• 전력전자학회논문지
• /
• 제25권1호
• /
• pp.6-12
• /
• 2020

In recent years, the demand for the distribution of energy resource has been increasing. However, the output power is limited by the stability of the distribution network. This study proposes an active distribution network that can reconfigure the distribution line using an active phase controller. The conventional distribution network has a fixed structure, whereas the proposed active distribution network has a variable structure. Therefore, the active distribution network can increase the output power of the distribution energy resource and reduce the overload of distribution line facilities. The active phase controller has two operation modes to minimize the circulating current during dynamic reconfiguration. In this study, the voltage and current control algorithms are proposed for the active phase controller. The proposed method for the active phase controller is simulated via PSIM simulation.

• Agricultural and Biosystems Engineering
• /
• 제1권1호
• /
• pp.30-37
• /
• 2000

Wet porous media representing agronomic soil that contains variable water content with variable electrolyte concentration was measured to study the shape of the curves of the electric double layer capacitance versus frequency (from 10 KHz to 10 MHz. This was done in an attempt to find the lowest practical operating frequency for developing low cost dielectric constant soil moisture probes. Cellulose sponge was used as the porous media. A high frequency electronic bridge circuit was developed for measuring the equivalent network parallel resistance and capacitance of porous media. It appears that the effects of the electric double layer component of the total parallel network capacitance essentially disappear at operating frequencies greater than approximately 25 MHz at low electrolyte concentrations but are still important at 50 MHz at higher concentrations. At these frequencies, the double layer capacitance masks the diffusion region capacitance where true water content capacitance values reside. The general shape of the curve of volumetric water content versus porous media dielectric constant is presented, with an empirical equation representing data for this type of curve. It was concluded that the lowest frequency where dielectric constant values which represent true water content information will most likely be found is between 30 and 50 MHz at low electrolyte concentrations but may be above 50 MHz when the total electrolyte concentration is near the upper level required for most mesophyte plant nutrition.

• 대한교통학회지
• /
• 제17권5호
• /
• pp.111-122
• /
• 1999

소화물 일관 운송 과정에서 발생하는 직접비용을 최소화하는 수리 모형과 해법이 제안되었다. 고려되는 비용으로는 화물 운송을 위한 차량 운행에 필요한 제반 비용인 링크 비용과 터미널에서 일어나는 하차, 분류, 재적 재등 하역 작업에서 발생하는 노드 비용을 감안하였고 총비용을 줄이기 위한 화물의 운송 경로가 모형의 결정변수이다. 해법으로는 최종해의 품질은 다소 미흡하나 계산 시간이 짧은 Steepest Descent Method와 최종해의 품질이 우수하나 계산 시간이 많이 소요되는 Simulated Annealing Method를 활용한 두개의 알고리즘이 고안되었다. 최적해를 찾아가기 위한 탐색의 출발점이 되는 초기해는 Dijkstra의 최단경로 알고리즘을 수정하여 찾는다. 예제를 통하여 알고리즘의 계산 과정을 설명하였고 제시된 두 방법의 최종해는 초기해에 비하여 비용 측면에서 각각 12%. 15%의 절감 효과가 있음을, 적재율 측면에서 초기해의 62.6%에서 각각 774%. 87.4% 향상됨을 확인하였다.

• 한국정보처리학회논문지
• /
• 제4권2호
• /
• pp.456-464
• /
• 1997

본 논문에서는 클래스내부와 클래스간의를 확정하게 제어할 수 있는 랜덤 프로세스 모델을 제어하는 프리세스 내부의 파라메다들을 변화시키며, 프로세스간의 통계적인 차이와 랜덤 잡음을 변화시켜 학습을 위한 패턴들을 생성한다. 이 랜덤 프로세스 모델에서 생성된 패턴들을 이용하여 역전파알고리즘으로 학습된 다단 신경망의 성능 성능을 평가한다. 평가 실험결과는 패턴 분류문제에서 일반화된 통계적인 거리가 분류문제의 난이도에 대한 좋은 예측기가 되는 것을 보여 준다. 또한 본 논문에서는 다단신경망의 성능과 베이스패턴분류기의 성능을 비교하기 위하여 베이스분류기의 이론적인 성능분석과 모의실험을 통한 평가를 하였다. 다단신경망의 분류성능이 이론적인 성능과 실헝치와 매우 근사하며 그 두 성능 중간에 위치함을 발견하였다.

