• Ocean and Polar Research
• /
• v.23 no.2
• /
• pp.109-119
• /
• 2001

Meiobenthic community structure of tidal flats near the Yeonggwang Nuclear Power Plant have studied during summer (June) and fall (October) 1997. Examination of sediment samples collected along the transects showed that there were 18 different types of meiobenthos in the study area. The most abundant meiobenthic animals belonged to Phylum Nematoda in both seasons and all transects. However, sediment samples collected near discharge areas, transects A and B, showed relatively lower abundance than other general coastal areas. Another abundant meiobenthic organism is benthic Harpacticoids which is very sensitive to any environmental changes. Polycheats and Ostracods were next abundant meiobenthos which also showed the difference between the study area and other general coastal areas. Only transect C maintained similar meiobenthic abundance and diversity to other coastal areas. Horizontal distribution for transects A and B showed higher densities in upper and mid tidal flat zones. On the other hand, transect C which is located furtherest from the discharges showed an increasing trend in abundance from upper to lower areas. For size distribution analyses showed that animals which fit into the meshsize of 0.125 mm were abundant, Vertical distribution of meiobenthic animals within the sediments for both sampling seasons showed the highest individual numbers in the surface sediment layers of 0-1 cm depth and showed a decreasing trend as sediment gets deeper. Each class of meiobenthos had different vertical profiles. When comparing survey transects A and B with other similar tidal flat areas, this sites seems to a very unstable environment of tidal flats near the Yeonggwang Nuclear Power Plant.

• Journal of Distribution Science
• /
• v.12 no.9
• /
• pp.101-112
• /
• 2014

Purpose - Recently, although corporate social responsibility activities have been increasing in size, they do not have to achieve qualitative improvements and can be passive and cost consuming. Therefore, companies should make quantitative as well as qualitative improvements in their efforts in corporate social responsibility activities. In this study, the classification of social responsibility activities in a variety of studies was analyzed through a more specific path than in previous studies. Corporate behavior image, social behavior image, and corporate contributions image were analyzed through a more detailed analysis of performance. This study suggests that more detailed and concentrated social responsibility activities be pursued by forming companies. Research design, data, and methodology - The purpose of study is to gauge the corporate need for a more intensive, specific area of CSR activities. For this purpose, the sample of consumers that were targeted for CSR activities, recognized as 261 persons, have been investigated. Through a theoretical discussion on previous research, nine hypotheses were established on corporate image, the influence of corporate performance on CSR, and the CSV regulation effect. In order to test the hypothesis, a survey was conducted on 261 male and female consumers who were targeted for CSR, being persons in their 20s to 40s. PASW Statistics 18.0 and AMOS 18.0 were used for statistical analysis. Results - Corporate behavior image was formed through legal responsibility activities and economic responsibility activities. In addition to economic responsibilities, ethical responsibilities and environmental responsibilities were confirmed to have influence on social behavior image. Corporate social responsibility and philanthropic responsibility were confirmed to have influence on economic contribution image. Corporate image has positive effects on brand attitude, corporate reputation, and corporate competition. In addition, when CSV awareness is high, consumers perceive corporate image only through economic responsibility. However, when CSV awareness is low, economic responsibility as well as legal responsibility through charitable activities form the corporate image that influences the brand attitude and corporate reputation, as well as corporate competitiveness. It would appear that the area of corporate social responsibility needs more intensive management for corporate image and corporate competitive advantage. Conclusion - First, the findings of this study show that each CSR activity has a different effect on corporate image and thus, the corporate image influences corporate performance in distinct ways, depending on the CSR activity. This implies that reactive strategies should be tailored to the required image. Second, there is a difference in CSV awareness between groups. When the CSV awareness is low, we can confirm that legal responsibility activities have an especially significant effect on corporate image, implying that corporations should pursue their economic objectives within legal regulations and need to invest significant time and effort for this. This study has limited generalization potential because the result of the model fit has insufficient reference value. In future research, we need to approach various dimensions of corporate performance.

• Radiation Oncology Journal
• /
• v.8 no.1
• /
• pp.115-124
• /
• 1990

The characteristics of 23 MV photon beam have been presented with respect to clinical parameters of central axis depth dose, tissue-maxi mum ratios, scatter-maximum ratios, surface dose and scatter correction factors. The nominal accelerating potential was found to be $18.5\pm0.5$ MV on the central axis. The half-value layer (HVL) of this photon beam was measured with narrow beam geometry from central axis, and it has been showed the thickness of $24.5\;g/cm^2$. The tissue-maximum ratio values have been determined from measured percentage depth dose data. In our experimental dosimetry, the surface dose of maximum showed only $9.6\%$ of maximum dose at $10\times10\;cm^2$, 100 cm SSD, without blocking tray in. The TMR'S of $0\times0$ field size have been determined to get average $2.3\%$ uncertainties from three different methodis; are zero effective attenuation coefficient, non-ilnear least square fit of TMR's data and effective linear attenuation coefficient from the HVL of 23 MV photon beams of dual energy linear accelerator.

