• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.389-402
• /
• 1999

Single crystal of Li2Cu1-xMxO4 (M=Ni, Zn) are promising as a substrate to realize superconducting electronic devices. The distribution coefficients of Ni and Zn to the Cu site in La2CuO4 (LCO) were estimated by the zone melting technique to grow high quality single crystals of La2Cu1-xMxO4(M=Ni, Zn). The distribution coefficient value of Ni was estimated to be 4.2 and that of Zn was estimated to be 0.66, respectively. Suitable solvent compositions were determined using these values to grow single crystals by he traveling floating zone (TSFZ) method. Single crystal of LCO, La2Cu1-xMxO4(M=Ni(x=0.01, 0.02, 0.03, 0.04), Zn(x=0.01, 0.02, 0.03) of high homogeneity were grown. The behaviors of the magnetization of these as-grown crystals do not indicate superconductivity except LCO. Ni or Zn substitution can make LCO non superconductor. This fact suggest that single crystals substituted by Ni or Zn are useful as substrate crystals.

• Progress in Superconductivity
• /
• 제4권1호
• /
• pp.14-18
• /
• 2002

We had succeeded to grow bulk sing1e crystals of La／sub 2-x／Sr／sub x／$CuO_4$by the traveling solvent floating zone method (TSFZ), and to prepare La／sub 2-x／Sr／sub x／CuO$_4$single-crystalline thick films on the Zn-doped La$_2$$CuO_4$ substrate by new liquid phase epitaxial technique using an infrared heating furnace (IR-LPE). In this paper, Ireview growth of bulk single crystals and single-crystalline thick films of La／sub 2-x／Sr／sub x／$CuO_4$, and discuss on their device properties to develop high speed integrated electronic devices.

• 한국세라믹학회지
• /
• 제54권2호
• /
• pp.150-157
• /
• 2017

Three types of piezoelectric single crystals [PMN-PT (Generation I $[Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3]$), PMN-PZT (Generation II $[Pb(Mg_{1/3}Nb_{2/3})O_3-Pb(Zr,Ti)O_3]$), PMN-PZT-Mn (Generation III)] were grown by the solid-state single crystal growth (SSCG) method, and their dielectric and piezoelectric properties were measured and compared. Compared to (001) PMN-PT and PMN-PZT single crystals, the (001) PMN-PZT-Mn single crystals exhibited a higher transition temperature between the rhombohedral and tetragonal phases ($T_{RT}=144^{\circ}C$), as well as a higher coercive electric field ($E_C=6.3kV/cm$) and internal bias field ($E_I=1.6kV/cm$). The (011) PMN-PZT-Mn single crystals showed the highest coercive electric field ($E_C=7.0kV/cm$), and the highest stability of $E_C$ and $E_I$ during 60 cycles of polarization measurement. These results demonstrate that both Mn doping (for higher electromechanical quality factor ($Q_m$)) and a (011) crystallographic orientation (for higher coercive electric field and stability) are necessary for high power transducer applications of these piezoelectric single crystals. Specifically, the (011) PMN-PZT-Mn single crystal (Gen. III) had the highest potential for application in the fields of SONAR transducers, high intensity focused ultrasound (HIFU), ultrasonic motors, and others.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.2909-2916
• /
• 2000

6.5wt% Si steel is widely known as an excellent magnetic material because its magnetostriction is nearly zero. The AX magnetic properties as magnetostriction of 6.5% Si steel were evaluated and compared with those of conventional 3% Si steel sheet. In this paper, the fracture behavior of the poly crystals and single crystals of Fe-6.5wt%Si alloy has been observed. Single crystals were prepared by Floating Zone(FZ) method, which melts the alloy by the use of high temperature electron beam in pure argon gas condition. And the single crystals were annealed at 500$^{\circ}C$ and 700$^{\circ}C$ respectively and tensile tested at room temperature. According to the result, B2 phase has more good elongation than DO$_3$ phase. It was also found that the fracture surfaces of the single crystals have hairline facets in same direction, and the facets change the direction according to the single crystal phase.

• Progress in Superconductivity
• /
• 제11권2호
• /
• pp.92-95
• /
• 2010

$SrPd_2Ge_2$ single crystals were grown by self-flux method. Several shiny plate-like single crystals were obtained. The crystal structure and lattice parameters were characterized using the x-ray diffractometor, which indicates the crystals are in a single phase of $ThCr_2Si_2$-type. We confirmed superconducting transition temperature at 2.7 K by measuring magnetization and electrical resistivity.

