• Fisheries and Aquatic Sciences
• /
• v.25 no.6
• /
• pp.350-356
• /
• 2022

This study aims to estimate the smallest size of mature individuals that can be exploited. Fish samples of Coryphaena hippurus were collected from Kalinaun fishermen's catches in the Molucca Sea. They were sexed, then the fork length (FL) and maturity stage were recorded. Results showed that C. hippurus in the Molucca Sea had a sex ratio of 1:1.94 (p < 0.05). Males had a length range of 499-831 mm FL and females were in the length range of 481-813 mm FL. Size at first maturity was estimated as 529 mm FL for males with a range of 475-588 mm FL and 405 mm FL for females. This study provided basic information for future management needs of the dolphinfish, especially in the Molucca Sea.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.1
• /
• pp.44-50
• /
• 1993

The suspended particulate matters had been collected by a cascade impactor having 9 size fragnated stages for 2 years (Dec. 1989 to Nov. 1991) in Kyung Hee University-Suwon Campus. The particulate matters were then collected on each stage by membrane filters. The weight concentration on each stage was estimated by a microbalance and further chemical element concentrations were determined by an XRF system. The study focused on developing of a receptor model using the TTFA (target transformation factor analysis) to apportion aerosol mass with the 30 ambient data sets. Each data set consists of the 8 size-ranged subdata sets characterized by 13 element variables. Even though a couple of sources could not be identified, three to five sources were extracted from each aerosol size-range, and then 9 statistical source profiles were generated. Finally, source contribution of particulate matters on each size-range could be estimated in Suwon area.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.8
• /
• pp.671-677
• /
• 2002

In this study, the high frequency SMD ceramic resonators with the size of $3.7{\times}3.1{\times}0.385\textrm{mm}^3$ were fabricated using $Pb_{0.88}(La_{0.6}Nd_{0.4})_{0.08}(Mn_{1/3}Sb_{2/3})_{0.02}Ti_{0.98}O_3$ ceramics with the variations of electrode radius size. With increasing the electrode radius size, resonant resistance in third overtone mode was decreased and electromechanical coupling factor($k_{t3}$) in third overtone mode was showed constant values. Taking into consideration mechanical quality factor($Qm_{t3}$) of 5,552 and dynamic range(D.R) of 60.72dB in third overtone mode, the ceramic resonator with the electrode radius size of $\theta$1.13mm was suitable for 20MHz resonator application.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.678-679
• /
• 2006

The effects of particle size on the surface properties of hydro-thermally synthesized barium titanate powders were investigated by means of particle size analysis, specific surface area, SEM, zeta potential and XPS. Particle sizes were measured by laser light scattering and are in the range of 150 to 1100nm. Zeta potential increased with increasing particle size and it was large minus value in the range of particle size from 500 to 900nm, which seems to be related with the dissolution of $Ba^{2+}$ ion in these particle sizes from the analysis of surface properties by XPS.

• Journal of Ecology and Environment
• /
• v.33 no.1
• /
• pp.3-13
• /
• 2010

The Tsushima leopard cat, Prionailurus bengalensis euptilurus, a small felid, inhabits only the Tsushima Islands in Japan. Previous studies of the Tsushima leopard cat revealed that natural factors; including sex, reproductive activity, season, and prey distribution and abundance affect leopard cat home range variation and habitat use. In this study, we focused on clarifying how anthropogenic factors influenced home range variation and habitat use of a male Tsushima leopard cat living near a suburban area in January, March, May and September 2005 using radio-tracking. The home range size (100% MCP) of this cat was $0.78\;{\pm}\;0.26\;km^2$ (mean ${\pm}$ SD, n = 4 tracking sessions) across the whole study period. However, the cat did not use all parts of its home range uniformly; rather it used some habitat types selectively. The cat avoided agriculture areas and residential areas in all of the tracking-sessions. On the other hand, the cat showed a weak preference for artificial structures and a strong preference for baiting sites in January and March, while it avoided them in May, and no baiting site was included in its home range in September. These results suggest that anthropogenic factors influenced the ranging patterns and habitat use of the leopard cat living near a suburban area. Artificial structures might provided good resting spaces for the cat in bad weather. When the density of its main prey was low in the winter, the cat tended to rely on artificial prey and had a small home range size.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.4
• /
• pp.366-376
• /
• 1999

