• Journal of the Korean Solar Energy Society
• /
• v.35 no.1
• /
• pp.1-8
• /
• 2015

In the present study, the effects of the heat spreader thickness and the heat sink size on the thermal performance of a cooling device for a concentrating photovoltaic (CPV) module were numerically investigated. Numerical simulation was conducted by using the simulation tool ICEPAK, commercial software based on the finite volume method. Numerical results were validated by comparing the existing experimental data. The thermal performance of a cooling device, which consisted of a heat spreader and a natural convective heat sink, was evaluated with varying the heat spreader thickness and the heat sink size. The geometric configuration of the natural convective heat sink, such as the fin height, the fin spacing, and the fin thickness, was optimized by using the existing correlation. The numerical results showed that the thermal performance of the cooling device increased as the heat spreader thickness or the heat sink size increased. Also, it was found that the spreading thermal resistance plays an important role in the thermal performance of the cooling device which has the localized heat source.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9B
• /
• pp.792-802
• /
• 2006

In this paper, we propose an energy-efficient proactive data dissemination protocol with relatively low delay to cope well with highly mobile sink environments in sensor networks. In order for a dissemination tree to continuously pursue a dynamic sink, we exploit two novel algorithms: forward sink advertisement and distributed fast recovery. In our protocol, the tree is shared with the other slave sinks so that we call it Dynamic Shared Tree (DST) protocol. DST can conserve considerable amount of energy despite maintaining robust connection from all sources to sinks, since tree maintenance of DST is accomplished by just distributed local exchanges. In addition, since the DST is a kindof sink-oriented tree, each source on the DST disseminates data with lower delay along the tree and it also facilitates in-network processing. Through simulations, it is shown that the presented DST is considerably energy-efficient, robust protocol with low delay compared to Directed Diffusion, TTDD, and SEAD, in highly mobile sink environment.

• Journal of computational fluids engineering
• /
• v.18 no.2
• /
• pp.9-16
• /
• 2013

The heat transfer enhancement of heat sink with mist flow is studied numerically by solving the conservation equations for mass, momentum and energy in the continuous and dispersed phases. A Lagrangian method is used for tracing dispersed water droplets in the heat sink and an Eulerian species transport model for air and steam mixture. The continuous and dispersed phases are interacted with the drag and evaporation source terms. The computed results show that addition of evaporating mist droplets enhances the cooling performance of heat sink significantly.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.2
• /
• pp.65-73
• /
• 2004

By the progress of communication and hardware technology, It is possible to organize wireless sensor nodes using the tiny sensor in recently. It is a critical aspect to minimize energy consumption for long-term lively sensor because wireless sensor nodes are associated with the available resources. The wireless sensor network is restricted in communication, exhaustion of power, and computation but it is very similar an Ad-Hoc network. Each sensor node products a few data and application layer of each sensor has slow transmitting feature. Unlike Ad-hoc, which is usually source or sink, base station of the each senor nodes works as sink and the other nodes except sink node works as source. Generally, wireless sensor network keep staying fixed state and observing circumstances continuously after setting up. It doesnt fit for the wireless sensor networks under functioning of existing ad-hoc networks because original Ad-Hoc network routing protocol couldnt operate for wireless sensor network features. This thesis propose the effective routing protocol way in the filed of the expanded routing protocol based on tree with considering on the characteristic of wireless sensor networks pattern.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.294-298
• /
• 2008

The major threats that human being is facing nowadays are the Climate change, depletion of the fossil fuels at a rapid rate and energy costs. A significant portion of world energy consumption is consumed by domestic heating and cooling. And heat pumps, due to their higher utilization efficiencies as compared to conventional heating and cooling systems, offer an attractive solution to this problem. Among the types of heat pumps, the Geothermal heat pump or Ground-source heat pump is a highly efficient, renewable energy technology for space heating and cooling. The Ground-source heat pump uses the Earth as a heat sink in the summer and a heat source in the winter. And the Earth, having a relatively constant temperature, warmer than the air in winter and cooler than the air in summer, offers an excellent heat source in winter and heat sink in summer.. This paper will discuss an overview of the types of heat pumps, its operation, benefits of using geothermal heat pumps, soil characteristics, and overview of some experimental works. Finally it will briefly discuss the opportunity of using these energy efficient systems (EES) in the HVAC market of South Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.260-267
• /
• 1995

