• Physical Therapy Korea
• /
• v.9 no.3
• /
• pp.113-124
• /
• 2002

The objectives of this study was to investiage the effects of sitting posture on carpal tunnel syndrome. Carpal tunnel syndrome (CTS) continues to be one of the most widely publicized maladies of the cumulative trauma disorder. Many studies have reported a positive association between CTS and highly repetitive work, high force, and poor posture. High force and repetitive work have especially been associated with CTS, but the evidence for work being a primary cause of CTS is strongest when these factors are combined. In addition to carpal tunnel syndrome, hand, wrist, and other disorders are attributed to these work-related movements. Such disorders are referred to as repetitive stress injuries, cumulative trauma disorder, overuse syndromes, and chronic upper limb pain syndrome. Incorrect posture also may play a role in the development of CTS in people who work at a computer and other types of keyboards. The tendency to roll the shoulders forward, round the lower back, and thrust the chin forward can shorten the neck and shoulder muscles, compressing nerves in the neck. This, in turn, can affect the wrist, fingers, and hand. The treatment and prevention of carpal tunnel syndrome continue to be approached with a segmental view of the human body. For example, the most common ergonomic solution for carpal tunnel syndrome associated with keyboard use is to keep the wrists in a neutral position by using a wrist rest in front of the keyboard and good sitting posture.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.63-68
• /
• 2002

This study performed to evaluated musculoskeletal disorders(MSDs) during sitting work. The musculskeletal system is affected by various work factors such as strength, weight, posture, repetition, duration and exertion. Ergonomic study on sitting work is necessary to evaluate these factors affecting human body. But the strength and work load data by the work factors are insufficient in Korea. Therefore, this study evaluated the work load using the elcctromyogram(EMG) and measured the arm strength by arm posture and push pull work during sitting work. to evaluated muscle load, the vertical height and horizontal angle of arm were adjusted around acromion. And EMG data were recorded on pc during the test.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.399-401
• /
• 2009

The purpose of this study is looking for deviation of change in HRV caused of posture. Total 20 adults were measured for 40 minutes(10 minutes rest section and 30 minutes analysis section) when volunteers were sitting and lying down. Other factors which can change in HRV were controlled during measurement. The analysis section were divided by total 6 stages(each by 5 minutes), and compared and analyzed between sitting and lying down groups. It was also compared and analyzed stages in each group. In the result, there was difference at stage 5($20{\sim}25$ minutes interval), but no difference in the total data. The results of each stage in the group, lying down had difference. Therefore, sitting is more stable measurement for HRV study when subjects was waking over 15 minutes.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.4
• /
• pp.48-57
• /
• 2023

With the advance of autonomous vehicle technology various sitting posture is possible like relax position (inclined seating posture). Parametric study was done with MADYMO, a mutibody dynamics solver, to investigate the effect of sitting posture in different frontal crash modes, full frontal, 40% offset, and angled rigid barrier crash as well as various impact speeds. Hybrid III 50th male and 5th female dummies were used to figure out the difference induced by occupant weight and dimension. Restraint system parameters complying to current safety protocols like NCAP are studied if they still work effectively in relax position which is feasible with autonomous vehicles.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.7
• /
• pp.940-945
• /
• 2018

In this study, we make a study on a system to determine a person's sitting posture by measuring the distribution of pressure in the floor of a chair or in a cushion using pressure sensors. If the wrong sitting posture is detected, a warning message is given through the vibration motor in real time to correct the imbalance of the wrong habits and posture, and prevent Bulging disc or Herniated disc.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.6
• /
• pp.955-968
• /
• 2010

Three-dimensional body data has been used in many industry fields including the apparel industry. This research used data from a study of the changes in lower body girth measurements from a 3D scan study of 25 female subjects aged 18 to 24 in four postures; a standing posture, a $120^{\circ}$ knee bend posture, a one pace stepping posture, and a sitting posture with a $90^{\circ}$ knee bend. We used the information on the difference between standing and seated measurements to adjust ease values for pants patterns an evaluation of the appearance, and the comfort of the pants. Waist girth in the sitting posture increased 8% compared to a standing posture and the hip girth measurement increased 7%. A basic pants pattern (pants A) with 2.4cm ease at the waist and 2.6cm ease at the hip was developed and a pants pattern (pants B) was developed using the rates of lower body girth change with a 5.7cm ease (8% change) at the waist and 7cm ease (7% change) at the hip. The appearance assessment items of pants A in a standing posture were higher than pants B. On the other hand, most appearance assessment items of pants B in a sitting posture were higher than pants A, especially the ease of pants back waistline and the appearance of the whole back. Comfort assessment items of pants B in both standing and sitting postures were higher than the comfort assessment items for pants A, especially the location of pants waistline, the ease of pants at the waistline, and the ease at the abdomen. In order to find the best level of ease for better appearance and comfort in both standing and sitting postures, 20 pants were constructed with ease values at the waist and hip in increments of 1.1cm in the range between the ease values of pants A and pants B. A fit test was conducted to compare the average appearance and comfort ratings that identified the pants with the best ease values at the waist and hip. The highest total mean was achieved in the pants with a waist ease of 4.6cm and hip ease of 4.8cm.