In order to examine the catching selectivity of the ark shell(Scapharca broughtonii) dredge, the various factors affecting the selective action of the dredge are analyzed, and the probabilities of the ark shell not shifting through the gaps between the teeth, and the mesh of the netting bag, are calculated for the various shell lengths, using the relation between the posture and the length when the shell passes through these parts.Considering that the probability of making catch is the product of the both probabilities described above, and that this probability is proportional to the relative catching efficiency, the selectivity curves for the ark shell dredge were estimated for various gaps between the teeth and for the various mesh sizes of the netting bag. The obtained results are summarized as follows :1. The ratios of the shell length of ark shell to the distance between teeth indicating the relative catching efficiency of 0%, 50, 100% respectively were 1.0, 1.26~1.28, 1.47~1.44, and that the selection ranges of selective shell length by the distance between teeth were 0.47~0.44, where the distances between teeth were 3.2cm, 3.6cm, 4.0cm, 4.4cm and 4.8cm. 2. The ratios of the shell length of ark shell to the mesh size indicating the relative catching efficiency of 0%, 50%, 100% respectively were 0.67, 0.84, 0.97 and that the selection range of shell length for catching, that in the range of selective shell length by the mesh size was 0.31, where the distance of 4.0cm between teeth, mesh size of 6.0 cm and the smaller mesh angle of $60^{\circ}$3. Where the distance between teeth is 4.0 cm and the smaller mesh angle is $60^{\circ}$, the selection range of shell length for catching of the ark shell dredge is decreased according to the mesh size, and it is minimized by 0.20 in the mesh size of 9.0~10.0 cm, but increased in the mesh size of over 11.0 cm. 4. Where the distance between teeth is 4.0 cm, the selective action by the mesh size of netting bag is begun with the mesh size of over 10.0 cm.

• The Research Journal of the Costume Culture
• /
• v.8 no.4
• /
• pp.549-561
• /
• 2000

The purpose of this study was to survey and analyze the age classification of women customers as a target market and sizes on a label that were actually produced by each brand in Korean national brands ; they were classified into size for bodice and bottom, and compared with the distribution of national data of women's body measurement. They were analyzed and classified by brand groups of 'miss', 'missy', 'Mrs.'and 'madam', The results were ; 1) It was found that recent products for ready-made for women's clothes tend to be designed with target to the measured ages classified by the range of five or ten years. The main practice was that for 'miss'brand group the age range was of five years, and for 'missy'brand group, ten years. And for 'Mrs'and 'madam'brand groups, it was of 15 or 20 years. So that, it is necessary to design their clothes based on their features of body considering the intervals of age. 2) 'Mrs'and 'madam'groups were most remarkable for their distribution into a vast range of sizes for three control dimensions and waist girth size when compared to 'miss'and 'missy'groups. The distribution of brand size had no relation with that of body measurement, and in particular, none was produced for short height size between 145 and 150 ㎝. For tall height size between 175 and 180 ㎝, many brand sizes were distributed while body measurement was few. It means that distribution of brand size was different from real distribution of body measurement was few. It means that distribution of brand size was different from real distribution of body measurement as a result that the larger the bust girth in such cases over 160 ㎝, the larger the size of hip girth. Even as for the height 155 and 160 ㎝ in which body measurement is concentrated, there were many problems because while sizes of 'large'bust girth and 'small'hip girth had a large distribution, their clothes were not produced.

• Asian Journal of Atmospheric Environment
• /
• v.11 no.2
• /
• pp.96-106
• /
• 2017

