계배 대뇌의 발생에 미치는 malathion의 영향을 형태,세포화학으로 비교분석하기 위하여, 수정란 부란 2일, 4일 및 6일째에 0.1mg의 malathion을 단독으로 처리하거나,NAM 5.0mg을 복합처리하여 부란 9일째 조사하였던 바, 다음과 같은 결과를 얻었다. 1.malathion은 대뇌피질내 신경세포들의 분화를 억제하여, 처리군의 핵의 불규칙상,핵막이중층의 분리, 리보솜의 분포감소, 혹은 소포체 팽창에 의한 액포형성과 같은 미세구조상의 특징이 나타났다. 2.신경세포내에서 AchE 활성은 핵막과 소포체에서 주로 나타나고, malathion에 의하여 이 효소의 활성은 크게 억제되었으며, 이러한 효소활성 억제현상은 정량분석 결과와 거의 일치하였다. 3.대뇌의 LDH 활성은 malathion에 의하여 오히려 증가되었다. 4.malathion은 계배 NAD를 크게 감소 시켰고, NAM복합처리에 의하여 NAD함량과 형태적 변화가 회복되었고, 대뇌의 Ach 및 LDH 활성 변화를 다소 완화시키는 것으로 나타났다. 이상의 결과들을 종합해보면 유기적 화합물의 하나인 malathion은 분화중인 계배 대뇌의 신경세포들의 미세구조를 변화시키고, 대뇌의 LDH활성은 증가시켰으나 AChE 활성을 크게 억제하였으며, 계배의 NAD 함량을 감소시켰다. 또한 NAD 함량의 감소와 형태적인 변화사이에는 다소간의 연관성이 나타났고, malathion의 저해작용은 처리량과 처리시기에 의존한는 것으로 나타났다.
The purpose of this study was to investigate the effect of acid etching on the surface appearance and fracture toughness of five glass ionomer cements. Five kinds of commercially available glass ionomer cements including chemical curing filling type, chemical curing lining type, chemical curing metal reinforced type, light curing tilling type and light curing lining type were used for this study. The specimens for SEM study were fabricated by treating each glass ionomer cement with either visible light curing or self curing after being inserted into a rubber mold (diameter 4mm, depth 1mm). Some of the specimens were etched with 37% phosphoric acid for 0, 15, 30, 60, go seconds, at 5 minutes, 1 hour and 1 day after mixing of powder and liquid. Unetched ones comprised the control group and the others were the experimental groups. The surface texture was examined by using scanning electron microscope at 20 kV. (S-2300, Hitachi Co., Japan). The specimens for fracture toughness were fabricated by curing of each glass ionomer cement previously inserted into a metal mold for the single edge notch specimen according to the ASTME399. They were subjected to a three-point bend test after etching for 0, 30, 60, and 90 seconds at 5 minutes-, 1 hour-and 1 day-lapse after the fabrication of the specimens. The plane strain fracture toughness ($K_{IC}$) was determined by three-point bend test which was conducted with cross-head speed of 0.5 mm/min using Instron universal testing machine (Model No. 1122) following seven days storage of the etched specimens under $37^{\circ}C$, 100% humidity condition. Following conclusions were drawn. 1. In unetched control group, crack was present, but the surface was generally smooth. 2. Deterioration of the surface appearance such as serious dissolving of gel matrix and loss of glass particles occured as the etching time was increased beyond 15 s following Immediate etching of chemical curing type of glass ionomer cements. 3. Etching after 1 h, and 1 d reduced surface damage, 15 s, and 30s etch gave rough surface appearance without loss of glass particle of chemical curing type of glass ionomer cements. 4. Light curing type glass ionomer cement was etched by acid, but there was no difference in surface appearances according to various waiting periods. 5. It was found that the value of plane stram fracture toughness of glass ionomer cements was highest in the light curing filling type as $1.79\;MNm^{-1.5}$ followed by the light curing lining type, chemical curing metal reinforced type, chemical curing filling type and chemical curing lining type. 6. The value of plane stram fracture toughness of the chemical curing lining type glass ionomer cement etched after 5 minutes was lower than those of the cement etched after 1 hour or day or unetched (P < 0.05). 7. Light curing glass ionomer cement showed Irregular fractured surface and chemical curing cement showed smooth fractured surface.
