• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12A
• /
• pp.941-948
• /
• 2009

In the 3GPP LTE systems, SC-FDMA is adopted for the uplink owing to its good PAPR efficiency. In the frequency domain, however, the performance of SC-FDMA is degraded due to frequency selective fading. As a compromise, a Hybrid OFDMA/SC-FDMA was proposed in the LTE-Advanced systems. Hybrid scheme uses SC-FDMA in the edge of cell area, while it uses OFDMA nearby the base-station. In this paper, uplink relays based on hybrid scheme is proposed to increase the performance of the 3GPP LTE systems. With different positions of mobile and relay, the proposed scheme can adaptively select SC-FDMA or OFDMA to improve the link performance. Our simulation results show that the proposed scheme achieves a better performance in terms of end-to-end BER and power consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.1013-1021
• /
• 2004

In the WCDMA mobile multimedia communication system, the adaptive array antenna IS adopted to improve the performance of the system by reducing inter-user interference using antenna beam control. Usually, the interference resulted from the higher data rate users is much more significant to the lower data rate users than the other way around, so the overall performance can be enhanced by reducing the interference from higher data rate users. In order to maximize the efficiency of adaptive antenna operation, an optimal call admission control, especially during handoff, adaptive to the data rates is a critical problem. In this paper, We propose a call admission control algorithm based on the Soft QoS concept for the efficient processing of the handoff of higher data rate calls, and an adaptive handoff control mechanism according to the data rates. The proposed algorithm has been evaluated by computer simulation that it accommodates high data rate users among many lower data rate users much better, and the average call blocking probability for lower rate users becomes much lower than the conventional call admission control algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1B
• /
• pp.16-23
• /
• 2009

This paper investigates how many optimal routes can be established in terms of a given wireless mesh routing metric. Although many of routing metrics have been devised to precisely derive the wireless link quality in mesh, most (if not all) metrics have not been evaluated their optimality along with routing protocols. We consider stateof-the-art routing metrics and a widely accepted routing protocol in order to observe the optimality of established routes varying the number of source nodes. Also, we propose a unidirectional routing to deal with possible link asymmetry feature in wireless links. Through comparative simulation evaluations, we show that the portion of optimally established routes becomes less as the network traffic load increases, regardless of employed metrics, network topologies, and routing protocols.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5C
• /
• pp.556-564
• /
• 2007

This paper proposes an efficient scheme to track a time variant channel induced by multi-path Rayleigh fading in mobile MIMO-OFDM systems with null sub-carriers. The proposed adaptive channel tracking scheme removes in the frequency domain the interfering signals of the other transmit (Tx) antennas by using a predicted channel frequency response before starting the channel estimation. Time domain channel estimation is then performed to reduce the additive white Gaussian noise (AWGN). The simulation results show that the proposed method is better than the conventional channel tracking method [3] in time varying channel environments. At a Doppler frequency of 300 Hz and bit error rates (BER) of 10-3, signal-to-noise power ratio (Eb/N0) gains of about 2.5 dB are achieved relative to the conventional channel tracking method [3]. At a Doppler frequency of 600 Hz, the performance difference between the proposed method and conventional one becomes much larger.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.526-534
• /
• 2014

In this paper, for the WiMedia Distributed Medium Access Control (D-MAC) protocol based on UWB. performance degradation due to the Distributed Reservation Protocol (DRP) conflict problem caused by devices' mobility is analyzed. And a DRP relay protocol and a DRP conflict resolution (CR) are proposed to overcome the performance degradation at DRP conflicts. In order to give the loser device at DRP conflicts a chance to maintain resources, the proposed DRP relay protocol executed at each device helps the loser device reserve an indirect link maintaining the required resources via a relay node. Simulation results considering the mobile environment have indicated that the DRP relay combined with the CR prevent the throughput decrease even though mobility of devices increases.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.2179-2187
• /
• 1999

