• Radiation Oncology Journal
• /
• v.14 no.2
• /
• pp.123-128
• /
• 1996

Purpose : This is a retrospective study to compare the Palliation rates, survival rates and complications of low dose rate and high dose rate endobronchial brachytherapy in the management of malignant airway obstruction. Materials and methods : Forty three consecutive patients with malignant airway compromise from primary or metastatic lung tumors were treated with low dose rate(LDR) endobronchial Iridium-192 insertion(21 patients) between October 1988 and June 1992, and high dose rate(HDR) endobronchial brachytherapy(22 patients) between August 1992 and April 1994 with palliative aim Flexible fiberoptic bronchoscopy under fluoroscopic control was utilized in all 91 procedures. Twenty seven LDR Procedures delivered a dose of 5-7.5 Gy to a 1.0 cm radius respectively. Results : Subjective and objective responses to treatments were evaluated on follow-up examinations by clinical examination, chest x-rays and CT scan of the chest on some patients. Fifteen of 21 LDR patients and 19 of 22 HDR Patients showed subjective improvement in terms of better breathing and less Productive cough as well as complete disappearance of hemoptysis. Objective improvement on chest x-rays and CT scan of the chest had been demonstrated on 8 LDR Patients and 10 HDR patients. Conclusion : The technique of LDR and HDR endobronchial brachytherapy is simple and well tolerated procedure with minimal morbidity It Provides excellent palliation by keeping airway Patent in these short life-spanned patients.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.7-17
• /
• 2007

An analysis and design theory of an aperture-coupled cavity-fed back-to-back microstrip directional coupler is presented for the efficient and optimized design. For this purpose, an equivalent network is developed, and simple but accurate calculations of circuit element values are described. Design equations of the coupler are derived based on the equivalent circuit. In order to determine various structural design parameters, the evolutionary hybrid optimization method based on the genetic algorithm and Nelder-Mead method is invoked. As a validation check of the proposed theory and optimized design method, a 10 dB directional coupler was designed and fabricated. The measured coupling was 10.3 dB at 3 GHz, and the return loss and isolation were 31.8 dB and 30.5 dB, respectively. The directional coupler also showed very good quadrature phase characteristics. Good agreements between the measured and the design specifications fully validate the proposed network analysis and design procedure.

• Journal of dental hygiene science
• /
• v.3 no.1
• /
• pp.1-4
• /
• 2003

The purpose of this paper is to present the potential application of tissue adhesive in the management of traumatized gingival wound in clinical dental hygiene practice. Cyanoacrylate adhesive has been used for closure of superficial laceration without suturing, which is available in periodontal and oral surgery. Small gingival or mucosal lacerations may occur by improper or excessive instrumentation of the dental hygienist during scaling and root planing procedure. In this circumstances, tissue adhesive is very effective, simple, and convenient method as an alternative to conventional wound closure by suturing. The tissue adhesive consists of monomeric n-butyl-2-cyanoacrylate, which polymerizes quickly in contact with tissue fluid. The sutureless treatment of gingival laceration with tissue adhesive has advantages of good esthetic results, less trauma, time saving, antibacterial and hemostatic effects. In addition, local anesthesia as well as re-visit for dressing and removal of suture are not required. Use of tissue adhesive could be beneficial to both dental hygienist and patient in the management of procedural error.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2648-2656
• /
• 2011

A simple HPLC-DAD method was developed and validated to determine B group vitamin content (thiamine, riboflavin, nicotinamide, pantothenic acid, pyridoxine and folic acid) in supplemented food samples, i.e., infant formula, cereal, low-calorie food, a multi-vitamin pill and a vitamin drink. In this study, the most significant advantages were simultaneous determination of the six B group vitamins in various food matrices and a small number of sample treatment steps that required only an organic solvent, acetonitrile. Moreover, this method prevents reduction of column durability, because the mobile phase does not contain ion-pairing reagents. Analytes were separated on a Develosil RPAQUEOUS $C_{30}$ (4.6 mm ${\times}$ 250 mm, 5 ${\mu}M$ particle size) column with a gradient elution of acetonitrile and 20 mM phosphate buffer (pH 3.0) at a flow rate between 0.8 and 1.0 mL/min. Detection was performed at 275 nm, except for that of pantothenic acid (205 nm). The calibration curves for all six vitamins showed good linearity with correlation coefficients ($r^2$) higher than 0.995. The developed method was validated with respect to linearity, intra- and inter-day accuracy and precision, limit of quantification (LOQ), recovery and stability. The method showed good precision and accuracy, with intra- and inter-assay coefficients of variation less than 15% at all concentrations. The recovery was carried out according to the standard addition procedure, with yields ranging from 89.8 to 104.4%. This method was successfully applied to the determination of vitamin B groups in supplemented food products.

