• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.711-715
• /
• 1990

Continuous column chromatographic separation of lysozyme from egg white was investigated. A weak acid type cation exchange resin, Duolite C-464, was used because of high lysozyme recovery and ease of column operation in this experiment. The resin was equilibrated at $pH\;7.9{\pm}0.1$ in Na+form. Continuous lysozyme separation was processed by repeating cycles(one cycle : resin equilibration, flow egg white, rinse, lysozyme elution) in automated preparative Liquid Chromatography(LC) system(column size ; i.d. 50 mm, resin bed volumn ; 1020 ml). At comparison of UV levels in rinse end point and elution end point of every cycle, the UV levels of rinse end point are maintained below 30% for 19 cycles and that of elution end point are also maintained below 30% for 17 cycles, stably, but was increased above 50% after 18 cycle. That indicated the eluting ability of lysozyme was reduced conspicuously after 18 cycle in continuous cycling process. The recovery of lysozyme was maintained above 90% from one to 17 cycle, but was decreased to 72% and 65% in 18 cycle and 19 cycle, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.239-246
• /
• 2013

The purpose of this study was to find out the potential of the Mosidae(Adenophora remtriflora) leaf, one of the natural ingredients, for the cosmetics by measuring their antioxidant functions and skin improving effects. The result of the phytonutrient of the Mosidae leaf test shows, that the heat extract of Mosidae leaf DPPH has 9% higher ability than Ethanol extract.(p<0.05), but significant a difference was not found between the hydroxyl Radical of Mosidae leaf heat extract (65.22%) and Ethanol extract(63.50%). Mosidae leaf heat extract(40.82mg/mL) has much lower polyphenol compound than Ethanol extract(47.90mg/mL)(p<0.05). A clinical test of Mosidae leaf powder pack was performed for a group of 16 middle aged women(age between 35-60) from October 20 to November 17, 2011. Control group was used on the right cheek, and test group was used on left cheek for comparison. The procedure was twice a week for 4 weeks to identify and grade level of moisture, roughness, pore size and spot. After 4 weeks of testing, there were significant improvements in moisture enhancement and spot(p<0.05), subtle change in roughness and the size of the pores. Therefore, we confirmed skin improvement effect of Mosidae leaf as new cosmetic material.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.215-221
• /
• 2009

Statement of problem: Recently the populations of patients receiving implant surgery are greatly increase for maintaining oral health. Purpose: This study was conducted for implanted patients to assess the chewing ability patient satisfaction level and changes in quality of life before and after the implant surgery. Material and methods: The current study subjected 109 adult patients, older than 20 years of age, who received implant surgery from December, 2006 to October, 2007 at the 6 dental clinics located at Daegu and Ulsan metropolitan cities. Twice of surveys were conducted for the patients before and after receiving the dental implant surgery. Results: As the motivation of receiving implant surgery, 45.9% of the patients selected the surgery for the chance o "f chewing function recovery", and " failure of treatment and complications" was found to be the most worrisome at the time of surgery by recording 38.5%.The satisfaction level before the implant surgery scored 30.37, while the score was increased to 45.01 after the surgery by showing a significant difference before and after receiving the surgery(P<.001). Regard on the surgery, 91.8% of the patients responded as "Satisfy", and 89% of the study subjects responded that they have willingness to recommend the surgery to their families and friends. The chewing ability score measured by using the surveys on edible foods, the score before the surgery was 15.24, while the score was increased to 19.11 after the surgery by showing a significant difference before and after receiving the surgery(P<.001). The quality of life score was also found to be increased to 11.17 after the surgery from 9.99 before the surgery by showing a significant difference(P<.001). Conclusion: In a future, the studies on the numbers of implanted loss teeth and the location of tooth loss are necessary, more long-term follow study are needed, and it is thought to be necessary to enlarge the sample size of subjects in conducting the studies.

• Restorative Dentistry and Endodontics
• /
• v.32 no.6
• /
• pp.522-529
• /
• 2007

The purpose of this study was to compare the apical leakage of the root canal filled with the System B and the EndoTwinn(the combined application of heat and ultrasonic vibration). Sixty extracted premolars with straight root were cleaned and shaped to size 35. Group SB was obturated using System B and Group ET was filled with EndoTwinn. A size 35 of 0.06 tapered gutta-percha and Adseal were used and the plugger which could be introduced to 4 mm short of working length was selected in the obturation procedure. As the positive control, Group PC was not filled. In Group SB, ET and PC, all external surfaces of each tooth were coated with nail varnish leaving only 1 mm area around the apical foramen. In the negative control of Group NSB and Group NET, all of external tooth surface including apical foramen was coated with the nail varnish. The specimens were immersed in methylene blue dye solution for 2 days. Then the specimens were sectioned at each 1 mm from apex to 5 mm level. The final score of one specimen was given by summing up of the points at all levels. The dye leakage of Group ET was significantly less than that observed in Group SB (p < 0.05). And the frequency of gutta-percha pulling out from root canal when the plugger was removed was more often with the System B than with EndoTwinn but there was no significant difference.

