• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.209-216
• /
• 2007

Fatigue life prediction methodology of the rubber component made of vulcanized natural rubber under variable amplitude loadings was studied. The displacement-controlled fatigue tests were conducted at different levels and the maximum Green-Lagrange strain was selected as damage parameters. A fatigue life curve of the rubber represented by the maximum Green-Lagrange strain was determined from the nonlinear finite element analysis. The transmission load history of SAE as variable amplitude loading was used to perform the fatigue life prediction. And then a signal processing of variable loading by racetrack and simplified rainflow cycle counting methods were performed. The modified miner's rule as cumulative damage summation was used. Finally, when the gate value is 30%, the predicted fatigue life of the rubber component agreed well with the experimental fatigue lives with a factor of two.

• Korean Journal of Radiology
• /
• v.20 no.1
• /
• pp.102-113
• /
• 2019

Objective: To assess the accuracy and potential bias of computed tomography (CT) ventricular volumetry using semiautomatic three-dimensional (3D) threshold-based segmentation in repaired tetralogy of Fallot, and to compare them to those of two-dimensional (2D) magnetic resonance imaging (MRI). Materials and Methods: This retrospective study evaluated 32 patients with repaired tetralogy of Fallot who had undergone both cardiac CT and MRI within 3 years. For ventricular volumetry, semiautomatic 3D threshold-based segmentation was used in CT, while a manual simplified contouring 2D method was used in MRI. The indexed ventricular volumes were compared between CT and MRI. The indexed ventricular stroke volumes were compared with the indexed arterial stroke volumes measured using phase-contrast MRI. The mean differences and degrees of agreement in the indexed ventricular and stroke volumes were evaluated using Bland-Altman analysis. Results: The indexed end-systolic (ES) volumes showed no significant difference between CT and MRI (p > 0.05), while the indexed end-diastolic (ED) volumes were significantly larger on CT than on MRI (93.6 ± 17.5 mL/m² vs. 87.3 ± 15.5 mL/m² for the left ventricle [p < 0.001] and 177.2 ± 39.5 mL/m² vs. 161.7 ± 33.1 mL/m² for the right ventricle [p < 0.001], respectively). The mean differences between CT and MRI were smaller for the indexed ES volumes (2.0-2.5 mL/m²) than for the indexed ED volumes (6.3-15.5 mL/m²). CT overestimated the stroke volumes by 14-16%. With phase-contrast MRI as a reference, CT (7.2-14.3 mL/m²) showed greater mean differences in the indexed stroke volumes than did MRI (0.8-3.3 mL/m²; p < 0.005). Conclusion: Compared to 2D MRI, CT ventricular volumetry using semiautomatic 3D threshold-based segmentation provides comparable ES volumes, but overestimates the ED and stroke volumes in patients with repaired tetralogy of Fallot.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.9
• /
• pp.4587-4592
• /
• 2012

Purpose: This study used receiver operating characteristic curve to analyze Surveillance, Epidemiology and End Results (SEER) neuroblastoma (NB) and other peripheral nerve cell tumors (PNCT) outcome data. This study found under usage of radiotherapy in these patients. Materials and methods: This study analyzed socio-economic, staging and treatment factors available in the SEER database for NB and other PNCT. For the risk modeling, each factor was fitted by a generalized linear model to predict the outcome (soft tissue specific death, yes/no). The area under the receiver operating characteristic curve (ROC) was computed. Similar strata were combined to construct the most parsimonious models. A random sampling algorithm was used to estimate the modeling errors. Risk of neuroendocrine (other endocrine including thymus as coded in SEER) death was computed for the predictors. Results: There were 5261 patients diagnosed from 1973 to 2009 were included in this study. The mean follow up time (S.D.) was 83.8 (97.6) months. The mean (SD) age was 18 (25) years. About 30.45% of patients were un-staged. The SEER staging has high ROC (SD) area of 0.58 (0.01) among the factors tested. We simplified the 4-layered risk levels (local, regional, distant, un-staged/others) to a simpler 3-tiered model with comparable ROC area of 0.59 (0.01). Less than 50% of PNCT patients received radiotherapy (RT) including the ones with localized disease. This avoidance of RT use occurred in adults and children. Conclusion: The high under-staging rate may have precented patients from selecting definitive radiotherapy (RT) after surgery. Using RT for, especially, adult PNCT patients is a potential way to improve outcome.

