• 국제초고층학회논문집
• /
• 제3권3호
• /
• pp.215-221
• /
• 2014

Ultra-high strength concrete and high tensile steel are becoming very attractive materials for high-rise buildings because of the need to reduce member size and structural self-weight. However, limited test data and design guidelines are available to support the applications of high strength materials for building constructions. This paper presents significant findings from comprehensive experimental investigations on the behaviour of tubular columns in-filled with ultra-high strength concrete at ambient and elevated temperatures. A series of tests was conducted to investigate the basic mechanical properties of the high strength materials, and structural behaviour of stub columns under concentric compression, beams under moment and slender beam-columns under concentric and eccentric compression. High tensile steel with yield strength up to 780 MPa and ultra-high strength concrete with compressive cylinder strength up to 180 MPa were used to construct the test specimens. The test results were compared with the predictions using a modified Eurocode 4 approach. In addition, more than 2000 test data samples collected from literature on concrete filled steel tubes with normal and high strength materials were also analysed to formulate the design guide for implementation in practice.

• 한국수소및신에너지학회논문집
• /
• 제26권1호
• /
• pp.1-7
• /
• 2015

In this study, characteristics of reforming process of automotive liquefied petroleum gas (LPG) fuel using plasma reactor are investigated. Because plasma reformer technology has advantages of a fast start-up and wide fuel/oxidizer ratio of operation, and reactor size is smaller and more simple compared to typical combustor and catalytic reactor, plasma reforming is suitable to the on-board vehicle reformer. To evaluate the characteristics of the reforming process, parametric effect of $O_2/C$ ratios, reactant flow rate and metal form on the process were investigated. In the test of varying $O_2/C$ ratio from partial oxidation to stoichiometry combustion, conversion of LPG was increased but selectivity of $H_2$ decreased. The optimum condition of $O_2/C$ ratio for the highest $H_2$ yield was determined to be around 1.0 for 20~50 lpm, and 1.35 for 100 lpm. Specific energy density (SED) was major factor in reforming process and higher SED leads to higher $H_2$ yield. And metal form in the reformer increased $H_2$ yield of about 34 % as compared to the case of no metal form. The result can be a guide to map optimal condition of reforming process.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.675-681
• /
• 1989

As an adaptive control function generator, the CMAC (Cerebellar Model Arithmetic or Articulated Controller) based learning control has drawn a great attention to realize a rather robust real-time manipulator control under the various uncertainties. There remain, however, inherent problems to be solved in the CMAC application to robot motion control or perception of sensory information. To apply the CMAC to the various unmodeled or modeled systems more efficiently, It is necessary to analyze the effects of the CMAC control parameters an the trained net. Although the CMAC control parameters such as size of the quantizing block, learning gain, input offset, and ranges of input variables play a key role in the learning performance and system memory requirement, these have not been fully investigated yet. These parameters should be determined, of course, considering the shape of the desired function to be trained and learning algorithms applied. In this paper, the interrelation of these parameters with learning performance is investigated under the basic learning schemes presented by authors. Since an analytic approach only seems to be very difficult and even impossible for this purpose, various simulations have been performed with prespecified functions and their results were analyzed. A general step following design guide was set up according to the various simulation results.

• Spatial Information Research
• /
• 제15권2호
• /
• pp.95-109
• /
• 2007

최근 도로네트워크 환경에서 위치기반 서비스를 제공하는데 있어서 2차원 공간 데이터를 기반으로 하고 있다. 3차원 데이터는 사용자에게 2차원 보다 친근감을 주는 중요한 매체가 되지만, 데이터의 크기가 커지기 때문에 이동단말기의 메모리 공간의 한계로 모든 데이터를 저장할 수 없게 되는 문제점이 발생한다. 본 논문에서는 도로네트워크에서 이동객체에게 3차원 데이터를 제공할 수 있는 연속원근질의를 정의하고 이를 처리하는 방법론을 제안하였다.

• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.138-145
• /
• 2017

With the increasing use of smart electronic devices, the size of the related I/O interface market is increasing rapidly. Demand is also growing for the continuous increase of data and video signals-such as faster data processing speed and data storage capacity-in the smart electronic device input/output interface market. Currently, the POF hybrid cable used in the smart electronic device input / output interface market cannot transmit over a long distance because the optical loss is too large, and the GOF hybrid cable is both vulnerable to bending and other sudden outside changes, and expensive. Therefore, in this study, the design and fabrication of a GOF hybrid cable and fiber guide were carried out in order to develop a cable which can easily withstand external impact, has low optical losses, and meets the demand for continuous data and video signal increase in the smart electronic device input / output interface market.