• Journal of the Korean Physical Society
• /
• 제73권11호
• /
• pp.1729-1734
• /
• 2018

Organic-inorganic halide perovskite single crystals undergo phase transition of being cubic, tetragonal, or orthorhombic depending on the temperature. We investigated the $CH_3NH_3PbBr_{3-x}I_x$ single crystals grown by the inverse temperature crystallization method with temperature-dependent UV-Vis absorption and photoluminescence. From the temperature-dependent absorption measurement, the optical band gap is extracted by derivation of absorption spectrum fitting and Tauc plot. In our results, $CH_3NH_3PbBr_{3-x}I_x$ single crystals show that an abrupt change in optical band gap, PL peak position and intensity appears around 120 K - 170 K regions, indicating the phase transition temperature.

• 한국세라믹학회지
• /
• 제55권2호
• /
• pp.166-173
• /
• 2018

In order to investigate the effect of Mn on the dielectric and piezoelectric properties of PMN-PT [$Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3$], four different types of 71PMN-29PT samples were prepared using the solid-state single crystal growth (SSCG) method: (1) Undoped single crystals, (2) undoped polycrystalline ceramics, (3) Mn-doped single crystals, and (4) Mn-doped polycrystalline ceramics. In the case of single crystals, the addition of 0.5 mol% Mn to PMN-PT decreased the dielectric constant ($K_3{^T}$), piezoelectric charge constant ($d_{33}$), and dielectric loss (tan ${\delta}$) by about 50%, but increased the coercive electric field ($E_C$) by 50% and the electromechanical quality factor ($Q_m$) by 500%, respectively. The addition of Mn to PMN-PT induced an internal bias electric field ($E_I$) and thus specimens changed from piezoelectrically soft-type to piezoelectrically hard-type. This Mn effect was more significant in single crystals than in ceramics. These results demonstrate that Mn-doped 71PMN-29PT single crystals, because they are piezoelectrically hard and simultaneously have high piezoelectric and electromechanical properties, have great potential for application in fields of SONAR transducers, high intensity focused ultrasound (HIFU), and ultrasonic motors.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 춘계학술발표회
• /
• pp.99-100
• /
• 1993

Calorimetric (D.S.C) studies were carried out on the nylon 4,6 single crystals grown from 1,4-butanediol solution at various crystallisation temperatures, based on the assessment of the lamellar thickness by small angle x-ray scattering. Samples were annealed mainly ot get rid of residual solvents inside the crystals. The effect of annealing on the crystal perfection is inferred from the measured thermal properties of the crystals. Accordig to the scanning rates less than 80 K/min., D. S C. melting peaks indicate that changes in the internal morphology of nylon 4,6 crystals preapred at different crystallisation temeratures yield a thermodynamic melting temperature. Tm, of 319 $^{\circ}C$, for the infinitely extended crystal thickness (1/ι). The obtained heat of fusion value for the inginite crystal thickness, Ho, was 270 J/g from the plot of measured feat of fusion ($\Delta$Hm) vs. reciprocal crystal thickness (1/ι). based on these values, the fold surface energy, $\delta$e. of 65.4 erg/$\textrm{cm}^2$ was obtained from Hoffman-Waeeks equation. The thermodynamic melting temperature and heat of fusion of the infinite crystal thickness for the solution grow nylon 4,6 single crystals are found to be higher than of the reported corresponding solution grown nylon 6,6 single crystals. pbtained crystallinity from D. S. C measurements ranges from 40 to 50 %, which is close to the reported yalue for the nylon 6,6 single ctystals but lower than we expected.

• 한국세라믹학회지
• /
• 제27권4호
• /
• pp.536-542
• /
• 1990

Single crystals of YBa2Cu3O7-x have been grown in BaCuO2 flux at temperature of 125$0^{\circ}C$ and examined using XRD, EDAX and light microscopy. The YBCO crystals were grown in a cavity which was formed by the reduction of CuO and became large by the directional solidification in the crucible. The observed crystal growth habit is square planar with the c-axis normal to the plane. The surface morphology of grown crystals were growth ledges and growth sprial paterns on a (001) face.

• 한국세라믹학회지
• /
• 제27권4호
• /
• pp.447-456
• /
• 1990

ZnWO4 single crystals were grown by Czochralski method. And the orientation of grown crystals were determined by Laue back reflection, and the crystals were siliced at (100), (010), (001) face before polishing. The morphologys and distribution of etch pits on each face were observed by optical microscopy. In the present study, we understood that dislocation distributjioon rely on shape of solid-liquid interface, and secondary phase acts on the dislocation source. We also observed dislocation trace(etch pits) of (100) slip plane on (010) cleavage plane.