• International Journal of Highway Engineering
• /
• v.17 no.2
• /
• pp.71-78
• /
• 2015

PURPOSES: This study set out to investigate the current state of microsurfacing in Texas and compared the results with the current state of the practice nationwide. METHODS: For this study, case studies were extracted from the existing literature and compared with the data obtained both from site visits by the research team and data obtained from a survey by Texas Department of Transportation (TxDOT) personnel. The successes and failures of microsurfacing are detailed and explanations of different issues are outlined. Forensic studies from Texas are included in the descriptions of those microsurfacings that failed when configured as part of the cape seals. RESULTS : Microsurfacing has been shown to be an effective pavement preservation technique when applied to an appropriate road, at an appropriate timing, and as a remedy for certain issues. The failures experienced in Texas can mostly be attributed to cape seals and an inability to recognize structurally faulty pavement. CONCLUSIONS : When applied to an appropriate road, at an appropriate timing, and as a remedy for certain issues, microsurfacing has been shown to perform well in numerous case studies. The majority of microsurfacing failures are the result of poor project selection, usually involving the treatment being applied to structurally unsound pavement.

• KIEAE Journal
• /
• v.7 no.4
• /
• pp.3-8
• /
• 2007

This study is aimed to apply basic data to planning earth building through analyzing characteristics of earth building. For doing it, we investigated a research paper in advanced countries(New zealand, Australia, etc.) that has been used for earth building standards for a long time, and then we corrected inadequate standards that would apply our earth building environment. As a result, we can devide earth characteristics into three parts that are materials, plan, and maintenance and repair. First, as material selection is very important factor, a general plan is possible to change in accordance with what material is selected. These methods that made mud brick, pressed earth block, rammed earth, cob have been well used during the current 30 years in earth building. Second, the plan is composed of site select and architecture plan. In architecture plan, we should consider from foundation to eaves protection, and in site selection, consider sides of the environment and the social. Third, we should always check a periodical inspection through watchful observation because earth buildings need more time and efforts in maintaining and repairing than others.

• KIEAE Journal
• /
• v.16 no.6
• /
• pp.21-27
• /
• 2016

Purpose: The research is focused on the 25th King Cheoljong's mother's parents' traditional House in Ganghwa-do, for finding out how the surrounding natural environment was considered with Pungsu, a traditional ecological architectural science in case of site selection and architectural planning by the relative of royal family of Joseon period. Method: The study is processed as follows. Human Environment of the region where the house is located, is analyzed in chapter 2. Feature of mountain expressed as dragon and four important hills of the house are analyzed in chapter 3, Highly regarded factors for site selection by the scholar of the Realist School of Confucianism such as wind environment, the front and back of the Hyunmubong and building orientation are analyzed in chapter 4. Finally Pungsu applied in architectural space is analyzed in chapter 5. Result: The house considered Pungsu to some extent, but it shows the appearance contrary to the Pungsu in a certain part in order to show authority and proud as the house of the relatives of the King. It can be seen that the degree of application of Pungsu may be different depending on the will of the building owner.

• The Journal of Engineering Geology
• /
• v.24 no.4
• /
• pp.455-461
• /
• 2014

The Honam-Jeju, Korea-Japan, and Korea-China subsea tunnel construction projects have drawn significant attention since the early 2000s. These subsea tunnels are much deeper than most existing natural shallow sea tunnels linking coastal areas. Thus, the need for developing new technologies for the site selection and construction of deep subsea tunnels has recently emerged, with the launch of a research project titled "Development of Key Subsea Tunnelling Technology" in 2013. A component of this research, an analysis of deep subsea geological structure, is currently underway. A ground investigation, such as a borehole or geophysical investigation, is generally carried out for tunnel design. However, when investigating a potential site for a deep subsea tunnel, borehole drilling requires equipment at the scale of offshore oil drilling. The huge cost of such an undertaking has raised the urgent need for methods to indirectly assess the local geological structure as much as possible to limit the need for repeated borehole investigations. This study introduces an indirect approach for assessing the geological structure of the seafloor through a submarine bathymetry analysis. The ultimate goal here is to develop an automated approach to the analysis of submarine geological structures, which may prove useful in the selection of future deep subsea tunnel sites.

• Proceedings of the Ginseng society Conference
• /
• 1998.06a
• /
• pp.103-108
• /
• 1998

The Canadian production of American ginseng (Panax quinquefolius L.) occurs mainly in Ontario, British Columbia and the Atlantic provinces. Although ginseng is a profitable crop, its successful production is dependent on careful consideration of cultural management f include site selection, site preparation, seed selection and handling, shading actors which and mulching, pest and nutritional management, and handling of harvested crops. Diseases of particular concern in Atlantic Canada are root rots caused by Phytopkthora cactorum, Cylindrocarpon destructans and Fusarium sp. Recently two systemic fungicides (metalaxyl and fosetylal) were registered; however, growers in Atlantic Canada have experienced metalaxyl resistance resulting from the reliance on this single compound for the control of Phytophthora sap. Current research being conducted on alternative control of these diseases will be discussed. In weed control research, 2, 4-D, MCPA, clopyralid have continued to show promise for weed contro1 at low rates. In trials to evaluate non-selective herbicides as post-senescence or pre-emergence in ginseng, glyphosate (Round-up) provided control of perennials as well as willowherb and lambsquarters. In phytoxicity trials, ginseng significantly tolerated grass herbicides, including clethodim, rimsulfuron, trakloxydim, nicosulfuron and fenoxyprop. For broadleaf herbicides, significant tolerance was shown for bromoxynil, thifensulfuron methyl, flumetulam/clopyralid, thifensulfuro/tribenuron. Disease and weed management of ginseng in Atlantic Canada will be discussed.

