• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.6
• /
• pp.675-681
• /
• 2015

When many holes on a plane are machined simultaneously, the positional precision and machining efficiency are very important. Multi-spindle heads are typical order making products of which the number of shafts and hole positions vary depending on the size or form of the product. For the automatic design of multi-spindle heads, the design modules for power transmission systems for drive, idle, and spindle shafts were developed, and a design technique the determining the optimum position and number of idle shafts according to gear positions was developed. In addition, for the precise determination of the multi-spindle head, the design methods for the guide planes of columns, and feed mechanisms were devised. In addition, the design modules for accurate clamping and automatic transportation mechanisms were developed. Finally, in order to simplify and standardize the design process, the design analysis and simulation verification modules are integrated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.304-307
• /
• 2002

High speed machining was accomplished. through the technological advances which covers the whole field of mechanical industry. But tapping have many troubles because of its complicate cutting mechanism, for example. tool damage, chip elimination and synchronization between spindle rotation and feed motion. But High speed tapping is so important that it marches in step with the flow of the times and make improvement in the productivity. In this paper we analyze mechanism of high speed synchronized tapping with the signal of tapping torque and spindle speed obtained through the newly developed high speed tapping machine(NTT-30B). We made an experiment with this machine on condition of various speed from 1000rpm to 10000rpm. As one complete thread is performed through the whole chamfer cutting, cutting torque increases highly in chamfer cutting, but smoothly in full thread cutting functioning of the threads guide. And the size of cutting torque according to spindle speed(rpm) was not enough of a difference to be conspicuous.

• Journal of Sensor Science and Technology
• /
• v.18 no.6
• /
• pp.461-466
• /
• 2009

This paper represents a piezoelectric ultrasonic linear actuator with flexural vibration mode. The actuator is composed of two piezo ceramics, the elastic body, and the connecting tip. It is driven by the frictional force between the connecting tip and the linear motion guide. Unimorph actuators have flexural vibration. Its middle point is fixed so that suitable to the flexural vibration of $3/2\lambda$. These vibrations contribute to elliptical motion by mixed mode between longitudinal and transverse mode. It was generated when the ultrasonic electrical signals with 90 degree phase difference are applied to two ceramics. A linear movement can be easily obtained using the elliptical motion. The ATILA, FEM simulator has been used to design actuator and verify the kinetic and dynamic analysis. We used the ceramics of $20\times10\times1$ mm size and confirmed the flexural vibration of the $3/2\lambda$ at the 79 kHz through the scanning of 3D-vibrometer. The maximum velocity of actuator was 221 mm/sec and the thrust force of actuator was 2.7 N in 200Vp-p of additional voltage.

• The Journal of the Korean dental association
• /
• v.58 no.3
• /
• pp.152-168
• /
• 2020

The propensity score matching method is a statistical method used to reduce selection bias in observational studies and to show effects similar to random allocation. There are many observational studies in dentistry research, and differences in baseline covariates between the control and case groups affect the outcome. In order to reduce the bias due to confounding variables, the propensity scores are used by equating groups based on the baseline covariates. This method is effective, especially when there are many covariates or the sample size is small. In this paper, the propensity score matching method was explained in a simple way with a dental example by using R software. This simulated data were obtained from one of retrospective study. The control group and the case group were matched according to the propensity score and compared before and after treatment. The propensity score matching method could be an alternative to compensate for the disadvantage of the observation study by reducing the bias based on the covariates with the propensity score.

• 한국기계연구소 소보
• /
• s.19
• /
• pp.125-139
• /
• 1989

As an adaptive control function generator, the CMAC (Cerebellar Model Arithmetic or Articulated Controller) based learning control has drawn a great attention to realize a rather robust real-time manipulator control under the various uncertainties. There remain, however, inherent problems to be solved in the CMAC application to robot motion control or perception of sensory information. To apply the CMAC to the various unmodeled or modeled systems more efficiently, it is necessary to analyze the effects of the CMAC control parameters on the trained net. Although the CMAC control parameters such as size of the quantizing block, learning gain, input offset, and ranges of input variables play a key role in the learning performance and system memory requirement, these have not been fully investigated yet. These parameters should be determined, of course, considering the shape of the desired function to be trained and learning algorithms applied. In this paper, the interrelation of these parameters with learning performance is investigated under the basic learning schemes presented by authors. Since an analytic approach only seems to be very difficult and even impossible for this purpose, various simulations have been performed with pre specified functions and their results were analyzed. A general step following design guide was set up according to the various simulation results.