본 연구는 EDTA용액의 적용 시간에 따른 도말층의 제거 효과를 비교하여 EDTA용액의 최적 적용 시간을 알고자 시행되었다. 단근치 35개를 NaOCl 용액 하에서 근관 형성 후 대조군은 NaOCl 용액 5 ml로 2분간, 실험군은 30초군, 1분군, 2분군으로 세분하여 17% EDTA 용액 5 ml로 각각 30초, 1분, 2분간 세정하였다. 세정이 끝난 치근의 도말층 제거 정도와 상아 세관의 erosion 정도를 주사전자현미경을 이용하여 관찰한 결과는 다음과 같다. 1. 대조군: 도말층이 전혀 제거되지 않았다. 2. 실험군 1) 중간$\frac{1}{3}$: 세 군 모두에서 도말층이 거의 완전히 제거되었고, EDTA적용 시간이 증가할수록 erosion발생 빈도가 증가하였다. 2) 치근단$\frac{1}{3}$: 2분군이 다른 두 군에 비해 도말층 제거 정도가 우수하였다. 따라서 erosion 발생을 최소화면서 도말층을 효과적으로 제거하기 위해서는 17% EDTA 용액을 2분간 사용하는 것이 적절한 것으로 사료된다.
Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).
For white light emitting diode (LED) applications, it has been reported that Y3Al5O12:Ce3+ (YAG:Ce) in nano-sized phosphor performs better than it does in micro-sized particles. This is because nano-sized YAG:Ce can reduce internal light scattering when coated onto a blue LED surface. Recently, there have been many reports on the synthesis of nano-sized YAG particles using bottom-up method, such as co-precipitation method, sol-gel process, hydrothermal method, solvothermal method, and glycothermal method. However, there has been no report using top-down method. Top-down method has advantages than bottom-up method, such as large scale production and easy control of doping concentration and particle size. Therefore, in this study, nano-sized YAG:Ce phosphors were synthesized by a high energy beads milling process with varying beads size, milling time and milling steps. The beads milling process was performed by Laboratory Mill MINICER with ZrO2 beads. The phase identity and morphology of nano-sized YAG:Ce were characterized by X-ray powder diffraction (XRD) and field-emission scanning electron microscopy (FESEM), respectively. By controlling beads size, milling time and milling steps, we synthesized a size-tunable and uniform nano-sized YAG:Ce phosphors which average diameters were 100, 85 and 40 nm, respectively. After milling, there was no impurity and all of the peaks were in good agreement with YAG (JCPDS No. 33-0040). Luminescence and quantum efficiency (QE) of nano-sized YAG:Ce phosphors were measured by fluorescence spectrometer and QE measuring instrument, respectively. The synthesized YAG:Ce absorbed light efficiently in the visible region of 400-500 nm, and showed single broadband emission peaked at 550 nm with 50% of QE. As a result, by considering above results, high energy beads milling process could be a facile and reproducible synthesis method for nano-sized YAG:Ce phosphors.
A new method of limb sparing by resection, extracorporeal irradiation and reimplantation has several theoretical advantages. This method preserves the mobility of a joint and avoids the problem of loosening or breakage of tumor prosthesis. This study involved using extracorporeal irradiated autogenous joint transplantation for reconstruction after en bloc resection, and observed the periods of functional union and histological changes in irradiated tissue of the knee joint. This study also aimed to clarify whether the degeneration of articular cartilage is induced in rabbits by a single 50Gy dose of irradiation at the knee joint. Twenty New Zealand rabbits about three kilograms were randomized into two groups of 10 rabbits each. In group 1, as control, we resected the knee joint followed by reimplantation without irradiation. Group 2 received extracorporeal irradiation on the resected knee joint followed by reimplantation. Following are the results of these observations. The osteotomy site showed external callus formation in the roentgenographic finding eight weeks after reimplantation. There was marked degenerative changes in the collagen fiber of the irradiated anterior cruciate ligament and meniscus during the fourth week, but new blood-vessel formation was observed in the vicinity. There was degenerative changes in the collagen fiber of articular cartilage treated extracorporeal irradiation at four and eight weeks in the scanning electron micrographic findings. These findings was in contrast to those of subchondral bone which showed decreased cellularity and empty lacuna at four and eight weeks. Autoradiography demonstrated active [$^3H$]uridine incorporation by irradiated chondrocyte at eight weeks after reimplantation. These results indicate that when destruction of the articular cartilage and soft tissue of the knee joint is not severe, extracorporeal irradiation and reimplantation can be used with several advantage in maintaining movement of the joint while avoiding problems of tumor prosthesis and rejection, and therefore extracorporeal irradiated autogenous joint transplantation can be used as a limb-sparing procedure for temporary biological spacer in the childhood bone tumor around the knee.