• Advances in concrete construction
• /
• 제10권5호
• /
• pp.417-429
• /
• 2020

Waste glass is a global solid waste with huge reserves. The discarded waste glass has caused a series of problems such as resource waste and environmental pollution, so it is urgent to recycle waste glass with high replacement level. Glass powder (GP), as a supplementary cementitious material (SCM), used in cement-based materials has already become one of the important ways to recycle waste glass mainly attributed to its pozzolanic reaction and filling effect, especially to the suppressed ASR expansion. This paper demonstrates an overview of the properties of GP and its effect on the fresh and mechanical properties of cement-based materials. The study found that the influence of GP on the performance of cement-based materials mainly depends on its content, particle size, color and type, curing conditions, and other SCMs. Finally, based on the problems involved in the investigation of concrete containing GP, some corresponding suggestions and efforts are given to further guide the utilization of GP in cement-based materials.

• 소성∙가공
• /
• 제16권1호
• /
• pp.42-47
• /
• 2007

LCD-BLU is one of kernel parts of LCD and it consists of several optical sheets: LGP, light source and mold frame. The LGP of LCD-BLU is usually manufactured by etching process and forming numerous dots with $50\sim300{\mu}m$ diameter on the surface. But the surface of the etched dots of LGP is very rough due to the characteristics of the etching process during the mold fabrication, so that its light loss is high along with the dispersion of light into the surface. Accordingly, there is a limit in raising the luminance of LCD-BLU. In order to overcome the limit of current etched dot patterned LGP, optical pattern with continuous microlens was designed using optical simulation CAE. Also, a mold with continuous micro-lens was fabricated by UV-LiGA reflow process and applied to 7 inch size of navigator LCD-BLU in the present study.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.1-6
• /
• 2009

The paper describes results of a sensitivity study on an optimum mooring cost as a function of safety factor and allowable maximum offset of the offshore floating structure by finding the anchor leg component size and the declination angle. A harmony search (HS) based mooring optimization program was developed to conduct the study. This mooring optimization model was integrated with a frequency-domain global motion analysis program to assess both cost and design constraints of the mooring system. To find a trend of anchor leg system cost for the proposed sensitivity study, optimum costs after a certain number of improvisation were found and compared. For a case study a turret-moored FPSO with 3 ${\times}$ 3 anchor leg system was considered. To better guide search for the optimum cost, three different penalty functions were applied. The results show that the presented HS-based cost-optimum offshore mooring design tool can be used to find optimum mooring design values such as declination angle and horizontal end point separation as well as a cost-optimum mooring system in case either the allowable maximum offset or factor of safety varies.

• 복식문화연구
• /
• 제15권1호
• /
• pp.68-80
• /
• 2007

Surrealism's method of expression and inspiration has been a continuous influence on fashion. What is important is how to identify and research a source of inspiration, and how to use this inspiration to guide the designs that can be worn on a real human body. Therefore, the purpose of this study was to show how to develop ideas and designs from Surrealist objects and how to contribute to the development of designs to the diversity in visual and functional effects along with the changes in consumer's interest. Documentary studies about Surrealism and Surrealist-inflected fashion applying the works of Surrealist and fashion images as a tool of historical research were proceeded. And the ideas for theme, the motifs for print patterns, and the concept of designs were borrowed from Surrealist objects touching on the imagery between the real and reflected, optical and artificial, and the designs were developed with several different visual and functional effects changing color, pattern, size, and length with the function of zippers in each item. It also gives the person wearing it amusement because it includes the concept of play and D.I.Y. With effective planning, it is possible to attract consumer's interest in the market.

• The Korean Journal of Pain
• /
• 제9권1호
• /
• pp.210-214
• /
• 1996

Thoracic sympathetic ganglion block(TSGB) with alcohol is a traditional method for treating a variety of disease at pain clinics. But it is a difficult block to perform requiring both skill and experience. Therefore, we performed a thoracic endoscopic cauterization to evaluate the efficacy of this method. A patient suffering sever forearm and hand pain due to radius fracture of the right arm, one and half years earlier, was referred to several different orthopaedic department of various hospitals with continued aggravated symptoms. He was then admitted to our hospital's orthopaedic department. Our diagnosis, confirmed by thermography, revealed reflex sympathetic dystrophy. Patients was therefore referred to the pain clinic where treatment consisted of endoscopic thoracic sympathetic cauterization under general anesthesia. Patient was intubated with Robertashow 37 Fr. double lumen tube left sided. Left lateral and slight head up position was applied to make lesion side up. Incisions were made to penetrate trocas 5 mm diamether on 4 th intercostal space along mid axillary line and midclavicular line. Negative pressure suction on ipsilateral lung and CO2 insufflation under 10 mmHg was applied to reduce lung size. Cauterization on thoracic sympathetic chain at T3 level was done under endoscoic guide. 24 Fr. chest tube was inserted. Patient's symptoms cleared and he was satisfied with the results of this treatment.