• 전력전자학회논문지
• /
• 제10권1호
• /
• pp.45-51
• /
• 2005

본 논문에서는 서치코일이 장착된 SRM(Switched Reluctance Motor)의 정지시 회전자 위치를 추정하는 방법을 비교하여 제시하였다. 서치코일이 장착된 SRM은 초기에 정지상태이므로 서치코일에서 유기기전력이 발생하지 않는다. 따라서 정지상태에서 회전자의 위치를 검출하기 위한 방법이 필요하게 된다. 본 논문에서는 유클리디안 제곱거리, 퍼지, 신경망 등 세 가지 방법을 이용하여 회전자의 위치 추정을 위한 시뮬레이션을 실행하였고 그 결과를 비교하였다. 또한 시뮬레이션 결과가 우수한 유클리디안 제곱거리를 이용하여 회전자 위치 추정을 위한 실험을 실시하여 본 논문에서 제안한 방법의 타당성을 검증하였다.

• Smart Structures and Systems
• /
• 제29권5호
• /
• pp.729-746
• /
• 2022

In this paper, a nonlinear structural model updating methodology based on the Deep Belief Network (DBN) is proposed. Firstly, the instantaneous parameters of the vibration responses are obtained by the discrete analytical mode decomposition (DAMD) method and the Hilbert transform (HT). The instantaneous parameters are regarded as the independent variables, and the nonlinear model parameters are considered as the dependent variables. Then the DBN is utilized for approximating the nonlinear mapping relationship between them. At last, the instantaneous parameters of the measured vibration responses are fed into the well-trained DBN. Owing to the strong learning and generalization abilities of the DBN, the updated nonlinear model parameters can be directly estimated. Two nonlinear shear-type structure models under two types of excitation and various noise levels are adopted as numerical simulations to validate the effectiveness of the proposed approach. The nonlinear properties of the structure model are simulated via the hysteretic parameters of a Bouc-Wen model and a Giuffré-Menegotto-Pinto model, respectively. Besides, the proposed approach is verified by a three-story shear-type frame with a piezoelectric friction damper (PFD). Simulated and experimental results suggest that the nonlinear model updating approach has high computational efficiency and precision.

• Journal of electromagnetic engineering and science
• /
• 제18권2호
• /
• pp.117-128
• /
• 2018

In this paper, compact linear dual polarized series-fed $1{\times}2$ linear and $2{\times}2$ planar arrays antennas for airborne SAR applications are proposed. The proposed antenna design consists of a square radiating patch that is placed on top of the substrate, a quarter wave transformer and $50-{\Omega}$ matched transformer. Matching between a radiating patch and the $50-{\Omega}$ microstrip line is accomplished through a direct coupled-feed technique with the help of an impedance inverter (${\lambda}/4$ impedance transformer) placed at both horizontal and vertical planes, in the case of the $2{\times}2$ planar array. The overall size for the prototype-1 and prototype-2 fabricated antennas are $1.9305{\times}0.9652{\times}0.05106{{\lambda}_0}^3$ and $1.9305{\times}1.9305{\times}0.05106{{\lambda}_0}^3$, respectively. The fabricated structure has been tested, and the experimental results are similar to the simulated ones. The CST MWS simulated and vector network analyzer measured reflection coefficient ($S_{11}$) results were compared, and they indicate that the proposed antenna prototype-1 yields the impedance bandwidth >140 MHz (9.56-9.72 GHz) defined by $S_{11}$<-10 dB with 1.43%, and $S_{21}$<-25 dB in the case of prototype-2 (9.58-9.74 GHz, $S_{11}$< -10 dB) >140 MHz for all the individual ports. The surface currents and the E- and H-field distributions were studied for a better understanding of the polarization mechanism. The measured results of the proposed dual polarized antenna were in accordance with the simulated analysis and showed good performance of the S-parameters and radiation patterns (co-pol and cross-pol), gain, efficiency, front-to-back ratio, half-power beam width) at the resonant frequency. With these features and its compact size, the proposed antenna will be suitable for X-band airborne synthetic aperture radar applications.