• Journal of Chest Surgery
• /
• v.32 no.2
• /
• pp.175-180
• /
• 1999

Background: Since 1992, we developed the technique for video endoscopic sympathectomy to treat palmar hyperhidrosis. It was soon proven to be a simple and effective therapy for essential hyperhidrosis. Compensatory hyperhidrosis, however, is the main cause of patient dissatisfaction after video-assisted thoracoscopic sympathectomy. According to many authors, initial satisfaction rate was high(94-98%), but it was declined with time (66%) due to mainly to embarrassing side effects. Material and Method: From January 1992 to February 1998, the thoracoscopic T2 sympathicotomy, T2 sympathectomy and T2-4 sympathectomy were performed in 315 patients suffering from Essential hyperhidrosis in the Department of Thoracic and Cardiovascular Surgery in the Respiratory Center of Yongdong Severance Hospital Seoul, Korea. Eighty-nine patients underwent T2 sympathicotomy, and Eighty-eight patients underwent division T2 sympathectomy. Result: All of the treated patients obtained satisfactory alleviation of essential hyperhidrosis. The global rate of compensatory sweating were ; 64.0% in T2 sympathicotomy, 73.8% in T2 sympathectomy and 87.8% in T2-4 sympathectomy. The rate of embarrassing or disabling compensatory sweating was significantly higher in T2 sympathicotomy 15.7%(14/89) and in T2 sympathectomy 32.8%(28/88) than in T2-4 sympathectomy 58.0%(80/138) with significancy in statistic analysis(p<0.05). Video- assisted thoracoscopic sympathectomy is an effective minimally invasive and effective procedure. Conclusion: We suggest that the incidence and degree of compensatory hyperhidrosis was closely related to the extent of thoracic sympathectomy.

• Journal of Environmental Science International
• /
• v.25 no.4
• /
• pp.505-516
• /
• 2016

With the development of nanotechnology, nanomaterials are used in various fields. Therefore, the interest regarding the safety of nanomaterial use is increasing and much effort is diverted toward establishment of exposure assessment and management methods. Occupational exposure limits (OELs) are effectively used to protect the health of workers in various industrial workplaces. This study aimed to propose an OEL for domestic multi-walled carbon nanotubes (MWCNTs) based on animal inhalation toxicity test. Basic procedure for development of OELs was examined. For OEL estimation, epidemiological study and quantitative risk assessment are generally performed based on toxicity data. In addition, inhalation toxicity data-based no observed adverse effect level (NOAEL) and benchmark dose (BMD) are estimated to obtain the OEL. Three different estimation processes (NEDO in Japan, NIOSH in USA, and Baytubes in Germany) of OELs for carbon nanotubes (CNTs) were intensively reviewed. From the rat inhalation toxicity test for MWCNTs manufactured in Korea, a NOAEL of $0.98mg/m^3$ was derived. Using the simple equation for estimation of OEL suggested by NEDO, the OEL of $142{\mu}g/m^3$ was estimated for the MWCNT manufacturing workplace. Here, we used test rat and Korean human data and adopted 36 as an uncertainty factor. The OEL for MWCNT estimated in this work is higher than those ($2-80{\mu}g/m^3$) suggested by previous investigators. It may be greatly caused by different physicochemical properties of MWCNT and their dispersion method and test rat data. For setting of regulatory OELs in CNT workplaces, further epidemiological studies in addition to animal studies are needed. More advanced technical methods such as CNT dispersion in air and liquid should be also developed.

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.677-685
• /
• 2006

Control of the temperature difference across a section is an effective strategy to minimize the hydration-heat-induced cracks for the structures where internal restraint is dominant. The domestic code, however, overestimates probability of the crack occurrence judging from the foreign codes and construction experiences of real structures. Therefore, the background of the equation presented in the domestic code was investigated step by step to examine validity of the equation, and, as a result, it was found that the equation is established on a basis of simple elastic model where the change of elastic modulus in an early age is not considered. An advanced assessment strategy was proposed taking into account the hypoelastic model which corresponds to an incremental constitutive equation. The presented procedure resulted in an increased crack index, i.e. decreased crack risk, the value of which depends on various conditions of the mix and structures. Also, a prediction equation of the temperature difference was proposed which can readily consider the effect of the curing condition and ambient temperature in a hand calculation. For further study, the assessment equation may be more classified to strictly consider the characteristics of the mix and structures if the analytical and experimental data are accumulated.