To privide multimedia mobile communication services for the users in scattered locations, the application ATM cells efficiently in wireless communications, it is effective to the use TDMA method. However, it is necessary to have methods to compensate the CDV(cell delay variation) caused by the difference between TDMA-ATM and cell stream multiplexing of the users. This paper optimizes the cell control time(Tc) when VBR traffic inputs have MMPP by applying CDV characteristics of time stamp method, which has the most advantages among compensation methods of CDV. This paper suggests a cell stream multiplex method employing time stamp techniques to reduce CDV for wireless suggest method shows that CDV distribution and cell stream multiples rangd can be controlled to 1.2${\times}$Tc which reduced over the VBR service in the TDMA-WATM transmission. This paper also presents evaluation of the suggested architecture obtained simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9A
• /
• pp.790-795
• /
• 2011

The need for broadband wireless data networks such as IEEE 802.16e WiMAX systems increases as a variety of wireless information devices like smart phones are adopted rapidly in everyday life. Since most of mobile applications employ TCP as their transport layer protocol, the performance improvement of TCP in WiMAX systems is crucial. This paper proposes an efficient method to transmit uplink piggyback ACK packets by exploiting the uplink packet buffering which happens because of the resource allocation scheme of the WiMAX systems. The proposed method can support not only the ACK filtering but also the merging of the piggyback ACK packets. As a result, the bandwidth reduction in the piggyback ACK packet transmission leads to the improvement of the downlink throughput. The simulation results show that the bandwidth for the ACK packets reduces more than 90%, and the downlink throughput increases at least 30%.

• Journal of Convergence Society for SMB
• /
• v.6 no.3
• /
• pp.21-27
• /
• 2016

In this paper, we introduce the PB/MC-CDMA (Partial Block/Multi-Carrier-Code Division Multiple Access) system to mitigate inter-cell interference (ICI) and enhance user capacity in the small cell environment. In 5G mobile communications, the number of devices connected to the network is expected to increase exponentially with the expansion of the IoT (Internet of Things) services. In addition, each device is expected to be required by the various data rates by their content types. In LTE/LTE-A, there are some limitations that large scale connectivity and supporting various data rates. Therefore, we introduce a PB/MC-CDMA physical layer system which is suitable for the small cell environment, and evaluate the performance in the multi cell environment which is affected by ICI. Through computer simulation results, we demonstrate the effectiveness of PB/MC-CDMA for the small cell environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3425-3430
• /
• 2013

The fast-growing market in wireless communications has led to the development of multi-standard mobile terminals. In this paper, a frequency-tunable active RC bandpass filter for multi-standards wireless communication system is designed using an active inductor. The conventional bandpass filter design methods employ the high order filter or high quality factor Q to improve the stopband attenuation characteristics and frequency selectivity of the passband. The proposed bandpass filter based on the high Q active inductor has an improved frequency characteristics. The center frequency and gain of the designed bandpass filter is tuned by employing the tuning circuit. We have performed the simulation using TSMC $0.18{\mu}m$ process parameter to analyze the characteristics of the designed active RC bandpass filter. The bandpass filter with Q=20.5 has 90MHz half power bandwidth at the center frequency of 1.86GHz. Moreover, the center frequency of the proposed bandpass filter can be tuned between 1.86~2.38GHz for the multi-standards wireless communication system using the capacitor of the tuning circuit.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.4
• /
• pp.165-172
• /
• 2002

In the next generation mobile communications, powerful channel coding is essential in order to obtain high quality multimedia services. Turbo code can achieve good error performance by iterative decoding, but more iterations result in additional computational complexity and delay. Thus, a method to reduce the number of iterations without additional performance degradation is needed. Turbo code with CRC is known to be the most efficient method to reduce the number of iterations. In this scheme, the performance may be degraded by the edge-effect like the conventional turbo code without CRC. In this paper, a method to eliminate the edge-effect is proposed by adopting D-parameter to the conventional s-random interleaver. As results of simulation, the edge-effect of the turbo code with CRC is shown to be successfully eliminated by using the new interleaver designed with D-parameter.