• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.9
• /
• pp.43-49
• /
• 1998

The deep hole drilling has an increasing demands because of its wide range applications and its good productivity. The BTA drills are capable of machining for having a large length to diameter ratio in single pass to higher degree of accuracy and surface finish. It's really necessary that the investigation for the deep hole drilling by the BTA drill because its required quality should be satisfied with single pass. This thesis deal with the experimental results obtained during single tube BTA system machining on SM55C steel for different machining conditions. The results of the investigation on the optimum cutting condition selecting and tool life reveals as follows. (1) The optimum cutting condition was cutting speed, V = 42 m/min and feed speed. F = 90 mm/min and the tool life was about 10 meters. (2) Surface roughness was $12\mum$ and the roundness was less using $16mum$single edge BTA drill in testing cutting condition.

• Journal of Welding and Joining
• /
• v.11 no.3
• /
• pp.34-47
• /
• 1993

Finite element models were developed for thermal and residual stress analysis for the specific welding problems. They were used to evaluate the effectiveness of the various welding heat input models, such as ramp heat input function and lumped pass models. Through the parametric studies, thermal-mechanical modeling sensitivity to the ramp function and lumping techniques was determined by comparing the predicted results with experimental data. The kinetics for residual stress formation during welding can be developed by iteration of various proposed mechanisms in the parametric study. A ramp heat input function was developed to gradually apply the heat flux with variable amplitude to the model. This model was used to avoid numerical convergence problems due to an instantaneous increase in temperature near the fusion zone. Additionally, it enables the model to include the effect of a moving arc in a two-dimensional plane. The ramp function takes into account the variation in the out of plane energy flow in a 2-D model as the arc approaches, travels across, and departs from each plane under investigation. A lumped pass model was developed to reduce the computation cost in the analysis of multipass welds. Several weld passes were assumed as one lumped pass in this model. Recommendations were provided about ramp lumping techniques and the optimum number of weld passes that can be combined into a single thermal input.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.185-186
• /
• 2015

This paper introduces general single PLL(Phase Locked Loop) algorithm and compares with proposed PLL method. The suggested PLL uses low pass filter to reduce high harmonics in real grid and uses feed forward method to compensate phase delay of the low pass filter.

• Structural Engineering and Mechanics
• /
• v.7 no.2
• /
• pp.203-216
• /
• 1999

A previously proposed finite element formulation method is refined and modified to generate a new type of elements. The method is based on selecting a set of general solution modes for element formulation. The constant strain modes and higher order modes are selected and the formulation method is designed to ensure that the element will pass the basic single element test, which in turn ensures the passage of the basic patch test. If the element is to pass the higher order patch test also, the element stiffness matrix is in general asymmetric. The element stiffness matrix depends only on a nodal displacement matrix and a nodal force matrix. A symmetric stiffness matrix can be obtained by either modifying the nodal displacement matrix or the nodal force matrix. It is shown that both modifications lead to the same new element, which is demonstrated through numerical examples to be more robust than an assumed stress hybrid element in plane stress application. The method of formulation can also be used to arrive at the conforming displacement and hybrid stress formulations. The convergence of the latter two is explained from the point of view of the proposed method.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.349-354
• /
• 2005

In this paper, a small supersonic wind tunnel is designed and built to study the flow characteristics of a supersonic impulse turbine cascade. The flow is visualized by means of a single pass Schlieren system. The supersonic cascade with 2-dimensional supersonic nozzle was tested for various blade leading edge shapes and gaps between the nozzle and cascade. Highly complicated flow patterns including shocks, nozzle-cascade interaction and shock boundary layer interactions are observed.

• Speech Sciences
• /
• v.11 no.1
• /
• pp.43-52
• /
• 2004

This paper concerns an effective dual-channel noise reduction method to increase the performance of speech recognition in a car environment. While various single channel methods have already been developed and dual-channel methods have been studied somewhat, their effectiveness in real environments, such as in cars, has not yet been formally proven in terms of achieving acceptable performance level. Our aim is to remedy the low performance of the single and dual-channel noise reduction methods. This paper proposes an effective dual-channel noise reduction method based on a high-pass filter and front-end processing of the eigendecomposition method. We experimented with a real multi-channel car database and compared the results with respect to the microphones arrangements. From the analysis and results, we show that the enhanced eigendecomposition method combined with high-pass filter indeed significantly improve the speech recognition performance under a dual-channel environment.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.3
• /
• pp.19-25
• /
• 1994

The single-pass perfusion technique was employed in order to investigate the effect of water flux from the rat jejunum in the normal experimental conditions. Our results suggested that water flux below ${\pm}0.75%/cm$ of jejunal length was considered normal. Water flux was $-0.131\;{\pm}\;0.311%/cm$ of jejunal length in a citrate buffer and should be corrected in order to determine the permeabilities of the compounds. Perfusion rate up to 0.5 ml/min had no effects on the permeability of ampicillin. Neither the effective permeabilities nor the wall permeabilities of aminopenicillins were influenced by water flux during experiments in rats.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.6
• /
• pp.849-861
• /
• 1995

In this paper, a new trace driven simulation algorithm is proposed to evaluate the bus traffic and the miss ration of the various sector cache memories, which have various sub-block sizes and block sizes and associativities and number of sets, with a single pass through an address trace. Trace-driven simulaton is usually used as a method for performance evaluation of sector cache memories, but it spends a lot of simulation time for simulating the diverse cache configurations with a long address trace. The proposed algorithm shortens the simulation time by evaluating the performance of the various sector cache configurations. which have various sub-block sizes and block sizes and associativities and number of sets , with a single pass through an address trace. Our simulation results show that the run times of the proposed simulation algorithm can be considerably reduced than those of existing simulation algorithms, when the proposed algorithm is miplemented in C language and the address traces obtained from the various sample programs are used as a input of trace-driven simulation.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10b
• /
• pp.233-237
• /
• 2006

This study proposes an innovative measure for evaluating the performance of text clustering. In using K-means algorithm and Kohonen Networks for text clustering, the number clusters is fixed initially by configuring it as their parameter, while in using single pass algorithm for text clustering, the number of clusters is not predictable. Using labeled documents, the result of text clustering using K-means algorithm or Kohonen Network is able to be evaluated by setting the number of clusters as the number of the given target categories, mapping each cluster to a target category, and using the evaluation measures of text. But in using single pass algorithm, if the number of clusters is different from the number of target categories, such measures are useless for evaluating the result of text clustering. This study proposes an evaluation measure of text clustering based on intra-cluster similarity and inter-cluster similarity, what is called CI (Clustering Index) in this article.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.529-532
• /
• 2002

We experimentally investigate the evolution of nanosecond Stokes pulses in a single-pass Raman laser pumped by a Q-switched Nd: YAG laser at 1064 nm. As a Raman medium, a GeO$_2$-doped graded-index multimode fiber of 220m long is used. We demonstrate that efficient generation of several Stokes components with 1.5-2.7 nanosecond pulsewidth is obtained by varying the input pump energy.