• Journal of Chest Surgery
• /
• v.21 no.2
• /
• pp.254-269
• /
• 1988

52 cases of ventricular septal defect [VSD] associated with aortic insufficiency [Al] were found among 1271 patients with simple VSD operated during 27-year period [1959, August-1987, June] at Seoul National University Hospital. Their preoperative data, intraoperative findings and postoperative short-term and long-term follow-up data were evaluated to find the proper timing and method of surgical treatment. The result of this survey shows as follows: 1. To obtain the proper surgical indication, cardiac catheterization and angiography, especially root aortography, was essential. 2. Of all 52 patients, the VSD were type I in 40 patients [77%], type II in 8 [15%] and combination of type I and II in 4 [3%]. Patch closure of VSD were performed in 46 patients and direct suture closure of small VSD in 6. Most common pathologic findings of Al were prolapse of right coronary cusp [40 cases, 77%]. Aortic valve reconstruction were performed in 19 patients, aortic valve replacement in 6 and VSD closure alone in 27. 3. There were 3 surgical deaths [mortality 5.8%], and the long-term follow-up shows that VSD closure alone might have been sufficient to arrest progression of Al in younger patients [less than 10-year old], particularly in those with mild insufficiency. Valve reconstructions, when necessary, were more effective when done at an early age [less than 15-year old]. In a conclusion, we could recommend followings: 1. If patient at any age having VSD with Al is diagnosed, prompt operation is recommended. As for the surgical method, VSD closure only may be fit for mild degree of Al when patient is less than 10-year old, but the management of valve itself may be needed for moderate to severe degree of Al, especially when patient is over 10 year old. The management of valve itself may be variable, but valve reconstruction should be considered as a first choice in less than 15-year old patient. If patient is diagnosed less than 5-year old without evidence of Al, close follow-up observation is recommended. But if Al evidences of clinical findings and/or echocardiography during follow-up examination are notified, corrective operation should be accomplished while the Al is mild. If cusp prolapse and/or even type I VSD of significant size is demonstrated on aortogram, without Al, it should be corrected as early as possible before the patient is about 5 years old.

• Journal of Korea Water Resources Association
• /
• v.47 no.2
• /
• pp.161-170
• /
• 2014

It is important to estimate an appropriate quantile for design of hydraulic structure. For this purpose, it is necessary to find the appropriate probability distribution which can represent the sample data well. Probability plot correlation coefficient test as one of goodness-of-fit test, is recently developed and has been known as a simple and powerful method. In this study, probability plot correlation coefficient test statistics using the plotting position considering the coefficients of skewness for the GEV distribution is derived, and represented by the regression equation. Monte-Carlo method is also performed to compare the rejection power between each method. As the results, the probability plot correlation coefficient test which is derived in this study is better than the others. In particular, when sample size is small and distribution has the shape parameter, rejection power of probability plot correlation coefficient test considering the coefficients of skewness is bigger than the others.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.3
• /
• pp.33-41
• /
• 2020

Purpose : Conventional Balance Measurement can only measure the center of gravity and the shaking movement of the body. As a result, it has the disadvantages of not responding to visual changes and blocking functions of variables. This study was carried out to evaluate the performance of new equipment that measures the balance of the body using changes in body segment and pressure using the acceleration sensor to compensate for the disadvantages of the existing equipment. Methods : To this end, balance ability was measured in 43 healthy male/female adults without orthopedic injuries and nervous system damage in the last 6 months. in a situation where the visual information was restricted by Virtual Reality (VR) gear, all subjects measured and evaluated the balance ability utilizing the new equipment. Balance measurement (Prime Medilab, Korea) and Wii fit (Nintendo, Japan) were used to measure the balance ability of the subjects, and the balance ability test was performed in 4 postures using each device for data acquisition. The test duration for each posture was 30 seconds. For data acquisition, the average value of three experiments measured using each equipment was analyzed, and the statistical test was performed using the independent sample and the corresponding sample t-test, and the significance level was set to α=.05. Results : As a result of measuring the balance ability using individual equipment, blocking visual information using VR gear, the average speed, maximum speed, and moving area of the COP increased equally. It was found that the obtained absolute size of the result in Wii was somewhat larger than that of BM. Conclusion : It is considered that in the future research, it is necessary to measure changes in the body's center of gravity through image analysis, etc., to make clear comparison and evaluation of the usability.

