• Journal of ILASS-Korea
• /
• v.5 no.3
• /
• pp.37-44
• /
• 2000

High velocity, gas-assisted liquid drop trajectories were investigated under well-controlled experimental conditions at elevated gas densities and room temperature. A monodisperse stream of drops which are generated by a vibrating-orifice drop generator were injected into a transverse high velocity gas stream. The gas density and air jet velocity were adjusted independently to keep the Weber numbers constant. The Weber numbers studied were 72, 148, 270, 532. The range of experimental conditions included studied the three drop breakup regimes previously referred as bag, stretching/thinning and catastrophic breakup regimes. High-magnification photography and conventional spray field photographs were taken to study the microscopic breakup mechanisms and the drop trajectories in high velocity gas flow fields, respectively. The parent drop trajectories were affected by the gas density and the gas jet velocities and do not show similarity with respect to the either Weber or the Reynolds number, as expected.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.2
• /
• pp.81-88
• /
• 2002

Transmission of 3D shape model through Internet has become one of the hottest issues in these days. Presented in this paper is a new approach for the rapid transmission of the geometry data of the shape model. By analyzing the important three factors, the shape fidelity, the file size, and the decompression time, for the compression, we point out the potential problems of previous approaches of using the deltas between consecutive vertices and propose an alternative of directly using the position values of vertices of the model. It turns out that the proposed approach has smaller file size, has lesser distortion in the model, and the decompression is faster.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.265-268
• /
• 2010

There have been proposed two types of low bit rate vocoder upto now : One is MBE type using the spectrum modeling and another is CELP type using the hybrid coding method. CELP type vocoder has mainly studied between them. Specially, much of intensity is concentrated in CELP vocoder due to the emergence of Internet Phone and PCS in a domestic. In order to improve the speech quality in CELP vocoder, in this paper, we proposed a new spectrum analysis algorithm with variable window. In CELP vocoder, the spectrum of the synthesised speech signal is distorted because the fixed size windows is used for spectrum analysis. So we have measured the spectral leakage and in order to minimize the spectral leakage have adjusted the window size. Applying this method G.723.1 ACELP, we can get SD(Spectral Distortion) reduction 0.084(dB), residual energy reduction 6.3% and MOS(Mean Opinion Score) improvement 0.1.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.4
• /
• pp.191-199
• /
• 2018

The harmonic reduction method of ac motor drive, ACL and DCL were commonly used, but the current distortion ratio was only 35%, thus the several different types of filters as BBHF(broad band harmonic filter), HHF(hybrid harmonic filter), NHHF(new hybrid harmonic filter) have been developed to satisfy the IEEE Std. 519 harmonic limitation. However, these filters had been limited marketability due to cost and size problems. This study suggests the methods to reduce cost and size of the harmonic filter including topologies, besides we discussed simulation results of the power system with regard to the implementation and performance of the filters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1103-1109
• /
• 2014

The motion recognition system has been broadly studied in digital image and video processing fields. Recently, method using th depth image is used very useful. However, recognition accuracy of depth image based method will be loss caused by size and shape of object distorted for angle of the depth sensor. Therefore, distortion correction of depth sensor is positively necessary for distinguished performance of the recognition system. In this paper, we propose a pre-processing algorithm to improve the motion recognition system. Depth data from depth sensor converted to real world, performed the corrected angle, and then inverse converted to projective world. The proposed system make progress using the OpenCV and the window program, and we test a system using the Kinect in real time. In addition, designed using Verilog-HDL and verified through the Zynq-7000 FPGA Board of Xilinx.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.5036-5041
• /
• 2010