In this study, measurements of size-segregated particulate matter (PM) emitted from the combustion of rice straw, pine needles, and sesame stem were conducted in a laboratory chamber. The collected samples were used to analyze amounts of organic and elemental carbon (OC and EC), water-soluble organic carbon (WSOC), humic-like substances (HULIS), and ionic species. The light absorption properties of size-resolved water extracts were measured using ultraviolet-visible spectroscopy. A solid-phase extraction method was first used to separate the size-resolved HULIS fraction, which was then quantified by a total organic carbon analyzer. The results show that regardless of particle cut sizes, the contributions of size-resolved HULIS ($=1.94{\times}HULIS-C$) to PM size fractions ($PM_{0.32}$, $PM_{0.55}$, $PM_{1.0}$, and $PM_{1.8}$) were similar, accounting for 25.2-27.6, 15.2-22.4 and 28.2-28.7% for rice straw, pine needle, and sesame stem smoke samples, respectively. The $PM_{1.8}$ fraction revealed WSOC/OC and HULIS-C/WSOC ratios of 0.51 and 0.60, 0.44 and 0.40, and 0.50 and 0.60 for the rice straw, pine needle, and sesame stem burning emissions, respectively. Strong absorption with decreasing wavelength was found by the water extracts from size-resolved biomass burning aerosols. The absorption ${\AA}ngstr{\ddot{o}}m $ exponent values of the size-resolved water extracts fitted between 300 and 400 nm wavelengths for particle sizes of $0.32-1.0{\mu}m$ were 6.6-7.7 for the rice straw burning samples, and 7.5-8.0 for the sesame stem burning samples. The average mass absorption efficiencies of size-resolved WSOC and HULIS-C at 365 nm were 1.09 (range: 0.89-1.61) and 1.82 (range: 1.33-2.06) $m^2/g{\cdot}C$ for rice straw smoke aerosols, and 1.13 (range: 0.85-1.52) and 1.83 (range: 1.44-2.05) $m^2/g{\cdot}C$ for sesame stem smoke aerosols, respectively. The light absorption of size-resolved water extracts measured at 365 nm showed strong correlations with WSOC and HULIS-C concentrations ($R^2=0.89-0.93$), indicating significant contribution of HULIS component from biomass burning emissions to the light absorption of ambient aerosols.

• Journal of Environmental Science International
• /
• v.12 no.10
• /
• pp.1043-1054
• /
• 2003

During the period from April to September 2002, the size distributions of ambient aerosol were measured at the coastal site at Hamduk in Jeju Island. Na$\^$+/, K$\^$+/, Mg$\^$2+/, Ca$\^$2+/and Cl$\^$-/ exhibited mostly a bimodal coarse mode size distribution, while ammonium and sulfate were mainly in the fine size range, with maximum at around 0.54$\mu\textrm{m}$. The average molar concentration ratio of ammonium to sulfate for fine particles was equal to 2.0${\pm}$0.9. Nitrate was evenly found in both the coarse and fine modes. Elements like Al, Fe, Cu, Mg, Na, Ti, Sr and Mn were dominant in coarse particles, with the maximum at around 5.25$\mu\textrm{m}$. S and Pb were mainly in the submicrometer size range. Other elements with a fine and coarse modes were V, Ni, Cu, Ba and Mo. The patterns of the size distributions of trace elements measured at the downtown in Jeju City were very similar to those at the coastal site in Hamduk. However, the amplitude of size fractional concentrations at Jeju City was narrower than that at Hamduk. While the mass median diameters for the chemical species originated from the natural origin such as marine and crust were relatively large, those for ammonium, sulfate, S and Pb were very small.

• The Research Journal of the Costume Culture
• /
• v.31 no.3
• /
• pp.296-309
• /
• 2023

This study gathered basic information on the development of Jiu-Jitsu uniforms suitable for players in Korea. Detailed data were collected between December 20^th and December 30^th, 2022 on 21 selected brands sold in online shopping malls. For each, information was recorded on the production country, product type, price, colors, material, and sizing system. A total of 612 datasets were analyzed using frequency analysis, cross-tabulation, and Chi-square tests. Jiu-Jitsu uniforms were classified as either standard or limited edition. Limited edition uniforms were more expensive than regular uniforms. International brands had a higher price range than domestic brands. The most commonly used colors for Jiu-Jitsu uniforms were the regulation colors associated with the sport: white, black, and blue. Domestic brands were more likely to use non-regulation colors than international brands. The material used for the top half of the uniform was predominantly pearl weave, while the bottom half was usually ripstop. International brands used a more diverse range of materials than domestic brands. The Jiu-Jitsu uniform sizing system incorporated a range of sizes between A00 and A6. While sizing designations differed according to the established sizing systems of different countries, the sizes remained the same, as did the range of sizes available. Where size guides were provided, height and weight were used to help the customer determine the appropriate size. The dimensions of each size varied between brands. Overall, we found that international brands offer a more diverse range of Jiu-Jitsu uniform designs than domestic brands.