• Journal of Biosystems Engineering
• /
• v.43 no.3
• /
• pp.237-246
• /
• 2018

Purpose: This study (a) investigated the effect of microwave power intensity and sample thickness on microwave drying characteristics of radish strips, and (b) determined the best-fit drying model for describing experimental drying data, effective moisture diffusivity ($D_{eff}$), and activation energy ($E_a$) for all drying conditions. Methods: A domestic microwave oven was modified for microwave drying and equipped with a small fan installed on the left upper side for removing water vapor during the drying process. Radishes were cut into two fixed-size strip shapes (6 and 9 mm in thickness). For drying experiments, the applied microwave power intensities ranged from 180 to 630 W at intervals of 90 W. Six drying models were evaluated to delineate the experimental drying curves of both radish strip samples. The effective moisture diffusivity ($D_{eff}$) was determined from Fick's diffusion method, and the Arrhenius equation was applied to calculate the activation energy ($E_a$). Results: The drying time was profoundly decreased as the microwave power intensity was increased regardless of the thickness of the radish strips; however, the drying rate of thicker strips was faster than that of the thinner strips up to a certain moisture content of the strip samples. The majority of the applied drying models were suitable to describe the drying characteristics of the radish strips for all drying conditions. Among the drying models, based on the model indices, the best model was the Page model. The range of estimated $D_{eff}$ for both strip samples was from $2.907{\times}10^{-9}$ to $1.215{\times}10^{-8}m^2/s$. $E_a$ for the 6- and 9-mm strips was 3.537 and 3.179 W/g, respectively. Conclusions: The microwave drying characteristics varied depending on the microwave power intensity and the thickness of the strips. In order to produce high-quality dried radish strips, the microwave power intensity should be lower than 180 W.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.27-35
• /
• 2007

Stainless steel crowns are invaluable restorative material for the treatment of badly broken down primary teeth in pediatric dentistry. But it is difficult to fit margin because selection of size is not easy and they are not adjusted for Korean children. The purpose of this study was to examine and analyze the marginal adaptation of stainless steel crown of posterior primary tooth. Marginal surface was taken by Fine Pix S602 digital camera and measurements of crown were recorded at 20 points that were randomly selected for marginal gap evaluation by Kappa image base program. 1. Mean marginal gap were large upper 2nd primary molar, lower 1st primary molar, lower 2nd primary molar, upper 1st primary molar in order(p<0.05). 2. Mean marginal surface dimension ratio was more than 20% irrespective of tooth. 3. Largest amount of marginal gap was shown at mesial surface in upper 1st, 2nd primary molar and distolingual surface in lower 1st primary molar, buccal surface in lower 2nd primary molar.

• Journal of Distribution Science
• /
• v.17 no.3
• /
• pp.85-95
• /
• 2019

Purpose - The existing marketing studies using Social Network Analysis have assumed that network structure variables are time-invariant. However, a node's network position can fluctuate considerably over time and the node's network structure can be changed dynamically. Hence, if such a dynamic structural network characteristics are not specified for virtual goods purchase model, estimated parameters can be biased. In this paper, by comparing a time-invariant network structure specification model(base model) and time-varying network specification model(proposed model), the authors intend to prove whether the proposed model is superior to the base model. In addition, the authors also intend to investigate whether coefficients of network structure variables are random over time. Research design, data, and methodology - The data of this study are obtained from a Korean social network provider. The authors construct a monthly panel data by calculating the raw data. To fit the panel data, the authors derive random effects panel tobit model and multi-level mixed effects model. Results - First, the proposed model is better than that of the base model in terms of performance. Second, except for constraint, multi-level mixed effects models with random coefficient of every network structure variable(in-degree, out-degree, in-closeness centrality, out-closeness centrality, clustering coefficient) perform better than not random coefficient specification model. Conclusion - The size and importance of virtual goods market has been dramatically increasing. Notwithstanding such a strategic importance of virtual goods, there is little research on social influential factors which impact the intention of virtual good purchase. Even studies which investigated social influence factors have assumed that social network structure variables are time-invariant. However, the authors show that network structure variables are time-variant and coefficients of network structure variables are random over time. Thus, virtual goods purchase model with dynamic network structure variables performs better than that with static network structure model. Hence, if marketing practitioners intend to use social influences to sell virtual goods in social media, they had better consider time-varying social influences of network members. In addition, this study can be also differentiated from other related researches using survey data in that this study deals with actual field data.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.6
• /
• pp.786-792
• /
• 2010

This paper presents a real-time lane detection method which can accurately find the lane-mark boundaries in complex road environment. Unlike many existing methods that pay much attention on the post-processing stage to fit lane-mark position among a great deal of outliers, the proposed method aims at removing those outliers as much as possible at feature extraction stage, so that the searching space at post-processing stage can be greatly reduced. To achieve this goal, a grid-based morphology operation is firstly used to generate the regions of interest (ROI) dynamically, in which a directional edge-linking algorithm with directional edge-gap closing is proposed to link edge-pixels into edge-links which lie in the valid directions, these directional edge-links are then grouped into pairs by checking the valid lane-mark width at certain height of the image. Finally, lane-mark colors are checked inside edge-link pairs in the YUV color space, and lane-mark types are estimated employing a Bayesian probability model. Experimental results show that the proposed method is effective in identifying lane-mark edges among heavy clutter edges in complex road environment, and the whole algorithm can achieve an accuracy rate around 92% at an average speed of 10ms/frame at the image size of $320{\times}240$.