• Structural Engineering and Mechanics
• /
• v.43 no.6
• /
• pp.795-821
• /
• 2012

The size and topology of geometrically nonlinear dome structures are optimized thereby minimizing both its entire weight & joint (node) displacements and maximizing load-carrying capacity. Design constraints are implemented from provisions of American Petroleum Institute specification (API RP2A-LRFD). In accordance with the proposed design constraints, the member responses computed by use of arc-length technique as a nonlinear structural analysis method are checked at each load increment. Thus, a penalization process utilized for inclusion of unfeasible designations to genetic search is correspondingly neglected. In order to solve this complex design optimization problem with multiple objective functions, Non-dominated Sorting Genetic Algorithm II (NSGA II) approach is employed as a multi-objective optimization tool. Furthermore, the flexibility of proposed optimization is enhanced thereby integrating an automatic dome generating tool. Thus, it is possible to generate three distinct sphere-shaped dome configurations with varying topologies. It is demonstrated that the inclusion of brace (diagonal) members into the geometrical configuration of dome structure provides a weight-saving dome designation with higher load-carrying capacity. The proposed optimization approach is recommended for the design optimization of geometrically nonlinear dome structures.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.527-532
• /
• 2004

An effective balancing method for mil compressors is developed based on vibration plane model. By assuming the design range of balancer size is not large and considering only the radial axial direction rigid vibration of the mil compressors, we can find the vibration plane (V-plane) describing the vibration level of the scroll compressor depending upon balancer design specifications. By in the intersection of two minimum lines (areas) obtained from the couple of V-Planes we can find the design lesion to minimize vibration level of the compressor. The full design process is described by using an illustrative example with upper and lower balancer weights. Further more sensitivity analysis of parameters important for designation of size and positioning of the balancer is analyzed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.6 s.154
• /
• pp.892-903
• /
• 2006

This study was to carry out interview and survey of currently marketed foundation garment, focusing on manufacturers, on the basis of data of Year 2004 SIZE KOREA in 2004, to re-establish suitable age range and standard size, to simplify size interval scale and size system and to revise the standard for consumers' easy understanding and availability; The findings of this study are as follows. 1. Considering the age, in which a bra is worn, has reduced socially, the applicable age range was expanded into $8{\sim}80$ years old, which was divided into for junior and for adult. 2. For bra size, the standard title changed into the foundation garments size standard, in which girdle and bodysuit were included. 3. Basic physical parts for establishing for bra size are underbust and bust. Interval scale of under bust and bust was 5cm and 2.5cm, respectively. And basic physical parts are waist and hip girth for girdle, and underbust, bust, and hip girth for bodysuit. 4. For bra size, underbust girth was applied together with bra-cup size without 'cm' unit. For bra-cup size, difference between underbust and bust was represented as English alphabet. In other words, AAA means that difference between under bust and bust is 5cm. AA, A, B, C and D means that the difference are 7.5cm, 10cm, 12.5cm, 15cm and 17.5cm. 5. For girdle size, waist girth was applied together with hip girth without 'cm' unit. And for bodysuit size, underbust girth was applied together with cup size like bra size, and English alphabet represented hip girth range.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.44-54
• /
• 2024

In this study, the sizing systems of 40 unisex sweatshirt brands were analyzed to collect the size information needed to produce unisex clothing. Each size specification was compared with the body size distribution and percentiles of men and women aged 18 to 29. Depending on the brand, unisex sweatshirt sizes ranged from 1 to 8. Despite being unisex apparel, three brands offered only one or two sizes. Out of the brands surveyed, 50% were found to offer four or five sizes. Out of the 40 brands, 25 used letters such as "S," "M," and "L" to indicate the size designation. More than 92.5% of the brands included M and L, and the sizing system tended to focus on larger sizes such as XL and 2XL rather than smaller sizes such as XS and S. The size specifications of shoulder width, chest circumference, sleeve length, and total length were compared with the body size distribution and percentiles of men and women aged 18 to 29. The distribution of each size specification mostly appeared in a section larger than the men's body size. The size specifications of unisex sweatshirts were set close to or larger than men's sizes and hardly represented women's sizes. To increase consumer satisfaction with unisex clothing, establishing a size standard that could accurately reflect the body size distribution of men and women was found to be imperative. Such a size standard could also help each brand specify or diversify its target and differentiate itself with other brands.

• Journal of Korea Multimedia Society
• /
• v.18 no.10
• /
• pp.1189-1196
• /
• 2015

In this paper, we proposed automatic extraction of brain tumor using morphological operation and statistical tumors size in MR images. Neurosurgery have used gamma-knife therapy by MR images. However, the gamma-knife plan systems needs the brain tumor regions, because gamma-ray should intensively radiate to the brain tumor except for normal cells. Therefore, gamma-knife plan systems spend too much time on designating the tumor regions. In order to reduce the time of designation of tumors, we progress the automatical extraction of tumors using proposed method. The proposed method consist of two steps. First, the information of skull at MRI slices remove using statistical tumors size. Second, the ROI is extracted by tumor feature and average of tumors size. The detection of tumor is progressed using proposed and threshold method. Moreover, in order to compare the effeminacy of proposed method, we compared snap-shot and results of proposed method.