• Journal of Korean Physical Therapy Science
• /
• v.20 no.1
• /
• pp.43-49
• /
• 2013

Background and purpose : The shoulder joints permit the greatest mobility of any joint area carries out the important function of stabilization for hand use. Research has now shown that grip strength has proven to be a reliable indicator for quality of life at an older age. The purpose of this study was to investigate the effects of testing posture and shoulder position on grip strength for repetitive gripping task. Methods : Forty(20male, 20female) college adult volunteers with no known shoulder dysfunction participated subject in two testing posture(sitting and standing) and three positions with shoulder flexion: (1) shoulder $0^{\circ}$ flexion (2) shoulder $90^{\circ}$ flexion (3) shoulder $180^{\circ}$ flexion. The paired t-test was used to determine any significant difference in grip strength between the testing posture and shoulder position. Results : The higher grip strength gained in the sitting with the shoulder $180^{\circ}$ flexion and the higher grip strength gained in the standing with the shoulder $180^{\circ}$ flexion. The second experiment showed that the grip strength was significant for sitting, standing position of shoulder $0^{\circ}$ flexion( p<0.05). Grip strength goes up as increase height and weight. Conclusion : These findings demonstrate that the theory does not fit with, because of the influence of gravity, a measure from the shoulder joint is the most high, $0^{\circ}$. And sitting posture and stance in the grip of a difference when compared SIT $0^{\circ}$ and standing position $0^{\circ}$ significant difference in indicated but, $90^{\circ}$ and $180^{\circ}$ in the sitting position and stance in the grip of the difference was not significant difference. To demonstrate the universality of this study's results, future studies should have a larger and more subject as well as a more even distribution of male and female subject. Therefore future research is needed to refine the definition and identify optimal methods of measuring this grip strength.

• The Journal of Korean Physical Therapy
• /
• v.25 no.6
• /
• pp.386-392
• /
• 2013

Purpose: This study aimed to verify the impact of the time that the sitting posture is maintained on changes in muscle performance and head alignment. Methods: The subjects of this study were healthy adults aged between 20 and 30 years. Ninety-three subjects participated in this study (male: 57, female: 36). The subjects were divided into a one-hour group, a two-hour group, and a three-hour group. All the subjects adjusted the height of their chair to a comfortable position and then seat for one, two, or over three hours. Both prior to and after the experiment, the muscle performance (muscle strength, endurance, and flexibility) of the subjects was measured. Results: In the 2-hours and 3-hour group, muscle strength, flexibility and endurance reduced significantly before and after the study, and the head alignment significantly changed. Conclusion: Thease findings showed that sitting continuously for longer than two hours decreases muscle strength, endurance, and flexibility. A flexed posture affects the muscle performance of the lumbar region and may result in problematic postures, such as a forward head position.

• Physical Therapy Korea
• /
• v.18 no.3
• /
• pp.26-37
• /
• 2011

Although there have been various studies related to the body's movement from a sitting to a standing position (sit-to-stand task), there is limited information on the kinematic changes on the frontal and transverse planes. The purpose of this study was to ascertain how pelvic tilt affects kinematic changes in the frontal and transverse planes in the hip and knee joints during a sit-to-stand task. For this study, 33 healthy participants (13 female) were recruited. Each participant rose from a sitting to a standing posture at his or her preferred speed for each of three different pelvic tilt trials (anterior, posterior, and neutral), and the measured angles were analyzed using a 3-D motion analysis system. A one-way repeated measure analysis of variance was performed with Bonferroni's post hoc test. In addition, an independent t-test was carried out to determine the sex differences in hip and knee joint kinematic changes during the sit-to-stand tasks. The results were as follows: 1) The hip and knee joint angle in the frontal and transverse planes showed a significant difference between the different pelvic tilt postures during sitting in the pre-buttock lift-off phase (pre-LO) (p<.05). Compared to the posterior pelvic tilt posture, the anterior pelvic tilt posture involved significantly greater hip joint adduction and internal rotation, knee joint adduction, and reduced internal rotation of the knee joint. 2) Sex differences were found with significant differences for males in the initial and maximal angles in the frontal plane of the hip and knee joint (p<.05). Females had a significantly smaller initial abduction angle of the hip joint and a significantly greater maximal angle of the hip adduction joint. These results suggest that selecting a sit-to-stand exercise for pelvic tilt posture should be considered to control abnormal movement in the lower extremities.

• Journal of the Ergonomics Society of Korea
• /
• v.11 no.2
• /
• pp.3-13
• /
• 1992

Resultant compressions on the L5/S1 joint of six subjects were studied as they lif- ted light weights in sitting and standing work postures. The subjects activities were photographed and analysed later by a static biomechamical computer model. Statistically significant differences were found between the result of the two postures analyses. Sitting posture showed significantly high compressions on the joint when doing several material handling tasks having the same work loads from the hip joint. Therefore, it is recommended that working with light weights in standing is less hazardous than doint the same work sitting postures, although both the maximum compression forces are under the Action Limit suggested by NIOSH.