• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.185-190
• /
• 2007

For the successful design of heat exchangers, it is very important to understand local heat transfer characteristics on the circular cylinder of the cross flow heat exchangers. In this study, the heat exchanger using screen is developed to enhance heat transfer. The naphthalene sublimation technique is employed to measure the local heat transfer coefficients in the heat exchanger. The experiments are performed for single circular tube, in-line array tube bank with and without heat transfer promoter. Local Nusselt numbers of single circular tube and tube bank with heat transfer promoter are investigated and compared to those of without heat transfer promoter.

• Journal of the Korean Society of Tobacco Science
• /
• v.17 no.1
• /
• pp.57-61
• /
• 1995

Black shank(Phytophthora parasitira roar. nicotianae) resistant burley tobacco (Nicotiana tabacum L.) germplasms, KB 104 and KB 106, were developed by Korea Ginseng & Tobacco Research Institute. KB 104 was developed from the single cross of Burley 21$\times$Newton 77, using a modified pedigree method. KB 104 was highly resistant to black shank, and its agronomic characteristics and chemical contents were comparable to those of Burley 21, and value per 10a was slightly higher than Burley 21, KB 106 is a maternally derived doubled haploid made by N. africana method from the single cross of Burley 21$\times$ Va 509. KB 106 was also highly resistant to black shank, had two more harvestable leaves per plant and flowered three days later than Burley 21 did. Total alkaloid and nicotine contents of KB 106 were significantly lower than those of Burley 21. But its nornicotine content was higher than Burley 21 5. Key wads : Burley tobacco germplasm, Black shank resistance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1156-1161
• /
• 2001

Acoustic intensity is usually estimated by the cross-spectrum of acoustic pressure at two adjacent microphones. The cross-spectrum calculated by digital Fourier transform technique will unavoidally have leakage error since the period of signal will not be usually coincident with record length. Therefore, the acoustic intensity estimated by the conventional FFT analyzer will show distorted value. In this paper, the expression of the Fourier transformed date of a harmonic signal with a single frequency is formated when there is leakage error. The method to elimate the effect of leakage error from the contaminated data is also proposed. Some numerical examples show the validation of the proposed method.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.17 no.2
• /
• pp.131-139
• /
• 1988

The thermoacoustic oscillation induced in an air column with variable cross section area is investigated theoretically and experimentally. The onset condition of the oscillation is derived by equating the acoustic power production to the power dissipation. The power production at the heater is predicted by using the efficiency factor obtained by heat transfer analysis for a single wire in a uniform cross flow and considering the interference between heater wires. The power dissipation is estimated by measuring the attenuating coefficient from the pressure decay curve. The theoretical prediction to the onset condition of the oscillation is confirmed experimentally. The effect of the variation of the column cross section area on the onset condition is presented.

• Membrane and Water Treatment
• /
• v.2 no.2
• /
• pp.75-89
• /
• 2011

The predicting equations for mass transfer rate in cross-flow rectangular dialyzers with double flow and recycle, have been derived by mass balances. The recycling operation has two conflicting effects. One is the desirable effect of the increase in fluid velocity, resulting in an increased mass transfer coefficient. The other is the undesirable effect of the reduction in concentration difference due to remixing, resulting in decreased mass-transfer driving force. In contrast a single-pass device without recycling, considerable improvement in mass transfer is achieved if the cross-flow rectangular dialyzer of same size is operated with double pass and external recycling. It is concluded that recycle can enhance mass transfer, especially for larger reflux ratio.