In temperate zone planting rice at different date subjects the Crop to different climatic condition. The present study aimed at comparison of the change in source-sink relationship of the Japonica(J) and that of IndicaxJaponica(I$\times$J) type rice cultivars caused by shift of heading date. Two J- and two I$\times$J-type cultivars were made to head on August 16, August 26, and September 5. Sink capacity was changed by shift of heading date in different mode between the types of cultivars. In both types major determinant of sink capacity was number of effective tillers, and the number of spikelets per panicle was the minor. In J-type earlier planting/heading was beneficial to increased panicle numbers and this was due mainly to a larger diurnal difference in temperature. I$\times$J-type cultivars favored a higher daily mean temperature to increase the sink capacity. The ability of source at heading, in terms of leaf area per panicle, chlorophyll content per spiklet, photosynthetic ability of leaves per unit area at 25$\^{\circ}C$, carbohydrate and N contents of leaves, was not so different among different heading dates in both types. However, the source activity was governed principally by temperature during grain filling. The J-type cultivars headed on Sept. 5 and I$\times$J-type cultivars headed later than August 16 could not have had sufficient source activity in grain filling due to lower temperature.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.1
• /
• pp.43-48
• /
• 1986

The experiment was conducted to know the varietal difference in changing aspect of daily filling sink during of rice using three cultivars; ‘Suweon 295’ (japonica), ‘Suwoen 264’ and ‘IR 1317-70-1’ (semi-dwarf indica) cultivated in the field and green house of the Crop Experiment Station in 1983. There was not significant varietal difference in flowering habit and duration of flowering period each panicle. Semi-dwarf indica cultivars showed shorter days to physiological maturity of rice kernel than the japonica one. The former also displayed earlier decrease in water content of rice grain during ripening than the latter. Japonica variety revealed larger difference in ripening advancement between vigorous florets and inferior one than semi-dwarf indica varieties. The semi-dwarf indica rice cultivars expressed significantly shrewder parabola of daily filling of sink per panicle during ripening than the japonica one. The time showing maximum capacity of daily filling of sink per panicle during ripening was 10-12 days after anthesis. The filling capacity of daily sink filling per panicle for 'IR 1317-70-1', 'Suweon 264' and 'Suweon 265' at this time were about 240 mg, 165 mg and 145 mg, respectively. Pattern of sink filling per panicle during ripening was slightly changed by the cultural environment. ‘Suweon 295’ showed slightly sharper parabola and 2-3 days earlier time showing maximum capcity of daily sink demand per panicle during ripening in the field than those in the green house.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.3
• /
• pp.201-205
• /
• 2009

This paper addresses issues to efficiently collect and aggregate data of sources within a local and adjacent region in geographic routing for wireless sensor networks. We first introduce the concept of a local sink which collects and aggregates data form source nodes in the region and delivers the aggregated data to a global sink. We also design a model to determine an optimal location of the local sink and propose a mechanism to collect data through the local sink. Simulation results show that the proposed mechanism with the local sink is more efficient in terms of the energy and the data delivery ratio than the existing mechanism without the local sink in a geographic routing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.377-385
• /
• 2010

In this paper, we propose a SInk-initiated geographic Multicast (SIM) protocol to reduce frequent location updates from mobile sinks to a source and to achieve fast multicast tree construction and data delivery. The proposed protocol allows sinks to construct their own data delivery paths to a source node and a multicast tree to be atomically constructed by merging the paths. Then, the source forwards data to the destinations down the multicast tree. This paper also propose a round-based virtual infrastructure with a radial shape for increasing the merging probability of data delivery paths and reducing reconstruction ratio of the multicast tree due to mobility of sinks. Simulation results show that the proposed protocol is superior to previous SOurce-initiated geographic Multicast (SOM) protocols in term of average data delivery delay and average energy consumption.

• Journal of Power System Engineering
• /
• v.20 no.1
• /
• pp.11-17
• /
• 2016

In this study, the simulation for performance comparison between basic single stage organic rankine cycle, multi stage reheater cycle and multi stage reheater & recuperator cycle was carried out. The multi stage reheater cycle and multi stage reheater & recuperator cycle was designed to improve the efficiency for organic rankine cycle using heat source from industrial waste heat and heat sink from deep ocean water. R245fa was selected as a refrigerant for the cycle and system efficiencies were simulated by the variation of the heat sink temperature and the cycle classification. Performance characteristics were simulated by using the Aspen HYSYS. It was confirmed that the system efficiency was decreased by the increase of heat sink temperature. These results can be considered to be applied as geo-ocean thermal energy conversion in where plenty of geothermal or ocean thermal resource exist.