To improve the solubility of poorly water-soluble drug and to develop a sustained release tablets, the need for the technique, the formation of solid dispersion with polymeric materials that can potentially enhance the dissolution rate and extent of drug absorption was considered in this study. The 1:1, 1:4, and 1:5 solid dispersions were prepared by spray drying method using PVP K30, ethanol and methylene chloride. The dissolution test was carried out at in phosphate buffer solution at $37^{\circ}C$ in 100 rpm. Solid dispersed drugs were examined using differential scanning calorimetry and scanning electron microscopy, wherein it was found that felodipine is amorphous in the PVP K30 solid dispersion. Felodifine SR tablets were prepared by direct compressing the powder mixture composed of solid dispersed felodipine, lactose, Eudragit and magnesium stearate using a single punch press. In order to develop a sustained-release preparation containing solid dispersed felodipine, a comparative dissolution study was done using commercially existing product as control. The dissolution rate of intact felodipine, solid dispersed felodipine and its physical mixture, respectively, were compared by the dissolution rates for 30 minutes. The dissolution rates of felodipine for 30 minutes from 1:1, 1:4, 1:5 PVP K30 solid dispersion were 70%, 78% and 90%. However, dissolution rate offelodipine from the physical mixture was 5% of drug for 30 minutes. Our developed product Felodipine SR Tablet showed dissolution of 17%, 50% and 89% for 1, 4, and 7 hours. This designed oral delivery system is easy to manufacture, and drug releases behavior is highly reproducible and offers advantages over the existing commercial product. The dissolution rate of felodipine was significantly enhanced, following the formation of solid dispersion. The solid dispersion technique with water-soluble polymer could be used to develop a solid dispersed felodipine SR tablet.
본 연구는 신선편이 양상치를 대상으로 전해수와 유기산의 단독 또는 병용처리에 의한 위해미생물의 살균효과를 조사하였다. 산성전해수는 액상배지에서 L. monocytogenes를 60초 내에 완전히 사멸하였으나, 알칼리전해수는 약 1.7 log CFU/g 정도 감소하였다. 그러나 L. monocytogenes를 접종한 양상치에서 산성전해수는 현저하게 살균력이 감소하여 3분 침지시 약 2.5 CFU/g의 감소를 나타내었으나 알칼리전해수는 산성전해수와 거의 살균력의 차이가 없었다. 한편, L. monocytogenes에 오염된 양상치를 전해수와 유기산 단독 또는 병용처리 하였을 때 무처리구에 비하여 산성전해수와 알칼리전해수는 약 2 log CFU/g 정도의 감소를 나타냈으며, $1\%$ acetic acid, lactic acid, citric acid 및 ascorbic acid를 처리하였을 경우 각각 1.52.5 log CFU/g의 감소를 나타냈으나, 산성전해수와 알칼리전해수에 $1\%$ 유기산을 병용처리 하였을 경우 약 2.63.7 log CFU/g의 현저한 감소를 나타내었다. 특히 산성전해수와 알칼리전해수 모두 $1\%$ citric acid와 병용처리 하였을 때 가장 강한 살균력을 나타내었다. 양상치에 오염된 총균수, 효모 및 곰팡이의 경우도 L. monocytogenes에 오염된 양상치의 살균력과 비슷한 경향을 나타내었다. 또한, L. monocytogenes를 접종한 양상치를 전해수 처리한 후 온도별로 저장하면서 생육변화를 측정한 결과, 병용처리구에서 현저하게 생육이 저해되는 것으로 나타나 양상치를 세척시 알칼리전해수와 $1\%$ citric acid를 병용처리하면 총균수는 물론 L. monocytogenes에 의한 오염방지에 매우 효과적이었다. 한편, SEM 결과, 양상치에 오염된 L. monocytogenes 는 알칼리수와 $1\%$ citric acid의 병용처리구에서는 현저하게 세포막이 파괴되어 세포가 사멸하는 것으로 나타났다.
본 연구의 목적은 피지컬 컴퓨팅 플랫폼인 아두이노와 앱 인벤터를 대한민국의 자랑스런 전통 과학기술의 유산이자 세계 최초의 돌격용 철갑전선(鐵甲戰船)으로 평가되는 거북선의 모형과 융합하여, 공업계열 특성화고 학생들이 실제적인 경험을 통해 과학기술적인 지식뿐만 아니라, 그와 더불어 역사 문화유산에 대한 인식과 가치 또한 제고해 볼 수 있는 피지컬 컴퓨팅 플랫폼 기반의 모형 거북선을 개발하는데 있다. 이 연구를 통하여 얻은 결론은 다음과 같다. 첫째, 아두이노 기반의 메인 컨트롤러 설계 및 제작은 전기 전자 제어와 관련된 하드웨어 및 소프트웨어 지식을 익히고, 아두이노와 전기전자 부품간의 기본적인 상호특성과 성능을 확인하는데 도움이 된다. 둘째, 회로도 및 패턴도 설계, 기술적 프로그래밍, 모바일 앱 개발 등의 과정을 통해 회로 설계 능력, 논리적 사고력과 문제해결력을 향상시키는데 효율적이다. 셋째, 피지컬 컴퓨팅 플랫폼 기반의 모형 거북선 개발을 통해 과학기술과 인문학적 소양을 통합적으로 함양할 수 있는 기초적인 토대를 마련하였다.
