• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.17-27
• /
• 2014

The number of manufacturing companies that demand the ability to assess sustainability in their manufacturing system is rapidly increasing. However, there are still difficulties in assessing their sustainability in manufacturing for decision-making since it is not easy to determine a single index of sustainability in an operational way. To address these difficulties, this paper proposes an operational guidance and system to assess sustainability of production plan as a single index. The IDEF0 model was defined to explain processes and their input, output, control, and mechanism for sustainability assessment. A prototype system was developed based on the concepts presented in the IDEF0 model, and applied to a case study. To conclude, the prototype system proposed in this paper can help manufacturing companies assess sustainability of their production plans and make a decision using a single value resulted from that assessment.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.4
• /
• pp.46-52
• /
• 2003

For position control of electro-hydraulic servo system, single rod cylinders and double rod cylinders are used. Single rod cylinders have simple structure for manufacturing but different volume ratio of two sides induce to non-linearity in process of then mathematical modeling. So only with conventional PID control method it is difficult to control single rod cylinders precisely. For mole precise position control of single rod cylinders, a controller which is inserted a velocity feedback PID controller and MRAC controller are proposed. With experiment control performances of three control methods are compared. In case of experiment, for external varying load to the system, a hydraulic cylinder and a pressure control valve are used. In conclusion a MRAC is considered a suitable control method for external varying load.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.724-730
• /
• 2010

A load cell is a converter that generates voltage signals when a certain force is effected in a given direction. An essential measurement device for electronic scales that indicate weight by numbers. These load cells are being applied in various areas such as daily life, distribution, laboratory and industrial. Recently the study to manufacture load cells in a more simple method while increasing performance is being persisted. In this study based on the comparison of load cells manufactured through single surface processing using strain gauges. Those manufactured through dual surface processing using strain gauges. Ultimately persist a more simple method of load cell manufacturing while increasing its performance. The elements that were compared were linearity, hysteresis, creep and eccentricity which are short tenn performance factors. The conclusion was that single surface processing showed almost identical data as that of dual surface processing, and the load cell error rate(0.005%) also excess regulation. The manufacturing time was shortened while mass-production was possible. Which indicates a development in the weighing industry.

• IE interfaces
• /
• v.24 no.4
• /
• pp.330-340
• /
• 2011

This research aims at conducting a comparative study on the relative efficiency of technologically innovative activities between manufacturing and service industries using data envelopment analysis (DEA). First, as an individual approach, efficiency of technologically innovative activities between manufacturing and service industries is separately evaluated. The results show that efficiency of both industries is similarly low, but patterns of technologically innovative activities differ from each other. Manufacturing industries usually do innovation focusing on various outputs with a single input, whereas service industries tend to do innovation emphasizing on a single output with mixed inputs. Second, as a holistic approach to both industries, efficiency is collectively assessed. The analysis demonstrates that efficiency of service industries is higher than that of manufacturing industries, and there are similar patterns of technologically innovative activities between both manufacturing and service industries. This study provides industrial managers with policy implications based on similarities and differences between manufacturing and service industries.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.6
• /
• pp.452-457
• /
• 2016

Single screw compressors are widely used in the fields of air/gas compression, refrigeration, and chemical fluid transportation systems. A single-screw compressor is composed of a screw rotor and two gate rotors located at both sides. This simple construction enables low rotational speed of the rotor, efficient compression with low noise, low vibration, and long bearing life. Despite these merits, the design method of single-screw compressors is not well known. To accelerate the industrial application of single-screw compressors, a design method using coordinate transformation is presented in this paper, and a tool trajectory is established for machining. Finally, the screw rotor, which is machined using the proposed method, is presented.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2007.08a
• /
• pp.373-373
• /
• 2007

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.8
• /
• pp.751-758
• /
• 2009

Failure strengths of composite single-lap adhesive joints were investigated with various parameters such as manufacturing method, overlap length and adherend thickness. A total of 335 single-lap joint specimens were tested under tension. Specimens were fabricated with 4 different manufacturing processes; cocuring without and with adhesive, secondary bonding and co-bonding. Each manufacturing process has 5 different overlap lengths and 4 different thicknesses, respectively. As expected, failure strength is higher in thicker adherend joints and lower in larger overlap length specimens. Interesting result is that the secondary bonded joints show the higher strength than the cobonded and cocured joints with adhesive, and give close or even higher strength compared with non-adhesive cocured case.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.48
• /
• pp.269-277
• /
• 1998

In this study, a traditional concept of sampling inspection plan for the quality assurance system is extended to a consideration of economic aspects in total production system by representing and analyzing the effects between proceding/succeeding production process including inspection. This approach recognizes that the decision to be made at one manufacturing process (or assembly process) determine not only the cost and the average outgoing quality level of that process but also the input parameters of the cost and the incoming quality to the succeeding process. By analyzing the effects of the average incoming and outgoing quality, manufacturing/assembly quality level and sampling inspection plan on the production system, mathematical models and solution technique to minimize the total production cost for a single product manufacturing system with specified average outgoing quality limit (AOQL) are suggested.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.29-33
• /
• 2013

Here we report a partially aminated micropattern via direct functionalization and examine eleven different solution-phase probe DNAs hybridizing with the same target DNA on both hydrogen and oxygen terminated diamond. The hybridization intensities determined by epifluorescence microscopy were compared and are influenced strongly by the negatively charged surface and mismatched position of its sequence with immobilized probe DNA.

• Journal of Adhesion and Interface
• /
• v.7 no.4
• /
• pp.24-27
• /
• 2006

International standards claim the best possible reliability in industrial manufacturing processes. This is also essential for the application with manual applicators. The application of adhesives with manual applicators is one of the most frequently used application techniques. The range of application reaches from the building of prototypes in the automobile industry over the use in single or small-batch manufacturing up to applications in crafts enterprises. Conventional manual applicators for adhesives and sealants don't fulfill the demands in international standards for the best possible reliability. Only the worker is able to control the quality and the quantity of the bond. A velocity-controlled manual applicator solves these restrictions. Special sensors and micro controllers calculate the flow-rate, the velocity and the location of the manual applicator. This leads to stable and repeatable application processes which are claimed in international standards. The location of the bond can be compared with the nominal value, so that it is possible to check the quality of the bond during application. Furthermore there is the potential to document the data of the manufacturing process.