• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11A
• /
• pp.1803-1811
• /
• 2001

In this paper, Forward Error Correction(FEC) that is satisfied with ITU-T Recommendation J.83, Annex B(North American Data Over Cable Service Interface Specifications(DOCSIS) for Multimedia Cable Network System(MCNS)) is analyzed. The FEC consist of Reed-Solomon(RS) layer, interleaving layer, randomization layer, and trellis coded modulation(TCM) layer. The effects of quantization of input symbol and of trace-back depth in the Viterbi decoder are simulated over AWGN channels.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.446-459
• /
• 2016

In this paper, we propose virtual direction multicast (VDM) for video multicast applications on peer-to-peer overlay networks. It locates the end hosts relative to each other based on a virtualized orientation scheme using real-time measurements. It builds multicast tree by connecting the nodes, which are estimated to be in the same virtual direction. By using the concept of directionality, we target to use minimal resources in the underlying network while satisfying users' quality expectations. We compare VDM against host multicast tree protocol.We simulated the protocol in a network simulator and implemented in PlanetLab. Results both from simulation and PlanetLab implementation show that our proposed technique exhibits good performance in terms of defined metrics.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.17-20
• /
• 2000

This paper presents the simulated results of proposed interworking methods those are possible to seamless contact by ATM advantage of MPOA network and MPLS network, which was based on ATM. First, we compared operations and characteristics of MPOA and MPLS, and Proposed to consideration and structure for interworking. In this result, we described to interworking methods and proposed to requirement interworking function of LER. For performance analysis of interworking methods, we make a comparative study of the simulation result.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.408-411
• /
• 2004

In this paper, we evalvated two main QoS supporting routing protorol on wireless ad hoc network. At Presence wireless mobile communication focuses on how to efficiently support mobility of users more than QoS guarantee. However, in order to satisfy requirement of various applications which have been or will be served, QoS support service between source and destination becoming a very important issue. Of all routing protocols, DSR and AOUV are very improtant routing protocol in MANET. So we simulated DSR and AODV QoS Routing Protocol Through simulation evaluation tool NS(Network Simulation) based on various environments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.19-26
• /
• 2007

This paper presents a precision position control of induction motor using disturbance observer to reduce disturbance effects. It shows that proposed algorithm is strong in induction motor precision control for disturbance change. This system with disturbance observer using deadbeat control, which has high benefit, is good for quick disturbance compensation. To show this effectiveness the whole process is simulated by simulink, and also experimented by DSP6416 with TCP-IP network board.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.317-322
• /
• 2004

In this paper, It was describe the processes of development of HiFi speaker system. Woofer and tweeter were fabricated by unskilled students and their 1.5 parameters were identified by known mass method. Based on T-S parameters port enclosure was designed and built by means of software. Acoustic radiation phenomena of port enclosure were simulated and compared to test result. Acoustic pressure difference between lower frequency and higher frequency was flattened by adopting optimal crossover network. Finally, built HiFi speaker system was showed good sound quality and sound pressure and electrical impedance was well agreed with test results each other.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.3
• /
• pp.272-278
• /
• 2010

A method for damage detection in a plate structure is presented based on strain waves that are generated by impact or damage in the structure. Strain responses from continuous sensors, which are long ribbon-like sensors made from piezoceramic fibers or other materials, were used with a neural network technique to estimate the damage location. The continuous sensor uses only a small number of channels of data acquisition and can cover large areas of the structure. A grid type structural neural system composed of the continuous sensors was developed for effective damage localization in a plate structure. The ratios of maximum strains and arrival times of the maximum strains obtained from the continuous sensors were used as input data to a neural network. Simulated damage localizations on a plate were carried out and the identified damage locations agreed reasonably well with the exact damage locations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1134-1141
• /
• 2008

As sensor network technologies developed, the sphere field of application is escalated unfortunately, the applicable size is smaller than the actual quantity of cattle in feedlot. In this paper, we simulated and evaluated biological data transmission performance of virtual cattle feedlot. Deducted conclusions show us a more efficient cattle control scenario is required and effective routing protocol design and modification are needed.

• Smart Structures and Systems
• /
• v.23 no.4
• /
• pp.393-403
• /
• 2019

Applying more features gives us better accuracy in modeling; however, increasing the inputs causes the curse of dimensions. In this paper, a new structure has been proposed for fault detecting and identifying (FDI) of high-dimensional systems. This structure consist of two structure. The first part includes Auto-Encoders (AE) as Deep Neural Networks (DNNs) to produce feature engineering process and summarize the features. The second part consists of the Local Model Networks (LMNs) with LOcally LInear MOdel Tree (LOLIMOT) algorithm to model outputs (multiple models). The fault detection is based on these multiple models. Hence the residuals generated by comparing the system output and multiple models have been used to alarm the faults. To show the effectiveness of the proposed structure, it is tested on single-shaft industrial gas turbine prototype model. Finally, a brief comparison between the simulated results and several related works is presented and the well performance of the proposed structure has been illustrated.

• International Journal of Computer Science & Network Security
• /
• v.21 no.9
• /
• pp.358-361
• /
• 2021

In this paper, we have simulated a rectangular microstrip patch antenna for aerospace applications based on graphen as a conductor and a multilayer substrate .as a result of the use of the graphen patch we obtained a reconfigurable antenna on the frequency range (0.6-0.7 terahertz) with a gain up to 12 db. The simulation of this antenna has been performed by using CST Microwave Studio, which is a commercially available finite integral based electromagnetic simulator.