현재 우리나라에서 재배되고 있는 마늘은 오랜 세월에 걸쳐 바이러스 감염에 무방비상태로 방치된채 영양번식을 계속해 왔기 때문에 대부분의 품종들이 퇴화되어 있을 것으로 생각된다. 따라서 마늘의 단위수량과 질의 향상을 기하기 위해선 바이러스 무감염 씨마늘의 육성, 보급에 의한 품종경신이 불가피할 것으로 보인다. 본 연구는 우리나라 마늘 재배지대 전역에서 가장 많이 발생하고 있는 모자이크병을 대상으로 바이러스의 분리, 검정식물상의 반응, 전염방법, 물리적성질, 순화방법, 혈청학적반응 및 형태등을 조사함과 동시, 마늘 모자이크 바이러스의 적절한 검정방법을 구명하여 앞으로 바이러스 무감염 씨마늘을 육성, 보급하는데 필요한 기초자료를 얻을 목적으로 실시했으며 다음과 같은 결과를 얻었다. 1. 1970-1972년까지 3년간 전투의 주요 마늘재배지대를 조사한 바 우리나라에서 재배되고 있는 마늘의 거의 대부분이 모자이크병에 걸려있음이 관찰되었다. 2. 마늘 모자이크 바이러스는 Chenopodium amaranticelor에 즙액접종 함으로써 단일계통을 분리할 수 있었다. 3. 26종의 검정식물을 공시하여 마늘 모자이크 바이러스를 즙액접종한 결과, 접종 11-12일 후에 Chenopodium amaranticolor, C. quince, C. album, C. koreanse 등 4종 식물의 접종엽상에 r국부병반 반응이 나타났다. 나머지 식물들에서는 병징이 나타나지 않았을 뿐 만 아니라 C. amaranticolor에 역접종했을 때도 바이러스는 회수되지 않았다. 4. 즙액접종에 의해 국부병반 반응이 나타날 상기 4종 Chenopodium속 식물중에서 C. amaranticolor 와 C. quinoa는 반응이 설민하고 정확하기 때문에 마늘 모자이크 바이러스의 검정식물로 적당하다고 생각된다. 5. 감염주에서 유내한 종구와 주아는 모두 모자이크 바이러스에 감염되어 있었고 이들 감염종구와 주아를 통하여 $100\%$ 전염되었다. 6. 마늘 모자이크 바이러스는 감염종구와 주아의 즙액에 의해서도 C. amaranticolor에 기계적 전염이 되었다. 7. C. amaranticolor 상에 계통분리된 마늘 모자이크 바이러스의 내열성은 $65^{\circ}-70^{\circ}C$, 희석한계는 $10^{-}2-10^{-3}$, 그리고 보존한계는 2 일이었다. 8. 마늘 모자이크 바이러스의 순화는 2회의 분획원심과 Sephadex gel filtration에 의해서 가능했다. 9. 전자현미경하에서 관찰한 마늘 모자이크 바이러스는 길이 1200-1225mu 폭 10-12mu의 사상이었다. 10. 혈청학적 미량침강 반응법에 의해 마늘잎에서뿐만 아니라 인편과 주아에서도 마늘 모자이크 바이러스의 검정이 가능했다. 11. 우리나라 5개 지방에서 수집한 마늘 종구 150개와 주아 30개에 대해 혈청학적방법으로 마늘 모자이크 바이러스의 감염률을 조사한 결과 $100\%$의 감염률을 보였다. 12. 마늘 모자이크 바이러스와 크기가 근사한 Potato Virus X. Potato virus Y, Potato virus S, Potato virus M 등과의 혈청학적 유연관계를 조사한 바, 마늘 모자이크 바이러스는 이들과 구별되는 다른 바이러스라고 생각된다. 13. 마늘의 모자이크 감염주에서 단일계통으로 분리하여 본 실험에 사용한 바이러스는 마늘의 바이러스 무감염주를 얻을 수가 없기 때문에 직접 마늘잎에 접종해서 모자이크톤의 병원이라는 것을 확인할 수 없었지만, 검정식물상의 반응, 혈청학적반응, 전자현미경적 관찰등의 간접적인 조사 결과로 미루어 미인록의 마늘모자이크 바이러스라고 생각된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.