• Journal of Crop Science and Biotechnology
• /
• v.10 no.2
• /
• pp.73-78
• /
• 2007

The green revolution has significantly helped in increasing the food production. So far, various breeding methods have been exploited, besides them recombination DNA technology provides another approach for increasing the food production. By means of this technology the losses in food production incurred by various biotic and abiotic stresses can be effectively controlled. In most of the transgenic studies scientists have used antibiotic resistant genes as markers for easy selection of transformants but there are risks involved in use of GM foods. To make such foods safer and environment friendly we have discussed a novel strategy i.e. Cre-lox which involves site specific recombination. By means of Cre-lox the marker genes can be specifically removed once the selection of transformants is over. In addition, this strategy can be used to module the hybrid chromosomes, avoid gene silencing and incorporate single copy of a transgene for its higher expression.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.411-415
• /
• 2006

The Circumstances surrounding world ports have changed rapidly and port competition to attract more a client to each other. then, In the future, only a few ports will be survive. Therefore, industrail that concern with ports is very important position. if it revitalize, port must have international competitiveness. The purpose of this paper is as follow. The first is to investigate ship-instrument industrial with theoretical background and distribution cycle. And then, to determine the location' ship-instrument distribution center' in the Busan Port. The second is to analyze to proposal location for distribution center.

• Journal of the Korea Safety Management & Science
• /
• v.24 no.1
• /
• pp.11-19
• /
• 2022

In order to find out the management and sanitation status of protective gear provided at the construction site, a case study and survey were conducted by visiting the site. As a result of the case study, inspection and management, disinfection, and storage of protective equipment were insufficient in both workplaces with less than 50 employees and workplaces with more than 100 employees. As a result of the survey, workers(66.2%), said they did not know how to identify hard hats(67.6.%), how to identify bad hard hats(60.8%), and how to identify bad safety belts (73.0%), even though workers(66.2%) were educated on protective gear, and those in charge of protective gear Non-specified(56.8%), regular inspection of the provided protective equipment was not performed(82.4%), and disinfection was not performed(90.5%). Therefore, as a management plan to maintain the performance of personal protective equipment, educational aspects, regular training on protective equipment, training on how to identify defective protective equipment, management of recording papers, technical aspects, strengthening of standards for placement of dedicated safety managers in small workplaces, participation of workers' representatives when selecting protective equipment, and selection of protective equipment for workers Providing opportunities, administrative aspects of protective equipment regulation and management, introduction of sanitary and cleanliness system, and selection of personnel in charge of protective equipment management were suggested.

• Safety and Health at Work
• /
• v.12 no.4
• /
• pp.424-431
• /
• 2021

Background: This study aims to introduce the formulation of the regulation for the selection of respirators for accident preparedness chemicals (APCs) according to chemical workplace situations and to determine on-site applicability. Methods: Workplaces were grouped into seven work categories, and APCs were classified into six groups to select adequate respirators. A survey was conducted to enhance the understanding of work situations and adequate respirators. The total number of subjects surveyed in 2018 was 201 managers and handlers, and that in 2019 was 91 handlers and 204 managers. Results: Adequate respirators were allocated to each cell using the matrix method. The study observed an overall lack of understanding of work situations, especially in the operation of open devices, which was the highest at 32.7%. Despite its implementation in 2015, 17.6% and 25.0% of the managers and APCs handlers, respectively, were unaware of the regulations for selecting respirators. Only 70.4% of the APCs handler wore respirators in compliance with regulations. Conclusion: The method for selecting respirators according to work situations using the matrix method is considered reasonable. Thus, this study suggests that the development of educational contents and reinforcing education should be essential steps to increasing awareness of regulations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.764-772
• /
• 2018

It is necessary to explore the possibility of alternative habitats and research the characteristics of basic habitats due to seeding, culturing and harvesting of blood clams (Tegillarca granosa) in tidal flats. Currently, dependence on naturally occurring spat is much higher than in other species, which may lead to a reduction in biological resources. In this study, we selected a total of 5 sites (Changgi, Hopo in Cheonsu Bay and Dangsan, Sachang, Wangsan in Garolim Bay) and examined habitat suitability factors for suitable site selection. Also, we considered the relationship of habitat suitability factors (Environment: water content, organic content; survival: mud content, mean size; growth: chlorophyll a). As a result, Wangsan had the highest score of the main habitat of blood clams (Habitat suitability score, Wangsan: 87; Dangsan: 86; Sachang: 81; Hopo: 78; and Changgi: 73). The sediment in Garolim Bay was fine-grained and the seasonal variation was lower than Cheonsu Bay. Therefore, it is considered that Garolim Bay is more suitable as a potential area and easy to utilize the space. In the future, search and selection of potential suitable sites could be considered to solve problems caused by the reduction of biological resources and the production for blood clams.