• Korean Journal of Human Ecology
• /
• v.20 no.5
• /
• pp.1059-1074
• /
• 2011

The purpose of this study is to provide a practical guide for planning the private and shared space of student housing for one person household by analyzing their satisfaction and preference. The data was collected through a questionnaire-survey from the students of the university in the city of Cheongju, Chungbuk. 191 samples were collected and analyzed by using SPSS-PC. The results are as follows: (1) this survey showed that most students are dissatisfied with private and shared spaces to narrow size, an unpleasant indoor environment, and incomplete facilities. (2) The most preferred housing type is an officetel in one room style because of its convenience. The majority of students preferred a bedroom, bathroom, kitchen and dining room in personal preferential order with a wide room, well-ventilated environment, and reasonable space zoning for planning the private space. Broad personal spaces with shared spaces such as a study room, cafeteria and health zone are in demand for unit planning. Therefore, to provide privacy for personal living and to develop community spirit, there needs to be a movement to better for community living by arranging optional shared spaces.

• Journal of the Korean Society of Systems Engineering
• /
• v.2 no.2
• /
• pp.27-32
• /
• 2006

The emerging standards since 1990's can be classified as 'system standards' (process-oriented standards) and they specify the process of an enterprise and also apply to almost all industries regardless of size, type and products. Notice that the conventional specification-oriented standards present relatively clear criteria even though the structure, performance, and terminology are defined in text-based form. However, the system standards dealing with the processes do not present a coherent guide. Therefore, it is difficult to analyze them with the same viewpoint, thereby resulting in differences in the level of understanding. This study is aimed at graphically modeling the system standards originally described in text-based form. The study has been carried out in the framework of the PMTE (Process, Methods, Tools, and Environment) paradigm. The system standard targeted here is ISO/IEC 15288. Firstly, review of the literature on the systems engineering (SE) standard/process and on the graphic model IDEF0 was done, respectively, for the parts of 'E' and 'M'. Then the SE process of the MIL-STD 499B was applied to ISO/IEC 15288 as 'P'. Finally, the graphical model was generated by AI0Wins as 'T'. As a result, the graphical model-based approach can complement the drawbacks of the text-based form.

• The Journal of Asian Finance, Economics and Business
• /
• v.5 no.1
• /
• pp.53-62
• /
• 2018

The study aims to conduct organizational diagnosis at Infosys and to suggest measures of improvement of the same wherever necessary. Data was collected with the help of a structured questionnaire. Respondents were selected with the help of random sampling technique. The sample size is 19. The employees are not much clear about their goals and the purpose of the organization. The employees are not satisfied with the current structure and the division of the work in the organization, and also with the current reward mechanism of the organization. However the employees are satisfied with their leaders and their leadership styles. The employees feel that they share a good relationship with their peers. The employees of Infosys have full confidence in the management and they believe that the management is helping them in their career growth. Some of the interventions suggested are as follows: Role Analysis Technique can be used so that the employees get clarity of their goals. As the score suggests that the employees are not happy with the current structure and distribution of the work, mentors can be assigned to the employees who can guide them and can also help the employees to understand the structure and processes better.

• Journal of Korea Game Society
• /
• v.6 no.4
• /
• pp.89-95
• /
• 2006

The game has both directionalities that users are to choose and act accordingly. In this regard, the game scenario goes beyond just conveying the story, and trains users and guide them in playing the Same. However, this Same scenario is huge in size and every event is linked with each other so that it was rather difficult to have it made in practice. A study proposes that a script, the minimum unit, is built into a database, and based on which, quests are made, then the resulting quests are built back into a database. Scripts are classified into text, graphic and sound type and these are positioned in accordance with the quest structure. With this method, one can re-use the existing scenarios and can overcome the negatives of irregular qualities of scenarios.

• Journal of the Korean Ceramic Society
• /
• v.36 no.5
• /
• pp.483-489
• /
• 1999

Gas pressure sintered silicon nitride based composites with 3 wt% $\beta$-Si3N4 whiskers were prepared and change of properties according to the whisker orientation and sintering temperature was studied. The tapes with whiskers were fabricated by two different method ; conventional tape casting and a modified tape casting by using guide pins,. Orientations of the whiskers were controlled by different stacking sequences of the sheets cut from the tape. Samples were fully densified by gas pressure sintering at 2148-2273K. As the sintering temperature increased size of the large elongated grains increased. In case of unidirectional samples sintering shrinkage normal to the whisker alignment direction was larger than that of parallel to the direction and the shrinkage anisotropy increased slightly as sintering temperature increased. As sintering temperature increased the crack length parallel to whisker alignment direction became shorter but that normal to the direction did not depend on sintering temperature. In case of cross-plied samples the anisotropy of mechanical properties disappeared.