruits. Most of them evaluated foods on the basis of the taste. They valued fruits over any other foods as least fattened food, while they thought of such foods as rice, cola, cider, ice-cream, chocolate, batter-fried food, chinese noodles as fattened foods.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.5
• /
• pp.691-702
• /
• 2002

The purpose of this study was to provide basic information on the propriety of the ready to wear garment sizes of Tween Generation(ages from 5th grade to 8th grade) who has different clothing preferences in color, styles, and design and also different body sizes and shapes from younger and older students. The objectives of the study were to ascertain (a) the body figure changes occurring during Tween Generation; (b) the coverage of manufactures'garment sizes. The body measurements of elementary school students(5th & 6th grades) and junior high school students(7th & 8th grades) provide the basic statistics for this study. The mean differences of each size within each figure type are compared by using t-teats. The differences in various manufacturers'apparel sizing and figure size are investigated. Also the body measurements and the apparel sizes of the manufacturers are compared in order to evaluate the suitability of the garment size. Results indicate that the body type factors are different in each age group. And manufactures'sizes come out to be much smaller than the actual body measurements. Young casual wear can cover junior high school students satisfactorily but for elementary school students, because of low drop-value, the overall satisfaction with filling is low.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.3
• /
• pp.185-193
• /
• 2021

This study was conducted to evaluate the performance of the octopus pot according to mesh sizes. Entering behavior of Octopus minor and bait (Macrophthalmus japonicus) escape rate on the mesh sizes of the pots were investigated for six times in indoor tank. The sea trials for evaluating the performance of Octopus minor pot to different mesh sizes (22, 20 and 18 mm) were conducted for six times from 2017 to 2018 in the coastal sea of Deukyang Bay, the Republic of Korea. Behavior patterns of contact pot to leaved pot were more frequent than contact pot to bait search. When the octopus contacted to the pot, there was no clear search behavior to distinguish the mesh sizes. Total catch of 46% was accounted for 18 mm pots, followed by 34% at 20 mm and 20% at 22 mm (P < 0.05). Catch per unit effort was calculated as 30 g/pot at 22 mm, 44 g/pot at 20 mm and 59 g/pot at 18 mm. As a result of evaluating 50% selection of mantle length and weight on the mesh sizes, mantle length (mm) and weight (g) were 84.6 and 147.8 in 22 mm, followed by 20 and 18 mm.

• The Journal of Korea Robotics Society
• /
• v.18 no.1
• /
• pp.29-36
• /
• 2023

This paper shows a design of a gripper with an adjustable working area to depalletize a delivery cardboard box of various sizes. The gripper should pick the box with only one flat surface to lift the boxes stacked close to each other. The lift force of the gripper is the vacuum suction force. To handle boxes of various sizes, the gripper adjusts the working area. The gripper operates four vacuum generators independently. The simultaneous rotation on different axes of four gripper-arms with suction cups moves the position of suction force. The six operation modes of the gripper are divided into the size of the working area. The operation mode is determined according to the size of the top side of the box. Experiments are conducted by lifting the box of various sizes. The gripper can pick the box of various sizes without vacuum leaks from unused cups. Also, the experiments verify the improvement of stability of the box by adjusting the working area of the gripper. The gripper can lift the box without deformation of the box by adjusting the working area.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1028-1033
• /
• 1991

This paper describes the design of a neural network estimator to estimate weld pool sizes for on-line use of quality monitoring and control in GMA welding processes. The estimator utilizes surface temperatures measured at various points on the top surface of the weldment as its input. The main task of the neural net is to realize the mapping characteristics from the point temperatures to the weld pool sizes through training, A series of bead-on plate welding experiments were performed to assess the performance of the neural estimator.