• Journal of Korean Biological Nursing Science
• /
• v.4 no.2
• /
• pp.127-137
• /
• 2002

The purpose of this study was to compare the hand disinfection effect of waterless alcohol gel hand washing agent with that of soap and water, 4% chlorhexidine gluconate, and 10% povidone-iodine. Hands of fourty subjects were artificially contaminated with Acinetobacter baumannii $5m{\ell}$ and randomly distributed to each hand washing methods. Samples were collected from gloved hand by glove juice sampling procedure. Mean log reduction after hand washing were compared with baseline values. Number of microorganisms were converted to log and tested by ANOVA in SPSSWIN 10.0. Mean log reduction of soap and water, alcohol gel, 4% chlorhexidine gluconate, 10% povidone-iodine were $2.76{\pm}0.62$, $2.97{\pm}0.56$, $4.66{\pm}1.70$, $4.60{\pm}0.91$, respectively. The bactericidal effect of alcohol gel was similar to that of soap and water, but the effect was much less than chlorhexidine gluconate and povidone-iodine(p<0.001). In terms of microorganism reduction, the efficacy of waterless alcohol gel was almost the same as soap and water hand washing. Further evaluation of the bactericidal effect of waterless alcohol gel is needed because waterless alcohol gel is simple, convenient, and non-irritating hand washing agent and also very effective in busy hospital environment.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.537-543
• /
• 2003

This paper presents the improved procedure to assess static and dynamic strength of crawler type excavators. A fully integrated model including front attachment and chassis was prepared for structural analysis. In this paper, two types of loading input methods were investigated and the method imposing digging force directly on bucket tooth was more convenient than imposing cylinder reaction force on cylinder pin even if the two methods showed no discrepancy in analysis results. Static strength analysis was carried out for eight analysis scenarios based on two extreme digging positions, maximum digging reach position and maximum digging force positions. The results from static strength analysis were compared with measured stresses, cylinder pressures and digging forces and showed a good quantitative agreement with measured data. Dynamic strength analysis was carried out for simple reciprocation of boom cylinders. It was recognized that the effect of compressive stiffness of hydraulic oil was very important for dynamic structural behavior. The results from dynamic strength analysis including hydraulic oil stiffness were also compared with measured acceleration data and showed a qualitative agreement with measured data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1990.10a
• /
• pp.53-58
• /
• 1990

The use of spreadsheet packages for solving noise control problems has been cited by several authors, eg Saha[1] and Thornton[2]. The effectiveness of using spreadsheet packages compared with the traditional computer programs written in high level languages was demonstrated when applied to relatively simple problems, such as the selection of hearing protectors or the prediction of noise equation which includes logarithmic additions at most represents the physics of the problem. The simplicity of the governing equation together with the requirement to handle a vast amount of data are considered to be the major reasons for noise control engineers to use spreadsheet packages. Although shipboard noise prediction seems to be very complicated, the calculation procedure itself is, in essence, identical especially true for prediction methods based on empirical formulae[3,4], ie the procedure that consists of the three basic elements, ie source, path and receiver. This paper discusses the application of spreadsheet package LOTUS 1-2-3 to shipboard noise prediction problems. A utility program of the package is written using macro functions and is shown to be especially useful for noise control engineers who are unfamiliar with spreadsheet packages. In addition, a new type of empirical formula, to estimate structureborne noise transmission loss, is proposed.

• Steel and Composite Structures
• /
• v.1 no.3
• /
• pp.295-312
• /
• 2001

The purpose of this paper is to propose a new type of steel reinforced concrete (SRC) beam-column joints and to examine the structural performance of the proposed joints, which simplify the construction procedure of steel fabrication, welding works, concrete casting and joint strengthening. In the proposed beam-column joints, the steel element of columns forms continuously built-in crossing of H-sections (${\Box}$), with adjacent flanges of column being connected by horizontal stiffeners in a joint at the level of the beam flanges. In addition, simplified lateral reinforcement (${\Box}$) is adopted in a joint to confine the longitudinal reinforcing bars in columns. Experimental and analytical studies have been carried out to estimate the structural performance of the proposed joints. Twelve cruciform specimens and seven SRC beam-column subassemblage specimens were prepared and tested. The following can be concluded from this study: (1) SRC subassemblages with the proposed beam-column joints show adequate seismic performances which are superior to the demand of the current code; (2) The yield and ultimate strength capacities of the beam-to-column connections can be estimated by analysis based on the yield line theory; (3) The skeleton curves and the ultimate shear capacities of the beam-column joint panel are predicted with a fair degree of accuracy by considering a simple stress transfer mechanism.