This paper introduces the complex-version of an Euclidean distance minimization algorithm based on a set of delta functions. The algorithm is analyzed to be able to compensate inherently the channel phase distortion caused by inferior complex channels. Also this algorithm has a relatively small size of Gaussian kernel compared to the conventional method of using a randomly generated symbol set. This characteristic implies that the information potential between desired symbol and output is higher so that the algorithm forces output more strongly to gather close to the desired symbol. Based on 16 QAM system and phase distorted complex-channel models, mean squared error (MSE) performance and concentration performance of output symbol points are evaluated. Simulation results show that the algorithm compensates channel phase distortion effectively in constellation performance and about 5 dB enhancement in steady state MSE performance.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.153-160
• /
• 2014

The Streganography method for digital images has to insert secret data into the image without image distortion. Side match method is that size of secret data is calculated by difference of embedded pixel value and mean value of side pixels. And the secret value is embedded into the embedded pixel. Therefore, the more secret data increases, the more image distortion increases, too. In this paper, we propose the enhanced method that calculates embedded pixel value by difference of secret value and mean value of side pixels. In proposed method, more secret data is embedded and image distortion has to decreases.

• Journal of Fashion Business
• /
• v.21 no.5
• /
• pp.136-150
• /
• 2017

3D printing has grown tremendously as the most noteworthy new technology in the manufacturing industries. In addition, the rapid development of computer science technology with 3D printing has created a new paradigm called Fractal Geometry, or a new form of digital art. This study explores the formative characteristics of 3D printing jewelry based on presentation of fractal geometry by classification of 3D printing jewelry's morphological types that except for producible shape with traditional mold manufacturing methods. The results of the study are as follows. The morphological characteristics of 3D printed jewelry are divided into their constitutive shapes by the repetition of the unit. The organic shape determined by superposition or overlapping, the systematic shape by distortion caused by distortion, and the variation in scaling by scaling. The formative characteristics, which are drawn from a study on the shape expression of 3D printed jewelry design using fractal geometry, consist of continuity, geometrical characteristics, and exaggeration. Continuity creates a new and self-assigned new space through a recursive structure through a cyclic structure that is formed along a single directional basis. The geometry of the geometry forms a three-dimensional and constructive structure comprised of the same size and structure of the same sized unit under the mathematical order of the geometry of Fractal's geometry. Exaggeration demonstrates the informal beauty and the maximization of the shape by expanding the scaling or superposition of a unit, by scaling the scale or he distortion of the units.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.49-60
• /
• 2012

In this paper, we propose a hardware design for correction of barrel distortion using the nearest coordinates in the corrected image. Because it applies the nearest distance on corrected image rather than adjacent distance on distorted image, the picture quality is improved by the image whole area, solve the staircase phenomenon in the exterior area. But, because of additional arithmetic operation using design of bilinear interpolation, required arithmetic operation is increased. Look up table(LUT) structure is proposed in order to solve this, coordinate rotation digital computer(CORDIC) algorithm is applied. The results of the synthesis using Design compiler, the design of implementing all processes of the interpolation method with the hardware is higher than the previous design about the throughput, In case of the rear camera, the design of using LUT and hardware together can reduce the size than the design of implementing all processes with the hardware.

• Journal of Broadcast Engineering
• /
• v.21 no.3
• /
• pp.341-348
• /
• 2016

HEVC is the next compression standard and is expected to be used widely replacing the conventional H.264/AVC standard. The compression ratio of the HEVC is twice times than H.264/AVC, whereas its computational complexity is increased by up to 40%. Many research efforts have been made to reduce the computational complexity and to speed up encoding. For intra coding, the rough mode decision (RMD) is commonly applied. The rate-distortion optimization (RDO) process to decide the best mode is too complex so that RMD chooses the candidate modes with a simple process and sends the candidates to RDO process. However, for large-size blocks, the RMD also requires considerable computations. In this paper, a down-sampling scheme is proposed for the RMD process. The reference pixel loading, predicted pixel generation are performed using the down-sampled pixel data. When the proposed scheme is applied to the RMD, the computational complexity is reduced by 70% with a marginal bitrate increase of 0.04%. In terms of area of hardware-based RMD, the gate count and the buffer size is reduced 33% and 66%, respectively.