• Journal of Korean Society for Quality Management
• /
• v.44 no.3
• /
• pp.541-552
• /
• 2016

Purpose: In this study, we propose that how to approach a effective system engineering and optimize system engineering management process for the mass production weapon system parts localization development process and success in DTaQ. Methods: To approach a effective system engineering for the mass production weapon system parts localization, we analyze a weapon system acquisition process and system engineering process of Republic of Korea and DTaQ parts localization business regulations in advance. after results of analysis of them, we implement a optimized parts localization development system engineering based on ISO/IEC/IEEE 15288. Results: In order to apply International Standard ISO/IEC/IEEE 15288 to the mass production weapon system parts localization development process, we compare the mass production weapon system parts localization acquisition environment with ISO/IEC/IEEE 15288 and analyze them. therefore, It is possible to implement a part of concept stage and development stage of ISO/IEC/IEEE total life cycle stage for the mass production weapon system parts localization development process. To achieve the technical review milestones of DTaQ parts localization business regulations in the selected stages of ISO/IEC/IEEE, the development and management agency perform 2 high rank process and 19 low rank process specified in ISO/IEC/IEEE. Conclusion: When the development and management agency perform the mass production weapon system parts localization development using the proposed system engineering approach, they should easily meet milestone through the clarified requirement and simplified System Engineering output documents in limited development period.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.9
• /
• pp.882-889
• /
• 2010

Semi-active vibration control is one of the attractive control methods for space application due to its robustness as passive damping system and much higher damping performance than passive system. However, a chattering induced by the sudden variation of damping force at the time of On-Off switching of semi-active control device degrades pointing performance of the on-board payload. In this paper, to enhance the pointing performance of the on-board payload, we proposed a semi-active vibration isolation with a strategy for attenuating chattering effect. Numerical simulation results using simplified analysis model indicated that the proposed semi-active control strategy produced much better isolation performance than the conventional Bang-Bang control semi-active control laws derived from skyhook and LQ theories.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.550-563
• /
• 1999

A wavelet-Galerkin scheme based on the time-dependent Maxwell's equations is presented. Daubechies wavelet with two vanishing wavelet moments is expanded for basis function in spatial domain and Yee's leap-frog approach is applied. The shifted interpolation property of Daubechies wavelet family leads to the simplified formulations for inhomogeneous media without the additional matrices for the integral or material operator. The stability condition is formulated. The dispersion characteristics are analyzed and compared with those of finite difference time domain and multiresolution time domain methods. The analyses show the excellent trade-off between the regularity and the support width of the basis function. Although the basis function has only two vanishing wavelet moments, it is enough to provide negligible dispersive error in the numerical analysis and its compact support enables only several involved terms per nodes. The storage effectiveness, execution time reduction and accuracy of this scheme are demonstrated by calculating the resonant frequencies of the homogeneous and inhomogeneous cavities.

• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.884-894
• /
• 2013

In this paper, we investigate the characteristics of power amplifiers and simplified memoryless non-linear power amplifier models for energy efficient communication system. First, we present the transfer function of GaAs FET (Gallium Arsenide Field Effect Transistor) that is widely used for high power amplifier. From those investigations, we introduce the instantaneous efficiencies and methods of amplification by assuming that the saturated current is constant, while perfect linearity is exploited under knee voltage. Then, we discuss four non-linear power amplifier models in a baseband signal processing. Finally, we explain the specified total power consumption model in a base station to achieve the resonable analysis for energy efficient communication.

