• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.40-40
• /
• 2010

CdSe nanocrystals (NCs) have been decorated on singlewalled carbon nanotubes (SWCNTs) by combining a method of chemically modified substrate along with gate-bias control. CdSe/ZnS core/shell quantum dots were negatively charged by adding mercaptoacetic acid (MAA). The silicon oxide substrate was decorated by octadecyltrichlorosilane (OTS) and converted to hydrophobic surface. The negatively charged CdSe NCs were adsorbed on the SWCNT surface by applying the negative gate bias. The selective adsorption of CdSe quantum dots on SWCNTs was confirmed by confocal laser scanning microscope. The measured photocurrent clearly demonstrates that CdSe NCs decorated SWCNT can be used for photodetector and solar cell that are operable over a wide range of wavelengths.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.162-163
• /
• 2005

Singlewalled carbon nanotubes are largely synthesized on Fe-Mo/MgO catalysts by catalytic decomposition of CH4 in H2. Raman data revel that the as-prepared SWNTs have a diameter of about 0.7-1.2nm. It is found that the diameter of the as-prepared SWNTs can be controlled mainly by adjusting the molar ratio of Fe-MO versus the MgO support. The experimental results was documented with scanning electron microscopy(SEM), X-ray Diffractometer(XRD) and Raman spectroscopy.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 하계학술발표회
• /
• pp.196-197
• /
• 2004

• Carbon letters
• /
• 제1권2호
• /
• pp.53-59
• /
• 2000

The synthetic methods for high yield of multiwalled carbon nanotube (MWNT) and singlewalled carbon nanotube (SWNT) with high purity by arc discharge have been investigated. MWNTs were synthesized under different pressures of helium and the gas mixture of argon and hydrogen. Relatively high pressure of 300-400 torr was required for high yield MWNTs synthesis at low bias voltage of about 20 V and 55 A, whereas low pressure of about 100 torr was required for SWNTs. The introduction of hydrogen gases during the synthesis of MWNTs improved the yield and purity of the samples. The SWNTs were synthesized by the assistance of a small amount of mixture of transition metals, which played as a catalyst during the formation process. The purity and yield of SWNTs were higher at a lower pressure and enhanced by mixing more components of the transition metals.

• 한국재료학회지
• /
• 제12권6호
• /
• pp.499-507
• /
• 2002

The carbon nanotube emitters for field emission displays were fabricated by using screen printing techniques. The pastes for screen printing are composed of organic binders, carbon nanotubes (multiwalled or singlewalled), and some additive materials. The pastes were printed on Cr-coated/Ag-printed soda-lime glass substrates. From the I-V characteristics, the turn-on field of SWNT was lower than that of MWNT. The decrease in the mesh size of screen masks (i.e. increase in the opening size of the screen mesh) resulted in decreasing the turn-on field and increasing the electron emission current. When the carbon nanotubes were mixed with silver pastes, silver powders appeared to contribute to the vertically aligning of carbon nanotubes on a glass.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2002년도 제23회 학술발표회 초록집
• /
• pp.169-169
• /
• 2002

• 한국진공학회지
• /
• 제19권5호
• /
• pp.377-384
• /
• 2010

본 연구에서는 수직 가열로(vertical furnace)를 이용하여 $1150^{\circ}C$의 온도에서 섬유형태의 고순도 단일벽 탄소나노튜브(singlewalled carbon nanotubes)를 합성하였다. 탄소나노튜브의 구조에 영향을 미치는 실험 변수인 페로센(ferrocene)의 농도, 혼합용액의 주입 속도, 싸이오펜(thiophene)의 농도, 수소($H_2$)의 주입 양을 조절하여 고순도의 단일벽 탄소나노튜브 섬유의 최적화 된 대량 합성 조건을 확립하였다. 또한 각 요인들이 탄소나노튜브의 생성에 미치는 영향에 대해 논의하였다. 분석 결과, 최적화 된 조건에서 1.16~1.64 nm의 직경을 가진 고순도의 단일벽 탄소나노튜브가 다발(bundle) 구조로 정렬되어 있음을 확인할 수 있었다.