• Journal of Nutrition and Health
• /
• v.30 no.6
• /
• pp.679-689
• /
• 1997

Nutrition label (NL) on the package of processed food provides consumers with a reliable and consistent source of information . It has been considered as a useful aid for food selection and a potent educational tool for nutrition in daily life. Since current nutrition labeling regulation in Korea does not define a format for presenting nutrition information a wide variety of NL format exists in the markers created by individual manufacturers. Development of standard NL format and its registration remain to be the work for the professionals and government officials. However the acceptance and evaluation of NL by the consumers is a very important and necessary process in the development of NL formats. In this study four different formats A, B, C, D were formulated based on currently circulating labels and new U.S.NL. Subjects used for evaluation of these formats were middle -aged highly educated housewives, who and the potential users of NL. Major parameters observed through the questionnare were their nutritional knowledge of RDA, ability of IC(Information Comparison) and CA (Comprehension and Application of informed nutrient contents), as well as their preference to the different formats. The results are summarized as follows. 1) Of the 178 subjects , 89.9% of the middleaged housewives were college graduates. Their nutrition knowledge of RDA were relatively satisfactory showing over 80% correlation on the basic concepts and unit while for numerical value less than 50% correct answer. 2) IC test scores were significantly different among the formats showing the highest values for format A and B which are presented as absolute value and % RDA, respectively. Format C presented as serving size(number of products) showed the lowest score. CA scores were also significantly different, though the increased load of information did not facilitate to increase the consumers comprehension. 3) RDA knowledge test scores and the scores of IA and CA were correlated in format A and D but not in format B and C suggesting % RDA presentation would be more acceptable to the less educated group. 4) For the preference in the aspects of easiness and time-saving format A was the best one then format D supporting the result of IC and CA test. The results of the present study indicate the most useful and preferred format is the simplest format presented as absolute value without RDA, . The secondly preferred format is the new NL format of the US with much information .

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.4
• /
• pp.233-238
• /
• 2012

Purpose: To evaluate the effect of silvernanopartilce treated implants on the bone formation and osseointegration. Methods: Silvernanoparticle was produced using an anodic oxidation method. The size of silvernanoparticle ranged from 3.5 nm to 5.9 nm. To check the effect of the capability of osseointegration of silvernanoparticle coated Implant, 32 implants (16 piece of Implant treated with nanoparticle, and 16 piece of Implant was not treated for control) were placed at both the tibia of 8 New Zealand white rabbits. After 4 weeks, 4 rabbits were sacrificed and the removal torque was measured for comparison of the osseointagration ability. Further, 4 rabbits were sacrificed and sliced samples were made. H&E stain was done for microscopic finding. Results: The removal torque of the experimental group was $102.37{\pm}30.54$ N/cm, and the control group was $73.30{\pm}19.97$ N/cm. It was statistically significant (P<0.001). Microscopic finding also shows extinguish results in silvernanoparticle treated implants. Bone formation rate of the experimental group was 43.94% and the control group was 7.58%. It was observed to be statistically significant (P=0.017). Bone to implant contact rate of the experimental group was 58.09%, and the control group was 19.43%. It was found with statistical significance (P<0.001). Conclusion: The silvernanopartilce treated implant shows a better capability of bone regeneration and osseointegration than the non-treated one. Technology to produce smaller particles would make silver more useful and safer.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.4
• /
• pp.63-72
• /
• 2007

In this paper, we propose a novel reconfigurable coprocessor for multimedia mobile terminals. Because most of multimedia operations require fast operations of large amount of data in the limited clock frequency, it is necessary to enhance the performance of the embedded processor that is widely used in current multimedia mobile terminals. Therefore, we proposed and have designed the coprocessor which had the ability of fast operations of multimedia data. The proposed coprocessor was not only reconfigurable, but also flexible and expandable. The proposed coprocessor has been designed by using VHDL and compared with previous reconfigurable coprocessors and a commercial embedded processor in architecture and speed. As a result of the architectural comparison, the proposed coprocessor had better structure in terms of hardware size and flexibility. Also, the simulation results of DCT application showed that the proposed coprocessor was 26 times faster than a commercial ARM processor and 11 times faster than the ARM processor with fast DCT core.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.99-111
• /
• 1999