• Journal of Fashion Business
• /
• v.6 no.1
• /
• pp.128-136
• /
• 2002

This study was initiated to study suitability of the apparel sizing systems that utilized in women's ready-to-wear market. To achieve this, the researchers surveyed 383 women from the ages of 18 through 59. The result of this study are followed. 1) The targeted age of the apparel brand does not always correspond with the purchaser's age. The subjects tend to prefer the brands targeting younger women than their age. The women who prefer the brand targeting younger women than their age were less satisfied with the jacket size available in Korean apparel market. They also took into consideration their body size. 2) The subjects who prefer the brands aimed for younger women were dissatisfied with fit at waist and hips. 3) The result of this study also shows that the more sizes are needed for short and tall women. The subjects pointed out that hips of the pants gave worst fit. 4) KS standard size designation system which listed body measurements bust-hips stature was not well known to the consumers.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1530-1541
• /
• 2007

The purpose of this study is to establish a standard sizing system for Taekwondo uniforms. The sample utilized in the study consisted of 5,679 male and female subjects, obtained from Size Korea Project. Twenty three measurements were identified and selected as critical in the design and construction of Taekwondo uniforms. The results were as follows: First, it was determined that all brands used "height" as a key dimension of size designation. Two of brands added "chest girth" or "numeric numbers" to designate size in addition to "height". For example: 1) height/chest girth, 2) height/numeric number. The size pitches of all current Taekwondo uniforms in the market were 10cm of height for all brands. Second, the study showed male measurements were larger and longer than females, establishing that independent sizing specifications by sexes are needed. Third, in case of Taekwondo shirts, height and chest girth were selected as control dimensions. In case of pants, height and waist girth were selected as control dimensions. For selecting optimal sizing pitch, 2 different pitches of chest girth and waist girth(4cm pitch by KS and 8cm pitch by researchers) were compared, while height pitch was fixed at 10cm. Fourth, based on the analysis of the measurements(coverages and coverage efficiency rates), it was determined that 8cm pitches of chest and waist girth were efficient in both upper and lower Taekwondo uniforms. Fifth, subjects distribution counts and percentages were shown after analyzing coverage efficiency rates. Separate results are noted for the upper and lower Taekwondo uniforms. As previously mentioned, height pitches were 10cm and chest and waist pitches were 8cm. Finally, as a result of this research, key and referable measurements relevant to making Taekwondo uniforms were identified for male and female uniform. In case of Taekwondo shirts, 18 sizes were established for men, 16 sizes for women. Twenty five sizes for men and 20 sizes for women were presented in size tables for pants.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.8
• /
• pp.753-762
• /
• 2013

This paper forecast that, if the EMC test market for broadcasting and communication materials and equipment reaches a saturated state, such will give rise to adverse effects such as capture phenomenon, rent seeking phenomenon, and stiff test price competition; this in turn will eventually wield a negative impact on our society. Thus, to determine the saturation level of EMC test markets, the size of test markets and test capabilities of the designated laboratories were surveyed. As a result, the operation rate of equipment in the EMC test markets was revealed to be 78 %, suggesting market saturation. Moreover, the wireless, wire, and SAR equipment operation rates reached 65 %, 3 %, and 10 %, respectively, suggesting market saturation. Thus, maintaining the strictness of testing requires limiting the designation of new test laboratories; in light of practices and implementation of laws, however, the relevant administrative agency has difficulty rejecting applications for the designation of laboratories.

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.284-292
• /
• 2024

Purpose: Compared to general fires of the same size, underground parking lot fires are more likely to cause human and property damage and are not easy for firefighters to extinguish fire and save lives. This study attempted to find out how to secure the evacuation safety of parking lot users based on changes in the evacuation simulation behavior mode applied to evaluate the evacuation safety of the object. Method: Simulation for each CASE was performed using the Pathfinder program. Result: it was found that the higher the reference value, the higher the evacuation time, and Behavior showed an increase in time in SFPE mode rather than Steering mode. Priority was able to confirm an increase in time in priority designation rather than non-priority designation. Conclusion: The Required Safe Egress Time (RSET) for evaluating the evacuation safety of underground parking lots and the building evacuation design to ensure evacuation safety should be evaluated and reflected separately from Simulation's Behaviour Mode and Priority.

• Journal of the Korean Society of Costume
• /
• v.55 no.2 s.92
• /
• pp.116-128
• /
• 2005

The aim of this study is to understand problems with both fit and sizing system of gloves by analyzing the glove production industries with an emphasis on the sizing system, production measurement system, and general marking situation. Also, to suggest the basic raw materials for improving sizing system for gloves, actual glove control sizes were compared to the anthropometric data of the previous study Fifteen domestic production companies were participated in this study-Domestic glove production companies established their own sizing system by copying inter-national brand's glove sizing system or by their experience. The Korean Standard of gloves and the 1997 Korean Standard Anthropometrics Measurement for producing glove patterns are not considered because of its discordance with the reality of the required measurements. Domestic glove production companies used different size designation and labeling system. Size measurement unit also showed difference among the glove production companies. Some companies used 'cm', some used 'mm', some used 'inch' for the measurement unit. In general, companies produced 5 to 4 sizes in one design of glove and the production was the highest in M and L size. In 9 out of 15 companies preferred control size as hand length and hand circumference. For reference size, most of the companies preferred finger circumference, finger length, palm length, hand breadth, crotch height, and hand thickness. Actual glove sizes were compared to the anthropometric data of the previous study. The results indicated that most of the measurements of actual glove sizes were significantly larger than the anthropometric data.