• Journal of Korean Biological Nursing Science
• /
• v.22 no.4
• /
• pp.249-259
• /
• 2020

Purpose: Carbapenemase-producing Enterobacteriaceae (CPE) are associated with considerable mortality. This study was aimed to identify survival factors among medical care unit patients with CPE. Methods: We conducted a retrospective cohort; data were collected from September 2017 to June 2019 through electronic medical records. The data collected were general characteristics, disease-related characteristics, severity-related characteristics, and treatment-related characteristics. Data were analyzed based on frequency, mean, standard deviation, Chi-square test, Fisher's exact test, t-test, Pearson's correlation coefficient, and Cox proportional hazard model using SPSS/WIN 21.0 program. Results: Seventy-seven patients were included (59 survivors and 18 deceased) in the study. Univariate analysis identified factors for survival associated with acquired CPE as age (t= -1.56, p= .037), simplified acute physiology 3 (SAPS3) score of admission date (t= -2.85, p= .006), Glasgow coma scale (GCS) of CPE acquisition date (t= 2.38, p= .020), artery catheter at CPE acquisition date (χ²= 4.58, p= .032), vasoconstrictor agents use at CPE acquisition date (χ²= 6.81, p= .009), platelet at CPE acquisition date (t= 2.27, p= .025), lymphocyte at CPE acquisition date (t= 2.01, p= .048), calcium at CPE acquisition date (t= 2.68, p= .009), albumin at CPE acquisition date (t= 2.29, p= .025), and creatinine at CPE acquisition date (t= 2.24, p= .028). Multivariate Cox proportional hazard model showed that GCS at CPE acquisition date (HR= 1.14, 95% CI= 1.05-1.22), lymphocyte at CPE acquisition date (HR= 1.05, 95% CI= 1.00-1.10), and creatinine at CPE acquisition date (HR= 1.25, 95% CI= 1.04-1.49) were independent survival factors among medical intensive care unit patients with CPE. Conclusion: Based on the study results, it is necessary to develop nursing interventions that can aid in the management of patients with CPE and identify their effects.

• Journal of Gifted/Talented Education
• /
• v.17 no.2
• /
• pp.251-279
• /
• 2007

The purpose of this study was to develop a comprehensive model to identify underachieved gifted children in elementary schools by utilizing multiple methods. From March 1st, 2006 through September 30th, 2006, we developed and applied a 6-step comprehensive identification model for underachieved gifted children by examining 1980 children attending S elementary school located in Daegu Metropolitan City, starting from the first step of teacher nomination to the last step of committee's final decision. As a result, 4 students were identified as underachieved gifted children. For comprehensive and appropriate identification, we adopted, adjusted, or developed several standardized tests, teacher nomination form, parental questionnaire, self-report checklist, and school achievement tests, which were fine-tuned in the application process of this identification model. Based on this study, we suggest that a comprehensive identification model for underachieved gifted children in public elementary schools consist of 6 steps: a) teacher nomination, b) simplified standardized testing, c) student's self-report, d) multiple standardized tests, e) qualitative analysis, and f) a committee decision for the final identification.

• Composites Research
• /
• v.26 no.1
• /
• pp.29-35
• /
• 2013

Composite sandwich structure can improve the specific bending stiffness significantly and save the weight nearly 30 percent compared with the composite laminates. However, it has more inherent uncertainties of the material property caused by manufacturing process than metals. Therefore, the reliability-based probabilistic design approach is required. In this paper, the PMS(Probabilistic Margin of Safety) is calculated for the simplified fuselage structure made of composite sandwich to provide the probabilistic reasonable evidence that the classical design method based on the safety factor cannot ensure the structural safety. In this phase, the probability density function estimated by CMCS(Crude Monte-Carlo Simulation) is used. Furthermore, the RBDO(Reliability-Based Design Optimization) under the probabilistic constraint are performed, and the RBDO-MPDF(RBDO by Moving Probability Density Function) is proposed for an efficient computation. The examined results in this paper can be helpful for advanced design techniques to ensure the reliability of structures under the uncertainty and computationally inexpensive RBDO methods.