• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2005.11a
• /
• pp.101-104
• /
• 2005

본 논문에서는 국내에서 채택한 ATSC-DTV (Advanced Television System Committee-Digital Television)의 단일주파 수망 (SFN; Single Frequency Network) 구성을 위한 TxID (Transmitter Identification)용 ZCD (Zero Correlation Duration)확산코드 기반의 부분상관 정합필터를 새롭게 제안하였다. 본 논문에서 제안한 정합필터의 구현 알고리즘은 TxID에 있어서 기존의 정합필터 구조를 적용할 경우에 발생되는 소비전력 문제나 하드웨어 구현의 어려움을 획기적으로 해결할 수 있다는 잇점을 갖는다. 따라서 본 논문에서는 이러한 다양한 잇점을 갖는 새롭게 제안한 ZCD용 부분상관 정합필터를 FPGA (Field Programmable Gate Array)를 이용한 디지털 하드웨어로 구현하고 그 성능을 분석함으로써 유용성을 확인하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2005.11a
• /
• pp.105-108
• /
• 2005

본 논문에서는 지상파 디지털 방송시스템의 단일 주파수망 (SFN; Single Frequency Network) 구성을 위해 DTV (Digital Television) TxID (Transmitter Identification)용 저간섭 ZCD (Zero Correlation Duration) 확산코드를 제시하였다. ZCD 확산코드는 코드발생기의 구현이 용이함과 동시에 ZCD특성을 가짐으로 인해서, TxID에서 발생되는 인접코드 간섭 (ICI; Inter Code Interference) 및 다중경로 간섭 (MPI; Multi-Path Interference) 문제를 확산코딩기법을 이용하여 근원적으로 해결해주는 역할을 하고 있으며, 주기를 가변적으로 조절할 수 있어 TxID를 위한 워터마킹 (Watermarking)시에 발생하는 Truncated error를 제거할 수 있다. 본 논문에서는 AWGN (Additive White Gaussian Noise) 잡음 및 ICI, MPI와 같은 다양한 간섭환경을 모의실험에 반영하여 도출된 DER (Detection Error Rate)특성을 분석함으로써, TxID용 저간섭 ZCD 확산코드의 유용성을 입증하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.43.1-43.1
• /
• 2013

We present here the preliminary results of the fast variability of AGN radio light curves. The shortest time scale of minute in AGN light curves is needed to probe the AGN activity for a few reasons; First, to check if there is any kind of shortest time scale activity. Secondly, to find out what high frequency end of AGN spectra look like. For the last, to see the time delay at several wavelength bands and the change of the spectral index with time. The observation was conducted with three KVN(Korea VLBI Network) antennas with single dish cross scan mode. In order not to lose the target at any given time, whenever one station needs to observe the calibrator, the other station is on the target. Though the detailed data reduction is still going on, there might exist varying feature in the radio light curve. The more fine calibration will be done in near future and another good data set is ready for the reduction.

• ETRI Journal
• /
• v.39 no.5
• /
• pp.756-763
• /
• 2017

A switchable single-wideband (SWB)-to-dual-wideband (DWB) bandpass filter (BPF), which is realized by using lumped switches, is presented in this paper. By alternating the operation modes-ON and OFF-in which the ON mode is achieved by placing the capacitors at the switching spots and the OFF mode is achieved by replacing the capacitors with inductors, DWB-to-SWB BPF can be achieved on the same device. In addition, by changing the capacitor values, the center frequency (CF) of the lower passband of DWB BPF can be easily tuned from 1.69 GHz to 2.22 GHz, while the higher passband stays almost unchanged. As an example, an SWB-to-DWB BPF is designed, fabricated, and measured. This BPF exhibits good performance including wideband, high isolation, compact size, and ability to switch.

• Smart Structures and Systems
• /
• v.18 no.2
• /
• pp.335-354
• /
• 2016

This contribution presents an extended one-dimensional theory for piezoelectric beam-type structures with non-ideal electrodes. For these types of electrodes the equipotential area condition is not satisfied. The main motivation of our research is originated from passive vibration control: when an elastic structure is covered by several piezoelectric patches that are linked via resistances and inductances, vibrational energy is efficiently dissipated if the electric network is properly designed. Assuming infinitely small piezoelectric patches that are connected by an infinite number of electrical, in particular resistive and inductive elements, one obtains the Telegrapher's equation for the voltage across the piezoelectric transducer. Embedding this outcome into the framework of Bernoulli-Euler, the final equations are coupled to the wave equations for the longitudinal motion of a bar and to the partial differential equations for the lateral motion of the beam. We present results for the wave propagation of a longitudinal bar for several types of electrode properties. The frequency spectra are computed (phase angle, wave number, wave speed), which point out the effect of resistive and inductive electrodes on wave characteristics. Our results show that electrical damping due to the resistivity of the electrodes is different from internal (=strain velocity dependent) or external (=velocity dependent) mechanical damping. Finally, results are presented, when the structure is excited by a harmonic single force, yielding that resistive-inductive electrodes are suitable candidates for passive vibration control that might be of great interest for practical applications in the future.