• Journal of the Korea Convergence Society
• /
• v.7 no.5
• /
• pp.97-106
• /
• 2016

This study is to find the converging effects of the Complete Sciences Subjects(CSS) in high school before entrance to University on the scores of Basic Nursing Sciences(BNS) and Major Nursing Subjects(MNS) of 111 senior nursing students of one university. Using the SPSS 19.0, t-test, Pearson's correlation coefficient, multiple and simple linear regression were carried out. The mean scores of the groups that have completed the subjects of Biology I & II, Chemistry I & II were high on Anatomy, Physiology and Pathology. There was a significant difference between the group of completed Biology II and incompleted Biology II on the mean scores of MNS(p<.05). There were positive correlations between the CSS and the scores of BNS and MNS, a moderate correlation between Chemistry II and BNS(r=.303) and a strong correlation between BNS and MNS(r=.796). Explanation rate of CSS on the scores of BNS, and MNS were 18.2%, 8.2% respectively, and on the scores of BNS on MNS was 63.8%. The result of this study can be used in assessing university entrance procedure after repeated study, extended location and more participants, and to use for making pre-school program for the freshmen who didn't CSS.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.3
• /
• pp.263-269
• /
• 2001

Median cleft of the lower lip and/or mandible is a rare congenital anomaly, first mentioned by Couronne in 1819. Monroe(1966), Fujino(1970), Ranta(1984) and Oostrom(1996) conducted comprehensive reviews and list cases in literature. Median cleft varies greatly, from a simple vermilion notch to a complete cleft of the lip involving the tongue, the chin, the mandible, the supporting structures of the median of the neck, and the manubrium sterni. The associated anomalies include ankyloglossia, cleft tongue, neck contraction, heart lesion, absence of hyoid bone, and so on. The etiology of median cleft is unknown. Various possibilities, such as failure of mesodermal penetration into the midline, failure of fusion of mandibular processes, external factors apart from the embryogenic pattern such as pressure, position in utero, circulatory failure caused placental adhesion, diseases in pregnancy, and so on, have been discussed. A 8-year-old girl was referred to the Dept. of Oral & Maxillofacial Surgery, Kyungpook National University Hospital and had been aware of the fact that at birth "she had something wrong with her mouth." Shortly after birth she had been examined by a plastic surgeon and at that time surgical procedure had been performed to release the tongue from the lower jaw and lip at local hospital. On admission, she had a slight notching of lower lip and two fibrous frenum ran from the lip along the ventral surface of the tongue, diastema between her mandibular central incisors, and slightly constricted bifid mandible associated independent movement of the two halves of mandible. The patient had autogenous iliac bone graft to reconstruct the mandibular midline defect. The postoperative result was uneventful. In future, the correction of the soft tissue deformities such as notching of the lower lip and partial ankyloglossia will be required for the esthetic and functional improvement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.145-145
• /
• 2008

High-k materials have been paid much more attention for their characteristics with high permittivity to reduce the leakage current through the scaled gate oxide. Among the high-k materials, $ZrO_2$ is one of the most attractive ones combing such favorable properties as a high dielectric constant (k= 20 ~ 25), wide band gap (5 ~ 7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2$/Si structure. During the etching process, plasma etching has been widely used to define fine-line patterns, selectively remove materials over topography, planarize surfaces, and trip photoresist. About the high-k materials etching, the relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Among several etching techniques, we chose the inductively coupled plasma (ICP) for high-density plasma, easy control of ion energy and flux, low ownership and simple structure. And the $BCl_3$ was included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. During the etching process, the wafer surface temperature is an important parameter, until now, there is less study on temperature parameter. In this study, the etch mechanism of $ZrO_2$ thin film was investigated in function of $Cl_2$ addition to $BCl_3$/Ar gas mixture ratio, RF power and DC-bias power based on substrate temperature increased from $10^{\circ}C$ to $80^{\circ}C$. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by scanning emission spectroscope (SEM). The chemical state of film was investigated using energy dispersive X-ray (EDX).