• Journal of Communications and Networks
• /
• v.14 no.5
• /
• pp.554-565
• /
• 2012

In this paper, we study a cross-layer and end-to-end optimization problem for the integrated wireless and wireline network that consists of one wireline core network and multiple wireless access networks. We consider joint end-to-end flow control/distribution at the transport and network layers and opportunistic scheduling at the data link and physical layers. We formulate a single stochastic optimization problem and solve it by using a dual approach and a stochastic sub-gradient algorithm. The developed algorithm can be implemented in a distributed way, vertically among communication layers and horizontally among all entities in the network, clearly showing what should be done at each layer and each entity and what parameters should be exchanged between layers and between entities. Numerical results show that our cross-layer and end-to-end optimization approach provides more efficient resource allocation than the conventional layered and separated optimization approach.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12spc
• /
• pp.636-642
• /
• 2021

Vehicular Ad hoc Networks (VANET's) are gaining popularity in research community with every passing year due to the key role they play in Intelligent Transportation System. Their primary objective is to provide safety, but their potential to offer a variety of user-oriented services makes them more attractive. The biggest challenge in providing all these services is the inherent characteristics of VANET itself such as highly dynamic topology due to which maintaining continuous communication among vehicles is extremely difficult. Here comes the importance of routing solutions which traditionally are designed using strict layered architecture but fail to address stringent QoS requirements. The paradigm of cross-layer design for routing has shown remarkable performance improvements. This paper aims to highlight routing challenges in VANET, limitations of single-layer solutions and presents a survey of cross-layer routing solutions that utilize the information from the MAC layer to improve routing performance in VANET.

• Journal of Korean Vacuum Science & Technology
• /
• v.1 no.1
• /
• pp.38-44
• /
• 1997

Epitaxial growth of SiC films on Si(111) substrates without carbonization was carried out n the temperature range of 900-100$0^{\circ}C$ under high vacuum conditions by single source chemical vapor deposition (CVD) of 1,3-disilabutane (H$_3$SiCH$_2$SiH$_2$$CH_3$). The monocrystalline nature of the films was confirmed by XRD, RHEED and cross-sectional TED. Cross-sectional TEM image indicated that no void exists and the boundary is clear and smooth at the SiC-Si(111) interface. RBS and AES analyses also showed that the films are stoichiometric and homogeneous in depth, From the results, this single source growth techniqe of using 1,3-disilabutane has been found suitable and effective for epitaxial growth of stoichiometric SiC on Si(111) without carbonization at temperatures below 100$0^{\circ}C$.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.124-126
• /
• 2008

Grid Connected inverter is produced current to deliver power to grid. To provide low THD current, LCL filters is effective to filter high frequency component of current output from inverter. To provide sinusoidal waveform, there are many researchers have been proposed several controllers for grid-connected inverter controllers. Synchronous Reference Frame (SRF)-based controller is the most popular methods. SRF-based controller is capable for reducing both of zero-steady state error and phase delay. But SRF based controller is contained cross-coupling components, which generate some difficulties to analyze. In this paper, SRF based controller is analyzed. By applying decoupling control, cross-coupling component is eliminated and single phase model of the system is obtained. Through this single phase model, gain controller is designed. To reduce steady state error, proportional gain is set as high as possible, but it may produce instability. To compromise between a minimum steady state error and stability, the single phase model is evaluate through Root Locus and Bode diagram. PSIM simulation is used to verify the analysis.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.53-60
• /
• 2021

Foreign direct investment (FDI) is especially important for developing countries. This study investigates the determinants of FDI in the case of Indonesia. Most empirical researches in this field used time series data of a single country or panel data of several countries. Although panel data analysis is more comprehensive, however results taken from cross-country analysis cannot be directly applied to any specific country in the dataset and therefore lacks practicality. In this research, panel data analysis of a single country is performed to overcome the aforementioned shortcomings. Five determinants of FDI are tested using panel data of 33 Indonesian provinces over 10-year period of time. Two methodologies are adopted, random/fixed effects model and Granger Causality. The results show that only market size significantly affects FDI when tested using both methodologies. Human capital and financial market development show significant result in one of the two methodologies. While, economic growth and infrastructure did not show any significant results at all. This research stresses the importance of comprehensive single country analysis since only one out of five commonly discussed determinants is applicable in the case of Indonesia. Governments should therefore carefully reconsider the use of cross-country analysis as a basis of their policy formulations.