• International Journal of Computer Science & Network Security
• /
• 제21권1호
• /
• pp.143-151
• /
• 2021

The enormous prevalence of transferring official confidential digital documents via the Internet shows the urgent need to deliver confidential messages to the recipient without letting any unauthorized person to know contents of the secret messages or detect there existence . Several Steganography techniques such as the least significant Bit (LSB), Secure Cover Selection (SCS), Discrete Cosine Transform (DCT) and Palette Based (PB) were applied to prevent any intruder from analyzing and getting the secret transferred message. The utilized steganography methods should defiance the challenges of Steganalysis techniques in term of analysis and detection. This paper presents a novel and robust framework for color image steganography that combines Linear Congruential Generator (LCG), simulated annealing (SA), Cesar cryptography and LSB substitution method in one system in order to reduce the objection of Steganalysis and deliver data securely to their destination. SA with the support of LCG finds out the optimal minimum sniffing path inside a cover color image (RGB) then the confidential message will be encrypt and embedded within the RGB image path as a host medium by using Cesar and LSB procedures. Embedding and extraction processes of secret message require a common knowledge between sender and receiver; that knowledge are represented by SA initialization parameters, LCG seed, Cesar key agreement and secret message length. Steganalysis intruder will not understand or detect the secret message inside the host image without the correct knowledge about the manipulation process. The constructed system satisfies the main requirements of image steganography in term of robustness against confidential message extraction, high quality visual appearance, little mean square error (MSE) and high peak signal noise ratio (PSNR).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권5호
• /
• pp.1077-1093
• /
• 2013

This paper proposes a new network coordinator node design to select the most suitable wireless technology for WBANs by using fuzzy logic. Its goal is to select a wireless communication technology available considering the user/application requirements and network conditions. A WBAN is composed of a set of sensors placed in, on, or around human body, which monitors the human body functions and the surrounding environment. In an effort to send sensor readings from human body to medical center or a station, a WBAN needs to stay connected to a local or a wide area network by using various wireless communication technologies. Nowadays, several wireless networking technologies may be utilized in WLANs and/or WANs each of which is capable of sending WBAN sensor readings to the desired destination. Therefore, choosing the best serving wireless communications technology has critical importance to provide quality of service support and cost efficient connections for WBAN users. In this work, we have developed, modeled, and simulated some networking scenarios utilizing our fuzzy logic-based NCN by using OPNET and MATLAB. Besides, we have compared our proposed fuzzy logic based algorithm with widely used RSSI-based AP selection algorithm. The results obtained from the simulations show that the proposed approach provides appropriate outcomes for both the WBAN users and the overall network.

• 한국전자통신학회논문지
• /
• 제9권3호
• /
• pp.387-392
• /
• 2014

최근에 전기자동차의 상용화가 머지않은 상황에서 운전자를 위한 다양한 전자적 기능들이 개발되어지고 있다. 특히, 뇌파(EEG)를 통하여 운전자의 상태를 모니터링하면서 졸음방지나 건강상태를 실시간으로 점검하는 기능들이 있다. 자동차 운전자의 뇌파를 의료기관 서버에 전송하여 관련 기능들을 제공할 수 있는데 이때 자동차간 또는 자동차와 노변장치간의 원활한 통신기능이 필수적이다. 따라서 본 논문에서는 도심의 교차로환경에서 원활한 EEG 통신기능을 제공하는 라우팅 프로토콜을 제시하기 위해 AODV, DSR, GRP, OLSR, TORA와 같은 5가지의 라우팅 프로토콜로 운영되는 무선통신망을 각각 설계하고 이를 OPnet 네트워크 시뮬레이션을 통하여 성능을 평가하고 결과를 제시하고자 한다.