• Structural Engineering and Mechanics
• /
• v.64 no.4
• /
• pp.437-447
• /
• 2017

Explicit expressions for rapid prediction of inelastic design quantities (considering cracking of concrete) from corresponding elastic quantities, are presented for multi-storey composite frames (with steel columns and steel-concrete composite beams) subjected to service load. These expressions have been developed from weights and biases of the trained neural networks considering concrete stress, relative stiffness of beams and columns including effects of cracking in the floors below and above. Large amount of data sets required for training of neural networks have been generated using an analytical-numerical procedure developed by the authors. The neural networks have been developed for moments and deflections, for first floor, intermediate floors (second floor to ante-penultimate floor), penultimate floor and topmost floor. In the case of moments, expressions have been proposed for exterior end of exterior beam, interior end of exterior beam and both interior ends of interior beams, for each type of floor with a total of twelve expressions. Similarly, in the case of deflections, expressions have been proposed for exterior beam and interior beam of each type of floor with a total of eight expressions. The proposed expressions have been verified by comparison of the results with those obtained from the analytical-numerical procedure. This methodology helps to obtain the inelastic design quantities from the elastic quantities with simple calculations and thus would be very useful in preliminary design.

• Journal of the Korean Arthroscopy Society
• /
• v.2 no.2
• /
• pp.159-163
• /
• 1998

We reviewed the cases of 35 knees of 34 patients who had arthroscopic debridement for degenerative osteoarthritis of the knee. The patients were followed up for an average of 29 months (range: 13 months to 45 months). The mean age of the patients at operation was 54 years (range: 44 years to 75 years). At the time of follow up, the patients were evaluated using the nine-point scale by Baumgaertner et al. We divided the knee into 4 stages according to the classification system by Jackson et al. Satisfactory results were achieved in 80%(stage I), 75%(stage II), 55.6%(stage III) and 25%(stage IV) of the patients. Arthroscopic debridement is of significant value in the earlier stages of degenerative osteoarthritis (stage I and II) for the symptom relief as a simple procedure with rare complication as well as in the later stages(stage III and IV) as a time buying procedure before the total knee arthroplasty.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.104-110
• /
• 2012

The spindle with a built-in motor can be used to simplify the structure of machine tool system, while the rotor has unbalance mass inevitably. A high-speed spindle can be very sensitive to rotating mass unbalance which has harmful effect on many machine tools. Therefore, the balancing procedure to reduce vibration in rotating system is certainly needed for all high-speed spindles. So, it was performed with a spindle-bearing system for CNC automatic lathe by using numerical procedure. The spindle is supported by the angular contact ball bearings and the motor rotor is fixed at the middle of spindle. The spindle-bearing system has been investigated using combined methodologies of finite elements and transfer matrices. The balancing was performed through influence coefficient method and the comparison was made by whirl responses between before balancing and after balancing. As a result, balancing of simple spindle model reduced whirl orbit magnitude in case of a completely assembled spindle model.

• Analytical Science and Technology
• /
• v.8 no.2
• /
• pp.167-170
• /
• 1995

A simple and rapid permanganate value test procedure for the estimation of COD, based on the photometric measurement of the remained permanganate after the color bleaching by oxygen demand organics during digestion, has been described. Optimized conditions were 1% NaOH, 0.6mM $KMnO_4$, with a closed reflux in the boiling water bath for 90 sec using sample size of 5mL.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.479-484
• /
• 1996

This paper describes a method of measuring tilt motion. This method measures the tilt motion of drilling machines using a laser interferometer, a simple sliding linear bearing, measurement of the probe and the LSC(least square center) method. The next order of business is discussing the procedure of measurement. First, The measured position is considered to be the point of contact between the drill shank and the probe. The revolution of the drill axis delivers the point of contact to the probe. Second, because the laser interferometer is attached on the sliding linear bearing, any movement of probe influences laser reflector. Thus, the laser program displays the moving factor of laser reflector. Namely, this is tilt factor. Third. the points of measurement are a full circle which has 8 points (each are 45$^{\circ}$), After it is finished measuring the 8 points, let the spindle of the drilling machine move down about 5 cm. Repeating this procedure three times, we can get tilt motion's values which are calculated by LSC method. Many error factors affect the accurate measurement of tilt motion. However in this paper we ignore some error factors because they are less significant than tilt motion.

• Journal of Chest Surgery
• /
• v.25 no.12
• /
• pp.1502-1507
• /
• 1992

Between February and July 1992, videothoracoscopic bullectomy was performed in nineteen patients with primary spontaneous pneumothorax. The indications of this surgery are recurrent in 12, persistent airleakage in 4 and previous contralateral pneumothorax in 3 patients. For the good operative field, we used double lumen endotracheal tube and put the CO2 gas into the thoracic cavity to make the lung collapse. We usually apply the endoGIA or electric cauterization for handling the bleb or bullae and there were 9 cases with of endoGIA only, 4 electric cauterization only and 6 both procedures. To evaluate the advantage of the Videothoracoscopic surgery, we compared surgical results with that of the tho-racotomy group[19 patients]. There were significant differences in operative time[93.8$\pm$41.9 min and 17.1$\pm$53.9 min, p< 0.01] and postoperative airleakage duration[35.6$\pm$113.3 hours and 117.9$\pm$214.4 hours, p<0.05] between the Videothoracoscopy and thoracotomy group. Tube indwelling time was shortened in Videothoracoscopy group[p<0.05]. The hospital stay was very short[p<0.01] and the patients needed analgesic injection less frequentley in videthoracoscopic group[p<0.05] In conclusion, we prefer the Videothoracoscopic procedure to the thoracotomy in uncomplicateed patients with pneumothorax because of simple procedure and good results.