• Earthquakes and Structures
• /
• v.19 no.1
• /
• pp.29-44
• /
• 2020

The effectiveness and the sensitivity of a Wireless impedance/Admittance Monitoring System (WiAMS) for the prompt damage diagnosis of two single-storey single-span Reinforced Concrete (RC) frames under cyclic loading is experimentally investigated. The geometrical and the reinforcement characteristics of the RC structural members of the frames represent typical old RC frame structure without consideration of seismic design criteria. The columns of the frames are vulnerable to shear failure under lateral load due to their low height-to-depth ratio and insufficient transverse reinforcement. The proposed Structural Health Monitoring (SHM) system comprises of specially manufactured autonomous portable devices that acquire the in-situ voltage frequency responses of a network of twenty piezoelectric transducers mounted to the RC frames. Measurements of external and internal small-sized piezoelectric patches are utilized for damage localization and assessment at various and increased damage levels as the magnitude of the imposed lateral cycle deformations increases. A bare RC frame and a strengthened one using a pair of steel crossed tension-ties (X-bracing) have been tested in order to check the sensitivity of the developed WiAMS in different structural conditions since crack propagation, damage locations and failure mode of the examined frames vary. Indeed, the imposed loading caused brittle shear failure to the column of the bare frame and the formation of plastic hinges at the beam ends of the X-braced frame. Test results highlighted the ability of the proposed SHM to identify incipient damages due to concrete cracking and steel yielding since promising early indication of the forthcoming critical failures before any visible sign has been obtained.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.8
• /
• pp.3923-3927
• /
• 2016

Infection with the hepatitis C virus is a major public health concern which can lead to carcinoma and liver failure. It has been shown that single nucleotide polymorphisms can affect the level of gene activity of tumor necrosis factor (TNF) which has an important role, especially in viral infections which can lead to apaptosis of infected hepatocellular cells. We investigated the impact of three possible genotypes for rs1800629 or A/G single nucleotide polymorphism located downstream of $TNF{\alpha}$ gene promoter in groups of control (n=76) and chronic hepatitis C patients (n=89) focusing on the response to treatment among sensitive and resistant groups. Genomic DNA was extracted from $500{\mu}l$ prepheral whole blood and PCR and RFLP were used to amplify the region of interest and genotyping. With statistical analyzes a p-value <0.05 was considered meaningful. There was no significant difference in distribution of possible three genotypes among healthy individuals and patients (P=0.906, OR=1.194, CI=0.063-22.790). However, the frequency of G allele was higher in patients whereas A allele was more common among healthy individuals (p<0.0001). Further studies with more samples seem to be necessary.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.201-206
• /
• 2015

A new electronically stopband tunable filter is proposed with three-input single-output using Operational Transconductance Amplifier (OTA) in this paper. The proposed filter provides band pass, low pass and high pass multifunctional responses. Centre frequency ($f_c$) and quality factor (Q) of the realized filters could independently tuned without disturbing each other. Various network sensitivity and non-ideal characteristic analysis are done to check the sensitivity and parasitic effect of different circuit parameters. The CMOS realization of filter is done with 1.8V-0.18um process parameters and HSPICE simulation results are presented to assert the presented theory.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.794-801
• /
• 2017

In this paper, we proposed airborne target recognition using multi-channel combining method in DTV-based passive radar. By combining multi-channel signals, we obtained the HRRP with sufficient range resolution. HRRP was obtained by AR method or zero-padding. From the obtained HRRP, we extracted scattering centers by CLEAN algorithm using the gradient descent. We extracted feature vectors and performed target recognition after training neural network using the extracted feature vectors. To verify performance of proposed methods, we assumed frequency bands of three broadcasting transmitters operated in Korea(Mt. Gwan-ak, Mt. Yong-moon, Kyeon-wol-ak) and used full scale 3D CAD model of four targets. Also we compared the target recognition performance of the proposed method with that of using only single-channel of three broadcasting transmitters. As a result, proposed methods showed better performance than using only single-channel at three broadcasting transmitters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7A
• /
• pp.987-995
• /
• 1999

The handoff is a distinctive characteristic of the mobile networks. In the CDMA systems, if base stations support multiple Frequency Assignment (FA), they provide both soft handoff and hard handoff. Under the CDMA environments, the soft handoff guarantees the favorable service quality and the continuity of call connection without interruption, and increases the service capacity of the base stations. This paper proposes call connection control schemes with handoff queue for supporting efficient handoff processing. The proposed schemes are divided into two categories: single handoff queue scheme and multiple handoff queue scheme. We analyze the performance of the proposed call connection control schemes using numerical analysis. From the analysis results, we can say that it is more desirable to avoid hard handoff as long as handoff queues are used. When a single handoff queue used, adaptive scheme that properly mixes avoidable and avoidable hard handoff method under the given traffic condition is more desirable. In case that multiple handoff queues are used, the suitable trade-off needs to be developed between handoff blocking probability and hard handoff probability to guarantee a given blocking probability threshold.