The purpose of this study was to evaluate crystalline silica contents in airborne respirable dusts from various manufacturing industries and to compare analytical ability of two different methods of quantifying crystalline silica, X-ray diffraction(XRD) and Fourie transform infrared spectroscopy(FTIR). Various manufacturing industries with a history of having pneumoconiosis cases and also known to generate dusts containing crystalline silica were investigated. These industries include: ceramics, brick, concrete, and abrasive material etc. The personal respirable dust samples were collected using l0mm, Dorr-Oliver nylon cyclone equipped with 37mm, $5{\mu}m$ pore size. polyvinylchloride (PVC) filters as collection media. All samples were weighed before and after sampling and were pretreated according to the NIOSH sampling and analytical methods 7500, and 7602 for dust collection and quartz analysis. A total of 48 samples were collected from these industries. Initial analyses of these samples showed log-normal distributions for dust and quartz concentrations. Some results from ceramics and stone exceeded current Korean Occupational Exposure Limits. The average concentrations of personal respirable dust by cyclone were 0.43, 0.24, 0.26, 0.42, 0.53 and $0.29mg/m^3$ in ceramics, stone, concrete, glass, briquets, and others, respectively. A comparison of performance of two analytical methods for quantifying crystalline silica was performed using data from ceramics. The results showed that no significant difference was found between two methods for ceramics. The mean crystalline silica contents determined by XRD were 3.41 % of samples from briquets and 7.18 % from ceramics and were 2.58 % from concrete and 10.33 % from ceramics by FTIR. For crystalline silica analysis, two analytical techniques were highly correlated with $r^2=0.81$ from ceramics. Both cristobalite and tridymite were not detected by XRD and FTIR.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.249-257
• /
• 2007

The periodic square wave (PSW) model was successfully applied to the optimal design of a batch-storage network. The network structure can cover any type of batch production, distribution and inventory system, including recycle streams. Here we extend the coverage of the PSW model to multitasking semi-continuous processes as well as pure continuous and batch processes. In previous solutions obtained using the PSW model, the feedstock composition and product yield were treated as known constants. This constraint is relaxed in the present work, which treats the feedstock composition and product yield as free variables to be optimized. This modification makes it possible to deal with the pooling problem commonly encountered in oil refinery processes. Despite the greater complexity that arises when the feedstock composition and product yield are free variables, the PSW model still gives analytic lot sizing equations. The ability of the proposed method to determine the optimal plant design is demonstrated through the example of a high density polyethylene (HDPE) plant. Based on the analytical optimality results, we propose a practical process optimality measure that can be used for any kind of process. This measure facilitates direct comparison of the performance of multiple processes, and hence is a useful tool for diagnosing the status of process systems. The result that the cost of a process is proportional to the square root of average flow rate is similar to the well-known six-tenths factor rule in plant design.

• Korean Journal of Agricultural Science
• /
• v.12 no.2
• /
• pp.242-252
• /
• 1985

In order to get information on the ecology of rice false smut, germination ability and pathogenicity of sclerotia and chlamydospores of the pathogen, environmental conditions affecting the disease outbreak and varietal resistance have been investigated. 1. The degree of outbreak of rice false smut was higher in the upland rice in comparison with the paddy field rice in respect to the number of affected grains per ear, the size and weight of smut balls formed on affected grains as well as the ratio of sclerotial formation produced on smut balls. 2. Germination percentage and days required for germination of overwintered sclerotia placed on the soil surface in July were 81% and 19 days, respectively, while those of overwintered sclerotia treated in May were 60-70% and 41 days. Sclerotia placed on the soil surface or under 1 cm depth of the soil surface and incubated at $25-30^{\circ}C$ were germinated well, whereas those placed under 3 cm or 5 cm depth of the soil surface were not germinated at all. Germinability and stroma productivity of sclerotia were reduced when the sclerotia were cutted into small pieces. 3. The average number of stroma formed on a sclerotium was six and that of perithecia formed in a stroma was about 50 to 140. 4. Percentage of germination of chlamydospores on the yellow balls was very high and was decreased as the color of the balls being darken with maturation. 5. Panicle of rice plants were successfully infected by injection inoculation with suspention of ascospores and chlamydospores of the pathogen to the sheaths at the booting stages, while seeding infection by spraying with suspensions of chlamydospores was unsuccessful. 6. More number of infected grains was distributed on basal parts of an affected ear than that of infected ones distributed upper parts of the ear, when the affected ear was divided into five parts from its basal portion to the apical of the ear. 7. The occurrence of the disease was more severe in the late maturing varieties of rice in comparison with the early maturing varieties. 8. When the level of nitrogen applied was increased, the incidence of disease increased, and the infection percentage of the disease was increased as the transplanting date was delayed. 9. The weight of panicles and 1000 kernels and the ratio of ripenness were reduced, and the contamination degree of grains with chlamydospores were increased as the number of smut balls per panicle were increased.